Kramer SWM-1 User manual

KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
SWM-1
Loudspeaker
Wall Mount Device
P/N: 2900-300089 Rev 1

SWM-1 – Contents i
Contents
1Introduction 1
2Getting Started 2
3Overview 3
4Defining the SWM-1 Loudspeaker Wall Mount Device 4
4.1 Wall Mount Parts 4
4.2 The Loudspeaker Interface Kit 5
4.3 The Wall Fixing Kit 5
5Installing the SWM-1 6
5.1 Preparing for Installation 6
5.2 Attach the Ball Interface to the Loudspeaker Rear Panel 6
5.3 Attaching the Ball Clamps 8
5.4 Wall Mounting the SWM-1 9
5.5 Mounting the Loudspeaker on the Wall 10
6Technical Specifications 11
Figures
UFigure 1: SWM-1 Parts per UnitU4
UFigure 2: Attaching the Ball ClampsU8
UFigure 3: SWM-1 Assembled KitU8
UFigure 4: Mounting the Wall Plate on a Concrete WallU9
UFigure 5: Mounting the Wall Plate on a Wooden WallU9
UFigure 6: Mounting the LoudspeakerU10
UFigure 7: Setting the Loudspeaker PositionU10

SWM-1 - Introduction 1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix
Switchers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters;
GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors;
GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and
GROUP 11: Sierra Products.
Congratulations on purchasing your Kramer SWM-1 Loudspeaker Wall Mount
Device, which is ideal for mounting on-wall loudspeakers.

2 SWM-1 - Getting Started
2 Getting Started
We recommend that you:
•Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
•Review the contents of this user manual
Go to http://www.kramerelectronics.com to check for up-to-date user
manuals, application programs, and to check if firmware upgrades
are available (where appropriate).
The package includes:
•An SWM-1 Loudspeaker Wall Mount Device, that consists of a pair of
on-wall mounts (the contents are described in detail in Section 4
•This User Manual
)
Use this wall mount only with the maximum allowed weight load (up
to 5kg (11lbs)) per wall mount. Using it for a heavier weight than
the indicated maximum may cause injury.
Some walls are not suitable for installation. Be sure that the wall
type is appropriate for installing the wall mount, that is, either solid
wood, bricks, concrete, or wood studs. If you install this product on
drywall it must be securely fixed to a wooden stud, concrete block
or other permanent structure behind the drywall board.
When drilling holes in walls it is essential to avoid contact with
electrical cables and water or gas pipes contained within.
After installing the wall mount, double-check that the fixings are
safe and secure. It is recommended to check that the wall mount is
safely secured from time to time.
i
!

SWM-1 - Overview 3
3 Overview
The Kramer SWM-1 is a versatile device for wall-mounting loudspeakers.
The SWM-1:
•Is designed for cabinet loudspeakers weighing up to 5kg (11lbs)
•Mounts the loudspeaker 72mm (2.8”) from the wall
•Is suitable for single point, dual point and keyhole fixings
•Distance between dual point fixings is 51mm – 67mm (2” – 2.6”)
•Is suitable for loudspeakers using M5, M6, UNC ¼” and wood screws
•Kit includes all the mounting hardware for easy installation

4 SWM-1 - Defining the SWM-1 Loudspeaker Wall Mount Device
4 Defining the SWM-1 Loudspeaker Wall
Mount Device
Each SWM-1 package includes a pair of loudspeaker wall mounts. The following
sections define the parts of one (of two) wall mount kit.
4.1 Wall Mount Parts
You need to disassemble the SWM-1 before installing it.
Figure 1: SWM-1 Parts per Unit
#
Part per Unit
#
Part per Unit
1 M6x45 Hex Screw 6 Wall Plate
2 M6 Thumbwheel 7 Lower Ball Clamp
3 M6 Metal Washer 8 M6x12mm Screw
4 M3x8 Screw 9 Ball Interface
5 Top Ball Clamp 10 Adapter Interface
i

SWM-1 - Defining the SWM-1 Loudspeaker Wall Mount Device 5
4.2 The Loudspeaker Interface Kit
The loudspeaker interface screws are used to attach the wall mount to the
loudspeaker. Use the screws in the kit that fit the hole threading on the
loudspeakers.
#
Part per Unit
A M5x12mm Screw (2)
B M6x12mm Screw (2)
C UNC 1/4”x5/8” Screw (2)
D M4.2x19mm (No.8x3/4”) Wood Screw (2)
E Keyhole insert (1)
4.3 The Wall Fixing Kit
Use the wall fixing screws and wall plugs to fix the wall mount with the
loudspeaker to the wall.
#
Parts per Unit
A1 M4.8x32mm Wood Screw (2)
A2 No6 Wall Plug, for part A1 (2)

6 SWM-1 - Installing the SWM-1
5 Installing the SWM-1
This section describes how to install the SWM-1.
The following instructions refer to the installation of one unit.
5.1 Preparing for Installation
Before installing the loudspeakers, check that you have all the required tools:
•Crosshead/Flathead screwdriver
•Power drill
•6mm (1/4") masonry bit or 3mm (1/8") wood bit
•Pencil
•Level and stud finder (optional)
5.2 Attach the Ball Interface to the Loudspeaker Rear Panel
This section describes several methods in which you can attach the SWM-1 Ball
Interface to the rear side of the loudspeaker. Choose the method that fits best to
your loudspeaker:
One Insert:
Connect the ball interface to the
single hole on the loudspeaker rear
panel using screw types A, B or C
(see Section 4.2
).
i

SWM-1 - Installing the SWM-1 7
Dual Insert:
Connect the ball interface to the
adapter interface using an
M6x12mm screw, and then connect
them to the two holes on the
loudspeaker rear panel, using screw
types A, B or C (see Section 4.2
).
Keyhole Insert:
Insert the M5x12mm screw through
the hole in the ball interface and
tighten with the keyhole insert. Insert
the screw head into the keyhole and
push it upwards.
No Inserts Available:
Connect the ball interface to the
adapter interface using an
M6x12mm screw, and then use the
two M4.2x19mm wood screws (see
Section 4.2 ) to connect them to the
loudspeaker rear panel.

8 SWM-1 - Installing the SWM-1
5.3 Attaching the Ball Clamps
Attach the top and lower ball clamps to the ball interface as illustrated in Figure 2:
Figure 2: Attaching the Ball Clamps
Figure 3 shows the assembled kit:
Figure 3: SWM-1 Assembled Kit