Kogan KDFRSTDHMKA User manual

FREESTANDING HAMMOCK
TENT WITH CARRY CASE
KDFRSTDHMKA

Parts
Step 1
Open the frame and lock the four side hooks into position as per Fig. 1a.
Attach the top ends of the two main hooks to the outer locking position as per Fig. 1b.
Fig. 1a
Fig. 1b
ASSEMBLY

Step 2
Attach the knots to the left and right hooks of the frame as shown in Fig. 2a.
Fig. 2a
Fig. 2b
Step 3
Remove the fabric, aluminium alloy support rods and the top two pairs of short rods (shown
in Fig. 3a) and then assemble as per Fig. 3b.
Connect the two ends of the aluminium rod to the metal buckle hole on both sides of the
inner tent, as shown in Fig. 3d.
Attach the 4 pairs of loop-ended buckles as shown in Fig. 3e around the poles. The 4 corners
of the rectangular mesh at the top click onto the four buckles of the inner tent.
The hammock is now fully assembled.
Fig. 3a
Fig. 3b
Fig. 3c
Fig. 3d
Fig. 3e
Fig. 3f

Step 4
The hammock can be covered with a rain cover as shown in Fig. 4a.
Connect the buckle at both ends as shown in Fig. 4b. Roll up the tent doors when not
raining.
Windproof ropes and aluminium stakes (shown in Fig. 4c) can be used to secure the tent.
Fig. 4a
Fig. 4b
Fig. 4c
The included storage bag makes the storage and transportation of the hammock tent easy.

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com