Korg nanoSERIES User manual

1
KORG KONTROL Editor Owner’s manual
- Apple and Mac are trademarks of Apple Inc., registered in the US and other countries.
- Windows XP and Windows Vista are trademarks of Microsoft Corporation in the US and other countries.
- All product names and company names are the trademarks or registered trademarks of their respective owners.
- Specifications and appearance are subject to change without notice for improvement.
Table of Contents
Introduction........................................................................................... 2
What is the KORG KONTROL Editor? ............................................................................... 2
Operating requirements...................................................................................................... 2
Installation............................................................................................. 3
Installation for Windows users ........................................................................................... 3
Installation for Mac OS X users.......................................................................................... 3
Quick start ............................................................................................. 4
Starting the KORG KONTROL Editor................................................................................. 4
Editing scene data............................................................................................................... 4
What are scene data and scene sets?........................................................................................ 5
Writing scene data into your Korg nanoSERIES MIDI controller .................................... 5
KORG KONTROL Editor screens and functions ................................ 6
Device select screen ........................................................................................................... 6
Show only connected devices .....................................................................................................6
Main screen.......................................................................................................................... 6
Items in the screen and their function ......................................................................................... 7
Basic operation ........................................................................................................................... 8
Other operations ......................................................................................................................... 8
Preference settings .............................................................................................................9
MIDI ports ................................................................................................................................... 9
Other ........................................................................................................................................... 9
File management ................................................................................ 10
Menu .................................................................................................... 11
File ...................................................................................................................................... 11
Edit...................................................................................................................................... 11
Send.................................................................................................................................... 12
Help..................................................................................................................................... 12
Troubleshooting.................................................................................. 13
Software won’t start up..................................................................................................... 13
Can’t transfer data.............................................................................................................13

2
KORG KONTROL Editor Owner’s manual
Introduction
Thank you for purchasing a Korg nanoSERIES MIDI controller.
To help you get the most out of your new instrument, please read this manual carefully.
What is the KORG KONTROL Editor?
The KORG KONTROL Editor lets you edit the parameters in your Korg nanoSERIES MIDI controller, and
save the settings on your computer.
Caution
Do not disconnect your Korg nanoSERIES MIDI controller while the KORG KONTROL Editor is running.
Do not use your Korg nanoSERIES MIDI controller or the KORG KONTROL Editor while any data is
being transmitted.
Operating requirements
Mac OS X
Computer Apple Macintosh computer with Intel or Power PC processor that is equipped
with a USB port and meets the requirements for Mac OS X
Operating system Mac OS X 10.3.9, or Mac OS X 10.4.7 or later
Windows
Computer Computer equipped with a USB port (a USB chipset made by Intel is recom-
mended) that meets the requirements for Microsoft Windows XP/Vista
Operating system Microsoft Windows XP SP2 or later, or Microsoft Windows Vista SP1

3
KORG KONTROL Editor Owner’s manual
Installation
Installation for Windows users
Proceed as follows to install the software in Windows.
1Double-click “Startup_E.exe” to start the installation process.
2The KORG KONTROL Editor Installer screen will appear. Follow the on-screen directions to install the
software.
Installation for Mac OS X users
Proceed as follows to install the software in Mac OS X.
1Double-click “KORG KONTROL Editor.pkg” to start the installation process.
2Once the installer begins, follow the on-screen directions to complete the installation.

4
KORG KONTROL Editor Owner’s manual
Quick start
Starting the KORG KONTROL Editor
In order to use the KORG KONTROL Editor, you must download the Korg USB-MIDI driver from the
Korg website and install it as described in the accompanying documentation. (http://www.korg.com)
1Use a USB cable to connect your Korg nanoSERIES MIDI controller to your computer.
2In the “KORG”-“KORG KONTROL Editor” folder, select “KORG KONTROL Editor” to begin.
Mac OS X The “KORG” folder is located in the “Applications” folder.
Windows The “KORG” folder is located in the taskbar “Start”-“All Programs”
3The main screen for the connected controller will appear, and then scene data will automatically be
read from the Korg nanoSERIES MIDI controller.
If more than one Korg nanoSERIES MIDI controller is connected, a Korg MIDI controller selection
screen will appear. Select the device whose settings you want to edit.
Editing scene data
Here’s how to edit scene data in the main screen.
1) [SCENE] buttons will be displayed if the device has more than one scene. Click the scene that you want to edit.
2) In the screen, click the control that you want to edit.
3) The parameters of the selected control are shown in the parameter editing area. Here you can edit the
parameters.

5
KORG KONTROL Editor Owner’s manual
What are scene data and scene sets?
Parameters are assigned to the controls (sliders, knobs, X-Y pad, etc.) of a Korg nanoSERIES MIDI control-
ler. These parameter assignments are collectively called “scene data.”
Some Korg nanoSERIES MIDI controllers have more than one scene; a collection of these scenes is called a
“scene set.”
Writing scene data into your Korg nanoSERIES MIDI controller
In order for the parameters that you’ve edited in the KORG KONTROL Editor to be reflected in your Korg
nanoSERIES MIDI controller, you’ll need to write the edited scene data into the Korg nanoSERIES MIDI
controller. Here’s how:
From the “Send” menu, choose “Write Scene Data.” A confirmation dialog box will appear, then click the
[OK] button.
Do not use your Korg nanoSERIES MIDI controller or KORG KONTROL Editor while any data is
being transmitted.

6
KORG KONTROL Editor Owner’s manual
KORG KONTROL Editor screens and functions
This section provides a brief explanation of the KORG KONTROL Editor’s screens and their functions.
Device select screen
Here you can select the device (Korg nanoSERIES MIDI controller) that you want to edit.
When you select a device, information about that device will appear in the right side of the screen.
If this is the device whose parameter settings you want to edit, click the [OK] button.
Show only connected devices
The KORG KONTROL Editor allows you to edit the parameters of a device that is not connected. To do so,
un-check the “Show only connected devices” check box.
Select this check box if you want to see only the that are connected.
If the preference setting “Specify MIDI ports manually” is on, you won't be able to set the “Show only
connected devices” option.

7
KORG KONTROL Editor Owner’s manual
Main screen
The main screen is where you can edit your device’s scene data.
[SCENE] button [GLOBAL] button
Controls
[CONTROL] tab
[BROWSE] tab Parameter display switch
Parameter edit area
Device
Items in the screen and their function
Device
This area shows an image of the device that you selected in the device select screen.
[SCENE] button
Click the [SCENE] button of the scene that you want to edit.
This is not shown for the nanoKEY.
[GLOBAL] button
Click the [GLOBAL] button to access the global data edit screen.
In the global data edit screen you can save or load data.
This is not shown for the nanoKEY or nanoKONTROL.
Parameter display switch
This lets you switch the parameters that are shown over each control in the device image.
Controls
This area shows the parameters that you selected using the parameter display switch.
If you've selected a parameter that the control does not have, this will indicate “--”.
When you click this, the parameters of the control will appear in the parameter display area.

8
KORG KONTROL Editor Owner’s manual
Switching the [BROWSE] / [CONTROL] tabs
[BROWSE] tab
This shows the folder hierarchy of your computer’s hard disk.
From the folder and file tree, you can select a scene set file and load it.
[CONTROL] tab
This lists the controls.
When you click in the control list, the parameters of that control will appear in the parameter edit area.
Basic operation
Here’s the basic procedure for editing in the main screen.
1If your device has more than one scene, [SCENE] buttons are displayed. Select the scene that you want
to edit.
2Click a control in the device image or in the control list of the [CONTROL] tab.
3The parameters of the selected control are shown in the parameter edit area. Edit the parameters here.
For details on each parameter, refer to the owner's manual of your Korg nanoSERIES MIDI controller.
Other operations
Cut, Copy, Paste,Clear
You can edit the setting for the [SCENE] buttons and the controls in the [CONTROL] tab, by performing
“Cut,” “Copy,” “Paste,” and “Clear” operations from the “Edit” menu.
Drag and drop
You can exchange the setting for the [SCENE] buttons and the controls in the [CONTROL] tab, you can
exchange the settings by dragging and dropping. To copy the settings, drag and drop while holding down
the [Ctrl] key (Mac: [Option] key).
Undoing the most recent operation
By selecting the “Undo” command from the “Edit” menu you can undo the previous operation.
Redoing an undone operation
By selecting the “Redo” command from the “Edit” menu you can return to the state prior to executing the
“Undo” command.

9
KORG KONTROL Editor Owner’s manual
Preference settings
Choose “Preferences ...” from the menu to access the Preferences dialog box.
MIDI ports
Specify MIDI ports manually
Turn this on if you want to specify the MIDI ports manually instead of using automatic device detection.
If this setting is on, use the MIDI IN and MIDI OUT fields to specify the ports to which your Korg
nanoSERIES MIDI controller is connected.
MIDI IN
Specify the MIDI IN port to which your Korg nanoSERIES MIDI controller is connected.
MIDI OUT
Specify the MIDI OUT port to which your Korg nanoSERIES MIDI controller is connected.
Other
Load data automatically
If this setting is off, data will not be automatically loaded from your Korg nanoSERIES MIDI controller
when the main screen for the device is shown.
Warn when writing data
If this setting is off, a warning dialog box will not appear when writing data to your Korg nanoSERIES
MIDI controller.

10
KORG KONTROL Editor Owner’s manual
File management
The following data can be transferred between the KORG KONTROL Editor and your Korg nanoSERIES
MIDI controller.
Device Type Content Extension
nanoKEY Scene data All parameters that can be set on the nanoKEY,
such as velocity curve and MIDI channel nanokey_data
Scene data All parameters in one nanoPAD scene, such as
trigger pads and X-Y pad nanopad_data
nanoPAD Scene set Parameters for four scenes
(not including global parameters) nanopad_set
Global data The nanoPAD’s global parameters, such as
the global MIDI channel and velocity curve nanopad_glob
nanoKONTROL Scene data All parameters in one nanoKONTROL
scene, such as sliders and buttons nktrl_data
Scene set Parameters for four scenes nktrl_set