KONNEK STEIN F23 User manual

Indoor Security Camera
F23
Quick Start Guide

Mounting bracketsScrew packageQuick Start Guide
Quick Start
Guide
Included in Package
1
01 EN
Camera Power adapter

3
02 EN
Front Back
1.Microphone
2.Lens
3.Indicator Light
4.Reset Button
7.Power Interface
5.TF Card Slot
6.Speaker
1
23
4
7
6
5
Camera Information
RESET

Product Installation
2
1.Use an appropriate drilling tool to drill a hole at the
installation location.
1 2
3 4
03 EN
2.Insert wall anchors before installing the screws.
3.Installthe mounting bracket, use the install screws to
screw the mounting bracket directly into your wall.
4.Then align the camera with the card slot and install it
on the wall.
Noted: Flexible installation supports ceiling install and lay flat.

Tips:
Please kindly note this device is only compatible with 2.4GHz WiFi. Connection
to 5GHz WiFi will show connection failure. Most of the 5GHz routers have 5GHz
and 2.4GHz modes. Please select 2.4GHz during the item installation.
Related Download
3
1.Scan QR Code to download the App linklemo.
2.Search “linklemo”in App Store or Google Play and download.
04 EN

②.Choose card machine.
①.Click Add Product“ ”button on the app homescreen.
Binding Description
1.Add Camera
APP Explanation
5
05 EN
Add device
Add devices
Intelligent home Message
No device
Mine
Smart Camera
(Wi-Fi)
PTZ Camera
(Wi-Fi)
Bullet Camera
(Wi-Fi)
Photo frame
(Wi-Fi)
Bracelet
(Wi-Fi)
Doorbell
(Wi-Fi)
Personal device

RESET
QR code binding
06 EN
④.Connect Wi-Fi.③.Reset the device.
Please press the button to reset the device，After
hearing a beep，confirm if the device status indicator
flashes at intervals, and click to start the network
configuration
Please place the QR code 0.3-0.6 ft directly in
front of the camera, there will be voice prom...
Set the network to which the device is connected：
（Only supports 2.4GHz Wi-Fi）
2.4 GHz 5 GHz
Reset device Device network configuration
WLAN please choose
please enter WLAN passwordWi-Fi password
Connecting device
Please make sure the phone cl...
⑤.Scan QR code. ⑥.Connect Network then name.
Network settings Connect the device
RESET
Start network distribution
Scan success

Intelligent home Message Mine
1.Add device
2.Device name
3.Cloud video storage
4.Message notification
5.Intelligent home
6.Message
7.Mine
Main Interface
07 EN
Personal device 1
6
7
3
4
5
2My devicesSmart Camera

Live Interface
9.Speaker
10.Playback
11.Guard home
12.Album
Guard home Album
6.Record video
7.Other
8.Message
5.Screenshot picture1.Settings
3.Full screen
2.Resolution
4.Volume
Volume Record video OtherScreenshot picture
08 EN
HD
Smart Camera
Real-time preview Real-time preview
HD
Smart Camera 1
2
4
5
6
7
98 10
3
12
11
100kb/s 100kb/s

1
4
5
6
2
3
Settings
camera
Not open
No messages are pushed during DND.
Do not disturb
Private mode
Name
Device Information
System settings
Screen flip
Video cloud storage
Delete device
Settings Interface
1.Do not disturb：Do not push messages during Do Not Disturb.
2.Private mode：Turn off the camera.
3.Delete the device: If you want to reconnect the device,
please delete the device.
4.Power frequency：Set the power frequency according to
different regions.
5.Defend home model：In the setting area and time period, when
a screen change is detected, a prompt message will be pushed.
6.Infrared night vision：Switch night vision mode.
System settings
60HZ
Wi-Fi Name
Asia/Shanghai
5
Status indicator light
Volume
Power frequency
Time zone
Network information
Network settings
Defend home model
Infrared night vision
Storage
Initalization
09 EN

FCC ID: 2ANJX-F23
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received,
including interference that may cause undesired operation.
More information please go to www.fcc.gov/oet/ea/fccid
to search.
WARNING: This product can expose you to chemicals
including Pb, which are known to the State of California
to cause cancer and birth defects or other reproductive
harm. For more information go to www.P65Warnings.ca.gov.
Other Information
4
10 EN
Customer Service Tel：[phone]
Customer Service Email:[email protected]
Any support you need, anything you feel like to share,
You are more than welcome to contact us.

RF Exposure Statement
To maintain compliance with FCC's RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 20Cm the radiator
your body. This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.