2 | OPC524 Starting Instructions
STARTING INSTRUCTIONS
1. Adjust the Gas Lever 1to the far right.
2. Adjust the Choke Lever 2halfway to the right.
3. Turn and pop-up the Stop Switch 4on the feed chute of the machine.
4. Pull the Engine Cord 3to start spinning the drum.
5. Retract the Engine Cord 3and continue to pull the cord repeatedly, continually spinning
the drum by following this process 3 or 4 times.
6. Once the engine fires up, adjust the Choke Lever 2to the far right slowly as the engine
gains RPM.
1 3
4
2
