Kolpin Outdoors 34-8030 Installation and operating instructions

© 2018 Kolpin Outdoors Inc. REV 00
PLOW MOUNT KIT
FOR STAMPEDE AND HAVOC
P/N 34-8030
ASSEMBLY / OWNERS MANUAL
Application
PLOW PUS FRAME NO. 34-0000 or 34-0070
Before you begin, please read these instructions and check to be sure all parts and tools are ac-
counted for. The following instructions contain details required to install and service the contents of
this kit.

2
© 2018 Kolpin Outdoors Inc. REV 00
OPERATING INSTRUCTIONS
Congratulations! You’ve just purchased the most durable plow component in the industry. Kolpin plow components work great for
summer or winter plowing. With proper care and maintenance, your Kolpin plow system will last for years to come!
NOTICE
Plow o eration requires
additional com onents for o eration: Kolpin Plow
Blade, Kolpin Plow Push Frame, High Rise Plow
Push Frame, Winch Kit *
*These components may be specific to your vehicle.
Please read and understand all assembly instructions, notices and warnings before assembling and operating your Kolpin plow
system.
Follow these guidelines to ensure satisfactory o eration:
• Read this manual and your ATV/ UTV operators manual before use.
• Periodically check for wear and tightness of all fasteners. Replace or re-torque fasteners as necessary.
• Before first use, set plow in the furthest right or left angled position to check for interference with the vehicle.
• Operate with extreme caution on slopes and rough terrain. Be familiar with the area before you plow.
• Be aware of immovable objects that could be hidden in the area you are plowing.
• To avoid damage when pushing snow into a pile, reverse direction before raising the plow blade.
• Do not ram the plow blade into piles of snow.
• For best results, set the suspension preload of your ATV/ UTV to the stiffest setting.
• To reduce steering effort and increase mobility, set the air pressure of your tires to the maximum pressure specification.
• The plow skids are adjustable. General skid setting is even with the plow wear bar bottom edge, higher settings reduce the
chance of rocks and gravel from being collected.
• To increase traction during plow operation, operators can try: Securing weight to the ATV/ UTV for additional tire downforce,
reducing tire air pressure, or installing tire chains.
SAFETY INFORMATION
Our plow systems were designed with your safety in mind. Please read and understand all Cautions, Notices and Warnings in this
manual before you begin. In order to protect you and your ATV/UTV, certain parts of the plow system and/or hardware are designed to
fail when the equipment is over-stressed.
DANGER
TO AVOID SERIOUS INJURY OR DEATH:
1. DO NOT EXCEED 5 MPH (8 KMH) WITH BLADE INSTALLED.
2. OPERATE WITH EXTREME CAUTION ON SLOPES, STEEP GRADES, AND ROUGH TERRAIN.
3. ALLOW NO RIDERS ON BLADE OR ATV/UTV WHILE MOVING OR STATIONARY.
4. KEEP BYSTANDERS AWAY FROM THE BLADE OR ATV/UTV WHILE MOVING OR STATIONARY.
5. WHEN PUSHING HEAVY MATERIAL, DIRECTION CONTROL MAY BECOME DIFFICULT.
6. BEFORE ADJUSTING BLADE: STOP ATV/UTV ENGINE; SET AND LOCK BRAKES; RAISE AND LOCK BLADE
IN UP POSITION. DO NOT ATTEMPT TO RAISE BLADE BY HAND; USE THE LIFT MECHANISM ONLY.
7. LOWER BLADE TO DOWN POSITION WHEN BLADE AND ATV/UTV ARE NOT IN USE.
8. READ BLADE'S INSTRUCTION SHEETS AND ATV/UTV OWNER MANUAL.
! !

3
© 2018 Kolpin Outdoors Inc. REV 00
Kit Contents:
Item Qty Part Descri tion Part Number
11Stampede avoc Mount Plate -
21Clamping Plate -
32Spacer Sleeve -
42ex Bolt, Zinc Plated, M8 x 1.25 x 60mm LG -
53Carriage Bolt, Zinc Plated, M8-1.25 x 30mm LG -
69Flanged Lock Nut, Zinc Plated M8 x 1.25 -
71Flat Washer, Zinc Plated, M10 -
91Instruction Guide (not shown) -
84Carriage Bolt, Zinc Plated, M8-1.25 x 25mm LG -
1
6
8
2
5
5
6
7
3
6
6
6
4
5

4
© 2018 Kolpin Outdoors Inc. REV 00
BEFORE YOU BEGIN:
• Your Kol in accessory is exclusively designed for
your vehicle
• Please read and understand all instructions
• Verify all arts and tools are accounted for
• To ensure a satisfactory installation, follow all ste s
correctly and in the sequence described
• Kee these instructions for future reference or for
informational requests
• To facilitate installation, make sure that your vehicle
is clean and free of debris
• All directions referring to right and left are when the
rider is sitting on the machine
• The lastic skid late will need to be modified to be
reinstalled on the vehicle.
TOOLS REQUIRED:
• Basic Metric Wrench and Socket Set
APPROXIMATE ASSEMBLY TIME: 15 minutes
Note: Additional time may be required to accommodate other installed
accessories.
Note: If any hardware is missing, do not return to the store. Call us to
help, Toll Free 1-877-956-5746.
S are Kit Notes:
• S are kits may contain extra hardware that is used for other mount kits. Extra hardware can be discarded.
• U-bolts su lied in s are kits may be longer than original and may need to be cut to size.
SPARE KITS
Hardware kit
P/N 34-0011
Item Descri tion
4ex Bolt, Zinc Plated, M8-1.25 80mm LG 2x
6Flange Locknut, Zinc Plated, M8-1.25 12x
7Flat Washer, Zinc Plated, M10 4x
8, 5 Carriage Bolt, Zinc Plated, M8-1.25 x 25mm LG 8x
- Spring Lock Washer, Zinc Plated, M8 2x
- ex Locknut, Zinc Plated, M8-1.25 4x
- Round U-Bolt, Zinc Plated, M8-1.25 x 65mm 2x
- ex Bolt, Zinc Plated, M8-1.25 90mm LG 2x
- ex Bolt, Zinc Plated, M8-1.25 35mm LG 2x
- ex Bolt, Zinc Plated, M10-1.5 x 25mm LG 4x
- Spring Lock Washer, Zinc Plated, M10 4x
- Flat Washer, Zinc Plated, M8 4x
- Round U-Bolt, Zinc Plated, M8-1.25 x 90mm 2x

5
© 2018 Kolpin Outdoors Inc. REV 00
Mount Installation:
1. From under the vehicle, insert the Clamping Plate
(item #2) into position in the chassis hole just
behind front differential as shown. (See illustrations
1-1 and 1-2).
2. Insert the longer carriage bolts (item #5) into the
clamping plate (item #2) and thru the front hole in
the chassis as shown. (See illustration 1-2).
Ill. 1-1
Insert Item #2 through
the hole in the bottom
of the chassis
Ill. 1-2
Item #2
shown in
position
#5
FRONT
FRONT

6
© 2018 Kolpin Outdoors Inc. REV 00
Mount Installation (continued):
3. Attach the Mount Plate (item #1) to the Clamping
Plate (Item 2) using the longer carriage bolts (item
#5) and M8 lock nuts (item #6) as shown. Do not
tighten at this time. Insert the M10 washer (item #7)
to function as a spacer between the mount plate
front hole and vehicle chassis as shown on parts
page 3. (See illustration 1-4).
Note, the bent lip
rear edge of the mount plate will face upwards
into the vehicle to function as a stop preventing
the mount from sliding backwards.
4. Install the long M8 hex bolts (item #4) thru the outer
two holes of mount plate (item #1) and then thru the
spacer sleeve (item #3) and thru the vehicle frame
holes as shown. Fasten with M8 lock nuts (item #6).
(See illustrations 1-3 and 1-4).
5. Tighten all hardware to specification.
Ill. 1-3
#4
#1
Ill. 1-4
FRONT
FRONT
#3
#4
8MM FASTENER TORQUE:
17 ft. lbs. (23 Nm)
#6
#8

7
© 2018 Kolpin Outdoors Inc. REV 00
Mount Installation (continued):
6. The universal mount plate (not included in this kit) will
be attached to the Stampede avoc mount plate as
shown. The shorter M8 carriage bolts (item #8) will
fasten the universal plate with the M8 locknuts (item
#6). (See illustration 1-5).
7. Tighten all hardware to specification.
8MM FASTENER TORQUE:
17 ft. lbs. (23 Nm)
Universal Mount
Plate (not included)
mounting location
Ill. 1-5
FRONT
Ill. 1-6
#4
FRONT
#3
#6

8
© 2018 Kolpin Outdoors Inc. REV 00
One Year Limited Warranty
For the period of one (1) year from the purchase date, Kolpin will replace for the original purchaser,
free of charge, any part or parts found upon examination by Kolpin to be defective in material,
workmanship, or both.
All transportation costs incurred submitting product to Kolpin for warranty consideration must be
borne by the purchaser. If Kolpin determines that the product must be returned to the factory for
credit, please call 1-877-956-5746 for a Return Merchandise Authorization (RMA) number and
shipping instructions.
This warranty does not apply to parts that have been damaged by accident, alteration, abuse,
improper maintenance, normal wear, or other causes beyond the manufacturer’s control. In order to
protect you and your ATV, certain parts of the plow system and/or hardware are designed to fail
when the equipment is over-stressed. Parts that are lost due to loosening and improper
maintenance are not covered under warranty. This warranty does not cover removal or reinstallation
labor fees of the plow system and related components.
Peripheral products such as engines, electric motors, and actuators may carry an original
manufacturer’s warranty. Most hardware is general in nature and is easily obtained locally. Be sure
to replace with minimum metric class 8.8 specification.
Kol in Outdoors, Inc.
Tele hone: (763)-478-5800
Toll Free: (877)-956-5746
Fax Number: (800)-245-7569
www.kol in.com
Email: customerservice@kol in.com