Kolpin Outdoors Rhino Grip XLR Instruction sheet

1
© 2020 Kolpin Outdoors Inc. REV 00
Rhino Grip XLR - Polaris ATV Lock & Ride
Product Instructions | Part No: 21552
Kolpin Outdoors, Inc. | 9955 59th Ave N | Plymouth, MN 55442
[phone] or [phone] | kolpin.com | customerservi[email protected]
1
Item Qty Part Description Spare P/N
12Overmolded Grip Arm - A -
22Overmolded Grip Arm - B -
32Thumb Screw -
42Locknut, M8 - 1.25 -
54Pivot -
62Mounting Base -
72Steel Washer -
82Nylon Spacer -
92Rubber Bushing -
10 2Threaded Post -
11 2Rubber Strap 21591
3
Before you begin, read these instructions and check to be sure all parts and tools are accounted for. Please retain these
instructions for future reference and part ordering information. Note: If any hardware is missing, do not return to the store.
Call us to help, toll free at 1-877-956-5746.
4
6
*Remove for 2017+ Sportsman
850/1000 Front Rack
5
7
8
9
10
11
2

2
© 2020 Kolpin Outdoors Inc. REV 00
Use and Care Information:
• Check the accessory mounts frequently and retighten if necessary.
• Replace this accessory with a new one if it is damaged or discolored excessively.
• When this accessory becomes dirty, rinse thoroughly with cool water to remove loose dirt, then wipe with a clean cloth or
sponge.
• Never use petroleum solvents such as gasoline, thinner, benzene, acid or alkaline cleaners.
• Its recommended to keep out of direct sunlight exposure during long periods of time.
For additional assistance, please contact Kolpin customer service department at [phone] or [phone]
or email [email protected]
One Year Limited Warranty
For the period of one (1) year from the purchase date, Kolpin will replace for the original purchaser, free of charge, any part or
parts found upon examination by Kolpin to be defective in material, workmanship, or both.
All transportation costs incurred submitting product to Kolpin for warranty consideration must be borne by the purchaser. If Kolpin
determines that the product must be returned to the factory for credit, please call 1-877-956-5746 for a Return Merchandise
Authorization (RMA) number and shipping instructions.
This warranty does not apply to parts that have been damaged by accident, alteration, abuse, improper maintenance, normal
wear, or other causes beyond the manufacturer’s control. In order to protect you and your ATV, certain parts of the accessory
system and/or hardware are designed to fail when the equipment is over-stressed. Parts that are lost due to loosening and
improper maintenance are not covered under warranty. This warranty does not cover removal or reinstallation labor fees of the
accessory system and related components.
Most hardware is general in nature and is easily obtained locally. Be sure to replace with minimum metric class 8.8 specification.
Mounting Instructions:
1. Attach the Lock & Ride components [Items 7 thru 10] into the threaded hole on the bottom of the Mounting Base [Item 6]. The
upper Grip Arms can be left assembled or removed during install.
Note: Remove the Nylon Spacer [Item 8] to mount onto the front rack of a 2017+ Polaris Sportsman 850/1000.
2. Adjust the tightness of the Rubber Bushing [Item 9] until it expands enough to make light contact with the Lock & Ride hole
on the vehicle but can still be pushed in far enough so the bottom of the Mounting Base [Item 6] makes contact with the vehi-
cle rack.
3. Place Rhino Grip into vehicle’s Lock & Ride hole and push down while turning the Mounting Base clockwise to tighten. The
Rubber Bushing [Item 9] will expand and draw the Mounting Base tight to the vehicle rack.
4. To remove from vehicle, turn the Mounting Base counter-clockwise until the Rhino Grip can be pulled out of the Lock & Ride
hole.
Grip Adjustment Instructions:
1. Remove the Thumb Screw [Item 3], Arms [Items 1 & 2], and Pivots [Item 5].
2. Re-assemble in desired position and tighten Thumb Screw securely.
PUSH DOWN & TURN CLOCKWISE
PLACE INTO LOCK & RIDE HOLE