KONNEK STEIN QC21 User manual

Indoor Security Camera
QC21
Quick Start Guide

Camera Power adapter Mounting brackets
Positioning stickers Screw packageQuick Start Guide
Quick Start
Guide
Included in Package
1
01 EN

Product Installation
2
1.Put the positioning stickers on the mounting position of
the wall, and use a proper drilling tool to drill 2 holes at the
position located.
2.Insert wall anchors before installing the screws.
3.Installthe mounting bracket, use the install screws to screw
the mounting bracket directly into your wall.
4.Mount the Camera, Align the two screws on the base of Cam
with the small holes on the mounting bracket and push down into
the slots, securely locking it.
1 2
3 4
02 EN
Noted: Flexible installation support ceiling install and lay flat.

Please kindly note this device is only compatible with 2.4GHz WiFi. Connection
to 5GHz WiFi will show connection failure. Most of the 5GHz routers have 5GHz
and 2.4GHz modes. Please select 2.4GHz during item installation.
Related Download
3
1.Scan QR Code to download the app ENKLOV
2.Scan QR code to download User Manual (Full version)
03 EN

FCC ID: 2ANJX-QC21
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
(2) this device must accept any interference received,
including interference that may cause undesired operation.
More information please go to www.fcc.gov/oet/ea/fccid
to search.
WARNING: This product can expose you to chemicals
including Pb, which are known to the State of California
to cause cancer and birth defects or other reproductive
harm. For more information go to www.P65Warnings.ca.gov.
Other Information
4
04 EN
Customer Service Tel：[phone]
Customer Service Email:[email protected]
Any support you need, anything you feel like to share,
You are more than welcome to contact us.