Kodak CA2 User manual
Eastman Kodak Company
Rochester, NY 14650 U.S.A.
© Kodak, 2010. MC/MR/TM: Kodak. 4H7395
KODAK Dual USB Car
Adapter CA2
User Guide
This adapter is ideal for charging and powering MP3
players, cell phones, digital cameras, and other
USB-chargeable devices through the 12 V power socket in
your vehicle.
Features
• Powers/charges 1 or 2 USB devices
• Fast charging with 1.0 A USB ports
• Self-resetting internal fuse
• LED indicators
Operation
1. Connect your USB
device(s) to the
Car Adapter with
a USB cable.
2. Plug the Car
Adapter into a 12 V
power socket in
your vehicle.
The blue LED that
corresponds to the
USB port you used will illuminate when your device is
drawing current (at least 100 mA), and will go out
when your USB device is fully charged.
Specifications
Input Voltage 12-24V DC, 1 A
Output Voltage 5V DC
USB Output Current 1 A per USB port
Protection (input) 2.5 A self-resetting internal
fuse
Storage -4 to 158° F (-20 to 70° C)
Operation -4 to 131° F (-20 to 55° C)
IMPORTANT SAFETY
INSTRUCTIONS—Save These Instructions
• DANGER—TO REDUCE THE RISK OF FIRE OR
ELECTRICAL SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS.
• CAUTION: Use only in dry locations. Do not operate if
it has been subjected to electrical or physical shock or
other damage. Do not disassemble product.
• This product is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning the use of the product by a person
responsible for their safety.
• Children should be supervised to ensure that they do not
play with the product.
Support
Internet: www.kodak.com/go/support
www.kodak.com/go/contact
4H7395
EN
Regulatory Information
FCC compliance and advisory
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed or used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures: (1) reorient
or relocate the receiving antenna; (2) increase the separation
between the equipment and the receiver; (3) connect the
equipment to an outlet on a circuit dierent from that to which the
receiver is connected; (4) consult the dealer or an experienced
radio/TV technician for additional suggestions.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment. Where shielded interface cables have been
provided with the product or specified additional components or
accessories elsewhere defined to be used with the installation of the
product, they must be used in order to ensure compliance with FCC
regulation.
Canadian DOC statement
DOC Class B compliance—This Class B digital apparatus complies
with Canadian ICES-003.
Please consult www.kodak.com/go/REACH for information about
the presence of substances included on the candidate list according
to article 59(1) of Regulation (EC) No. 1907/2006 (REACH).
Waste Electrical and Electronic Equipment/Battery
Disposal
In Europe: For human/environmental protection, it is
your responsibility to dispose of this equipment and
batteries at a collection facility established for this
purpose (separate from municipal waste). For more
information, contact your retailer, collection facility, or appropriate
local authorities; or visit www.kodak.com/go/recycle. Product
weight: 30.5 g ( 1.08 oz)
