Koryo KDI 10 Operating instructions

ELECTRIC
D R Y I R O N
Ezee Press
QUICK HEATING & IRONING
1000W
KDI 10

Dear Customer,
Congratulations! Thank you for buying this KORYO appliance. Your new Electric Dry Iron
has been designed for your convenience. We are sure you will get many years of trouble free
service from this appliance.
Before commissioning this device please read this user manual carefully. Please retain
this user manual, warranty certicate, sales receipt and if possible carton with the
inner packaging.
2

3
IMPORTANT IRONING INSTRUCTIONS
1. Please, read this instruction manual carefully before use, and keep it.
2. The sole plate should not come in contact with metallic objects such as zippers,
hooks, metallic buttons, rivets, etc.
3. The iron should not be placed on a conventional iron stand, to avoid scratches on
non stick coating on the sole plate.
4. Before connecting the iron make sure that the mains voltage is 220/240 AC.
5. When not ironing, make sure that the iron is shut off.
6. Let the iron cool before storing it.
7. Never immerse the iron in water.
Material made of nylon, rayon, silk, wool, cotton, etc. should be sorted out. Start with the
fabric requiring the lowest temperatures then the ones needing progressively higher
temperatures,
So you should first start with nylon, then rayon, silk, wool and finally cotton.
The correct temperature is always ensured by a thermostat, indicated by the pilot lamp,
which shuts off itself when the desired temperature is reached.
CORRECT IRONING PROCEDURE
PARTS DESCRIPTION
Adjustable Temperature Control Knob
Non Stick Coated Sole Plate
Neon Lamp
Swivel Cord
Handle

WARRANTY
This product comes with a warranty of 12 months from the date of purchase as specified on the
warranty card. This is against all defective material or workmanship. In the event of a defect,
KORYO Authorized Service Centre undertakes to repair the set, free of charge, during the
warranty period.
In the event of a defect developing in the product, contact KORYO Authorized Service Centre
and provide information about the defect, the model number and serial number of the product.
THIS WARRANTY IS VOID IF
1. The completely filled warranty card is not presented to the authorised personnel at the time of
servicing of the product.
2. The product is not operated according to the instructions given in the user manual.
3. Defects are caused by improper or reckless use.
4. Modifications or alterations have been made to the product or if the product has been
tampered with, in any manner whatsoever.
5. Repairs to the product are carried out by anyone other than an authorised company
representative.
6. For defects other than faulty parts or workmanship such as damage due to lightning, abnormal
voltage, spillages, dust, accidental damage, etc.
7. The serial number is deleted or altered.
8. Used for any non–domestic purpose.
OTHER TERMS AND CONDITIONS
1. Repairs or replacement will be carried out either by a KORYO authorised customer care
centre or by a representative.
2. This product has to be brought to the nearest KORYO Authorized service center at customer
cost for carrying out service
3. All expenses incurred in collecting the unit(s) or part(s) thereof from the Customer Service
Centre, as well as any other expenses and incidentals will be borne by the customer.
4. Whilst the company will make every effort to carry out repairs at the earliest, it is made
expressly clear that the company is under no obligation to do so in a specified period of time.
5. The company or its authorised customer centre reserves the right to retain any part(s) or
component(s) replaced at its discretion, in the event of a defect being noticed in the equipment
during the warranty
4

*For Service request kindly Contact Customer Care Centre at : 080-26577722, 1800-425-7722
*Please mail in queries to [email protected]
WARRANTY CARD
5