Kogan SHANGRI-LA User manual

PENNY PLAYHOUSE
ACTIVITY TABLE
WHITE/NATURAL
SLPENNATWNA

Hardware
1 Left roof panel 7 Chair side frame (x4)
2 Right roof panel 8 Chair back (x2)
3 Chimney 9 Chair cross bar (x4)
4 Side panel (x2) 10 Seat (x2)
5 Horizontal bar (x2) 11 Side bar (x4)
6 Support bar (x4)
ALong screw (x48) BBracket (x8) CShort screw (x16)
COMPONENTS

Step 1: Using a Phillips screwdriver, secure x2 chair side frames (7) together with x1 chair
back (8) and x2 chair cross bars (9) with x8 long screws (A). This creates a chair frame
assembly.
Repeat this process to create another chair frame assembly.
ASSEMBLY

Step 2: Flip a chair frame assembly upside down. Place a seat (10) onto the chair frame
assembly and attach the x4 brackets (B) as shown below.
Insert and tighten x8 short screws (C) through the holes of the brackets.
Repeat this process with the other chair frame assembly.

The chairs are now complete.

Step 4: Secure x2 side bars (11) to a side panel (4) using x6 long screws (A). This creates a
side panel assembly.
Repeat this process to create another side panel assembly.
Step 5: Secure x2 support bars (6) to one side panel assembly using x6 long screws (A).
Repeat this process with the other side panel assembly.

Step 6: Secure the horizontal bars (5) to the support bars (6) of each side panel assembly
using x8 long screws (A).
Step 7: Hook on and attach the right roof panel (2) onto the side panels (4).

Step 8: Attach the left roof panel (1) the same way onto the side panels (4).
Step 9: Place the chimney (3) between the left and right roof panes (1, 2).

Assembly complete.