Kogan NBSWNGSLIDA User manual

KIDS SWING AND SLIDE
BASKETBALL ACTIVITY SET
NBSWNGSLIDA

WARNING: CHOKING HAZARD – Small parts. This product
contains small parts and is not suitable for children under 3 years old.
•Only to be installed on a stable surface.
•This product must only be assembled by an adult and used under the direct
supervision of a guardian.
•Adult assembly is required!
•Parent supervision is required when children are playing with the climber, swing
chair and slide.
•Keep all small parts and packaging materials of this product away from babies and
children, as they may cause serious choking hazards.
•Do not install in humid environments, or bathrooms.
•Do not install or store near heating/high temperature equipment.
•Do not hang on, pull at, or apply weight to the basketball hoop.
•Do not use it for other purposes than the product’s intention. Failure to follow this
warning may result in serious injury or damage.
•Recommended age: 3+
•Slide max load: 75 kg
•Swing chair max load: 35 kg
Imported by Kogan Australia Pty Ltd,
139 Gladstone Street, South Melbourne, Vic, 3205 Australia
SAFETY & WARNINGS

COMPONENTS

Part
Name
Qty
Part
Name
Qty
1
Side Panel
(x3)
10
Plugboard
(x1)
2
Rod
(x1)
11
Swing Seats
(x1)
3
Steps
(x4)
12
Side Seat Back
(x1)
4
Side Bar
(x1)
13
Swing Handrails
(x1)
5
Nut
(x19)
14
Small Nut
(x2)
6
Slide
(x1)
15
Half Button
(x1)
7
Basketball Hoop
(x1)
16
Screw
(x6)
8
Hoop Net
(x1)
17
Carabiner Fastener
(x2)
9
Swing Bar
(x1)
Not pictured: Basketballs (x3) and air pump (x1)

Step 1:
Insert the rod (2), the four steps (3) and the side bar (4) into the holes of the side panel (1),
following the below image for position reference.
ASSEMBLY

Step 2:
Use the nuts (5) to screw on one side of fitted parts (2, 3, 4). Do not overtighten, as this may
damage the threads of the parts.
Step 3:
Install the basketball hoop (7), securing with the nut (5). Fit the net (8) to the hoop.
Position the slide (6) and then install the middle side panel (1), fitting with the nuts (5).
Install the swing bar (9) and plugboard (10), fastening with the nuts (5).

Step 4:
Fit the half button and screw (15 and 16) to the rod (2), and fix the slide (6) with 15 and 16 to
secure.
Fit the remaining side panel (1) to 9 and 10 with the nuts (5).
Assemble the swing (parts 11-13) and attach to 9 with the carabiner fasteners (17).

NOTES

NOTES

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com