Kraun KR.1H User manual

www.kraun.it
USER MANUAL
Cod. KR.1H
Box HD
Media Player 1080P

2
Brief introduction
Feature
The product is a new kind of multimedia player product. The product can
provide good watching. Meanwhile, it can also store and play many kinds of
video files. The product, which is facilitated with many ports, can show you
pictures and videos with high definition. It is really your desirable
entertainment product.
Basic performance
Video- AVI, MPG,TS/M2TS/TP/TRP,ISO,IFO,VOB,DAT,MP4,MOV,
WMV,MKV,RM/RMVB,FLV
Audio- MP3, WMA,WAV,AAC,FLAC,OGG,Dolby DigItal,DTS Digital
Image-JPG/BMP/GIF/PNG
USB HOST- Connect USB mass storage device
USB2.0-High speed USB2.0 port
HDMI-HDMI high definition port
Network - Ethernet port (RJ45, 10/100 Mbit/s), WLAN ( IEEE 802.11 b/g/n )
1080P output -Full HD 1080P (1920x1080) decoder output.
2 www.kraun.it
User Manual
WLAN optional (IEEE 802.11 b/g/n)

3
Product details
Packing list
Check the accessories after receiving the product. If there are some missing,
please contact immediately with your supplier to insure your consumer’s
right.
No. Name Quantity
1 Media player 1 pcs
2 Power Adapter 1 pcs
3 Remote Controller 1 pcs
4 AV cable 1 pcs
5 USB cable 1 pcs
6 User Manual 1 pcs
7 Batteries 2 pcs
8 Screws several
Front view
User Manual
www.kraun.it 3

4
Button definition
Button button definition instruction
①Power button Press shortly to switch
on/off the power
OK Enter button Press shortly to confirm the
current operation
Left button Press shortly to move cursor
left
Right button Press shortly to move cursor
right
Up button Press shortly to move
cursor up
②
Down button Press shortly to move cursor
down
③SETUP Setup button Press shortly to enter the
setup menu
④MENU Menu button Press shortly to return the
first menu
⑤STOP Stop button Press shortly to stop current
operation
LED definition
LED LED definition Instruction
Power Power LED Blue light when switch on, red light when
stand-by.
4 www.kraun.it
User Manual

5
Back View
Port definition
Port Port definition Instruction
①DC IN Power port Can input power
②YPbPr Component
video output port
Can output progressive
scan component video
③AV Composite
video output port
Can output composite video
and audio
④OPTICAL Audio output
port
Can output digital audio
signal
⑤HDMI High definition
port
Can output digital signal via
HDMI port
⑥LAN Network port Can connect to network via
internet port
⑦USB USB port Via this USB port for PC
communication
⑧ USB HOST Outside USB
port
Can read outside USB
storage via USB port
User Manual
www.kraun.it 5

6
Remote control
BUTTON FUNCTION
POWER Turn on and off in the stand by mode
MUTE Turn on or shut audio output
TV SYSTEM
Press to switch between NTSC, PAL, 480P, 576P,
720P 50HZ, 720P 60HZ, 1080I 50HZ and 1080I 60HZ,
1080P 50HZ,1080P 60HZ.
0-9 Press to input digital
GOTO Press to play the video at the chapter after setting
schedule
GUIDE Switches to the main menu.
FR Press to fast rewind from current play and again to
select the speed
FF Press to fast forward from current play and again to
select the speed
RETURN Return to the previous menu
SETUP Opens the settings menu
Press shortly to move cursor left
Press shortly to move cursor right
Press shortly to move cursor up
Press shortly to move cursor down
OK Press this button to confirm a selection and start the
playback of a media file.
PREV Press to return to previous file
NEXT Press to go to next file
VOL- Press to decrease the volume
VOL+ Press to increase the volume
OPTION Opens the options menu in the browser to rename or
delete the file
STOP Ends the playback of a media file
PAUSE/STEP Pauses the playback or playback by step
6 www.kraun.it
User Manual

7
REPEAT Press to set repeat option: chapter, Title or off
COPY Enter the copy mode
SELECT Select copy files or folders in the copy mode
CONFIRM No role for the time being
INFO Press to display time, title, information of chapter when
play video and photo
SUBTITLE Switch the subtitle if the file supported
SLOW Press to have slow motion:（1X, 3/4X，1/2X，1/4X，1/8X，
1/16X.Press OK to resume regular play mode.
AUDIO Switch the audio format output
ZOOM
Press to zoom when playing back photos or Video
programs
Photo zoom levels: 2X,4X,8X,16X
Video zoom levels: 1X,2X,3X,4X,8X
ALL Show all the folders and files of the current directory.
MUSIC Show the audio files of the current directory.
PHOTO Show the photos of the current directory.
MOVIES Show the video files of the current directory.
Basic operation
Usage preparing
1，Power connection
Take out power adapter from the package and connect it.
2，Connection of TV audio and video output
The product is designed with multi-output, including composite(AV),
component(YPbPr) and HDMI. Individuals can select different interface
according various need. The product can detect video output automatically,
making the operation friendly and convenient. Please refer to the following
instruction for connection to avoid any problem.
User Manual
www.kraun.it 7

8
Composite output connection(AV)
Plug the yellow connector into the AV output of product and AV input of TV,
and plug the red and white connector into the audio input of TV or HIFI. Turn
on the TV and select AV mode. Turn on the product and TV displays the
interface of initiation.
Component output connection (YPbPr)
Component output mode: Plug the YPbPr cable into the output of product
and input of TV. Because the cable is only for video signal, another AV cable
is necessary. Plug the red and white connector of AV cable into the audio
output of product and audio input of TV or HIFI. Turn on TV and select YPbPr
mode. Turn on the product and TV displays the interface of initiation.
8 www.kraun.it
User Manual

9
HDMI output mode
HDMI is a output with best audio and video effect which outputs digital video
and audio composited at the same time. Connect HDMI cable to output of
product and display device with HDMI input. Select HDMI mode in TV until it
displays the interface of initiation.
Optical output mode
Optical output：Connect the product optical connector with the other one from
video or audio device by optical cable. Then enter the product's audio
interface, select the Digital Output option "SPDIF LPCM" or "SPDIF RAW".
It is available to enjoy 5.1 high quality sounds through a multi channel
decoder/amplifier with optical input.
3,Connection and setup of network
The product can play the files stored in the PC directly through network.
Please connect the RJ45 cable according to the following illustration. The
network connects well when the LED of network status blinks.
User Manual
www.kraun.it 9

10
Connect the video output. Press “setup” key or select “setup” menu in the
initiation interface. Select “Network” option in the setup window and press
“OK” to confirm. It is available for both automatic and manual IP setup. Press
“setup” key again to exist after setup. Please see " Wired Lan Setup" for
more details.Before access the PC through network by the product, the
media files must be shared in the network.
Following is the setup of media file sharing in PC
Operation of file sharing
Operation of file sharing under Windows
Two conditions are necessary for a successful play of network connection.
1. Folder sharing and safety setup
2. Set the same gateway and subnet mark address.
Procedure of file sharing under Windows XP
1. Select the folder need to be shared, right click mouse and select the
10 www.kraun.it
User Manual

11
option” Sharing and safety”, lift click the mouse.
2. Select “sharing” in the property option and select “share this folder on the
network” and click “Apply” for confirming to exist.
3. Open” Control panel- Management tool-Computer management-Local
users and groups” and click “Users” option. Right click Guest and select
“Properties”.
4. Select 'users can not change your password' and 'password never
expires'. keep the other checkboxes unchecked.
5. Open” Control panel- Network connection”, and select “Local Area
connection” and right click to select “Properties”.
6. In the Pop-up window, select ‘Internet protocol (TCP/IP)’
7. Set up the relevant IP address, subnet mask and gateway, can also
choose to automatically design.
8. Completion of Windows XP network sharing.
9. Finally, please close the Windows Network Connection Firewall
Operation of file sharing under Windows Vista
1．Please make sure that the Vista operation system is installed as
Administrator supper user.
2．From the desktop select ”start- setup-control panel-select user account”
3．Open User account and select” open a new account” and name it “Guest”
4．Select the folder need to share and right click the mouse, then select the
“sharing” option.
5．Open the shared folder and add guest account to the list
6．Give the right to all the users after adding the Guest into the list.
7．Select “sharing”, and then the folder is shared.
8．Finish sharing
9. Operate the device as the same as operate in XP system
The use of USB HOST interface
Player with ability to expand large-capacity.The USB HOST port can read
external mobile hard disk, U disk, digital cameras, card readers and other
User Manual
www.kraun.it 11

12
data storage devices.
Even without the installation of hard drive players, you can connect external
storage devices through the USB HOST interface. To direct play a variety of
high-definition formats high-fidelity audio and video files stored in external
storage devices. To watch HD movies and digital photos are more palatable,
at the same time the output digital audio signals to audio equipment can feel
the shock of high-fidelity sound effects.
The USB interface connect to the PC
This HDD Player is also a personal multimedia files storage device and can
be used by connecting to the PC.
1, Connect to the power supply
While using the HDD player with PC, power supply is also needed.
2, Connect to PC with USB cable
Connect the HDD Player to PC with USB cable then you can copy and
transfer data.
Follow the instruction of the above picture and connect the device to PC.
Power on the PC and enter the system.The PC detects the device
automatically and then the device can be used as an external USB storage
device. After data transfer finished, please remove the USB storage device
12 www.kraun.it
User Manual

13
safely (click the USB device icon to stop the USB device and then pull out the
USB cable).
Notes:
1．Please don’t power off when it connect to PC for reading and writing.
2．If there is no USB detected after connected with USB cable, maybe the
PC is operating other program, please pull off the USB cable and wait
about 10 seconds then connect again.
This HDD Player is also a personal multimedia files storage device and can
be used by connecting to the PC. Individuals can browse and copy files
easily.
Operation of product usage
Note: While connect the power supply for the first time, the device will power
on automatically and appear the below menu:
Please read the following instructions carefully to understand the function of
each option.
Main menu: Browse and play the media files.
Pressing the “Up” and “Down” navigation buttons to choose the source
devices on the main menu. Press movie, photo, music or all button on the
remote control to browser movie, photo, music files stored on a HDD, USB
device, NET . and press OK button to play.
File copy: Copy files from one device to another
Pressing COPY buttons on to enter the copy mode. With this function,
individual can copy files from Hard Disk, NET, USB from a device to another.
Setup: Enter the setup menu
To enter the setup menu, select SETUP on the remote control or select Setup
User Manual
www.kraun.it 13

14
button on the main menu page With this function, individuals can configure
System, movie, music, photo, network settings.
Main Menu
The main menu allows you browse and play music, photo and movie files
stored on a HDD or an external USB device , Network .
Press “ ” and “ ” to select the device on which the media is stored.
Choose from HDD, USB (for media stored on an external flash disk), NET
and press OK button to confirm and play the files in the selected device.
File Range function
To make file browsing and playing easier, there is a function to range all files
into different folders named “All”, “Music”, “Photo” and “Movie”, individuals
can switch to any folder by pressing “All”, “Music”, “Photo” and “Movies” four
buttons on the remote control.
Browsing Music
Press the MUSIC button on the remote control to enter the music play mode.
Press “ ” and “ ”to select the folder containing your audio files. A
thumbnail strip appears at the bottom of the screen, along with song
information. Press “ ” and “ ” to select the file you want to play
and press OK. This browsing music function supports MP3,
WMA,WAV,AAC,FLAC,OGG,Dolby Digital …format Playback.
Browsing Photos
Press the PHOTO button on the remote control to enter the photo play mode.
Press “ ” and “ ” to select the folder containing your photo files. Enter the
folder press “ ” and “ ” to select the photo you want to view and press OK
the photo is displayed full screen. Depending on the type and size of the
picture, you may have to wait some time before the playback starts.
While browsing a photo, you can press “ ” and “ ” to rotate a photo in any
14 www.kraun.it
User Manual

15
angle. Beside rotating a photo, you can press ZOOM to zoom in/out that
photo, four zoom levels(2X,4X.8X16X) are available.This browsing photos
function supports High Definition Photo (JPG,BMP,PNG,GIF) Playback.
If the SLIDESHOW is enabled in the Setup (“Photo Setup” menu) ,then
press Setup button to return to the pictures you want to playback, the
slideshow will start automatically.
If you want to playback some music during the slideshow, simply make
sure that you copy your music file(s) in the same directory as the pictures.
Then choose the “Folder” option in Background Music (“Photo
Setup ”menu). Press the OK button to playback your slideshow with the
music background.
Note:
1. While listening to audio files, you can browse the photos at the same
time.
2. If you press ZOOM during playback slideshow ,the slideshow will
automatically stop.
Browsing Movies
Press the MOVIES button on the remote control to enter the movie play
mode.
Press “ ” and “ ” to select the folder(s) containing your movie files. Enter
the folder press “ ” and “ ” to select the movie you want to view and press
OK. The movie is played full screen.
This browsing movies function supports High Definition
Video(720P,1080i,1080P) Playback.
For example:
1. MPEG1(DAT,MPG)
2. MPEG2(ISO,IFO,VOB, MPG, TS/M2TS/TP)
3. MPEG4(AVI,DIVX,XVID,MKV,)
4. H.264(AVI,MKV,MOV,MP4)
User Manual
www.kraun.it 15

16
5. RM/RMVB,FLV,ISO
Note:When play the HD Video, you can according the movie resolution to
adjust HD Video output. See “Creating HD Resolution of SETUP menu” for
more details.
Subtitle
The product supports subtitle documents in formats of SSA, SMI, SRT, SUB
and so on. When the video being played supports the corresponding subtitle
format, the subtitle can be switched, displayed, or hidden through pressing
the SUBTITLE controlling key. Meanwhile, the size and position of the
subtitle can also be adjusted through direction keys. When the movie is
played with the subtitle showed on the screen, you can press “ ” and “ ” to
change the subtitle’s position in the screen, and press “ ” and “ ” to
change the size of the subtitle, with “ ” to enlarge and “ ” to reduce.
Browsing All
Press ALL button on the remote control to enter browsing all file.
Press “ ” and “ ”to select the folder(s) containing your all files(Beside
Music ,Photo and Movie). Enter the folder press “ ” and “ ”to select the
file you want to view and press OK to play.
NETWORK
When the product is connected to Network(referring to network settings), you
can choose the menu of NETWORK to access the shared files, there are two
options to choose: My Shortcut and My Neighbors.
My Shortcut
When you are browsing NET, you can choose the PC name from the menu or
you can set “Specific File Server IP” and access it from “My Shortcut” in the
menu. And then you can browse the shared files on the network .
My Neighbors
When you are browsing NET, you can choose the PC name from the menu or
16 www.kraun.it
User Manual

17
you can select “My Neighbors” to access .And then you can browse the
shared files on the network .Details refer to the Network in Setup menu.
UPNP
The full name of UPNP is Universal Plug and Play.
UPNP criterion is based on TCP/IP protocol as well as new internet protocols
aim at communication between facilities. In fact, UPNP is made in the hope
that all the facilities connected to the internet can communicate without being
interrupted by gateway in the future, so that our communication in the internet
can become more fluently, documents transmission can become more
convenient by using software that supports UPNP, and internet applications
which cannot be used before can be operated in the future. These are all the
convenience brought by UPNP.
This product is a multimedia player that supports UPNP. Before using UPNP
function, please make sure that computer connected with the product in LAN
has installed software that support UPNP. If not, please install a multimedia
play software or share software that support UPNP gateway protocol, and
then open the UPNP share function in the software, so that the access speed
can be quickened largely.
For example, connect the player to the family LAN, and then multimedia
documents shared in the Media Player 11 software in the computer in study
can be accessed in the living room through UPNP.
Firstly, connect the player to the family LAN. You can refer to network
connection instructions to connect the player.
Secondly, install software that support UPNP gateway protocol.
Before using UPNP function, you need to install software that support UPNP
gateway protocol in your computer and then start the share function. Such as
install a Media Player 11 software that support UPNP function (remark:
former edition of Media Player 11 doesn’t support UPNP function) in your
computer.
Thirdly, share documents through setting the software.
User Manual
www.kraun.it 17

18
After installing the software, open the software’s interface, choose “Media
Base” in the main interface of the software, and then choose “add to the
media base” in the pull-down menu. After adding some documents or folders
to the media base, choose “media share” in the pull-down menu. You can
also set the types and positions for the shared documents, such as “music,
picture or video” and so on.
Fourthly, use the player’s UPNP function.
When the setting of the shared documents is finished, choose UPNP option
in the main interface of the player to enter, and then the player can search out
computers installed with UPNP software in LAN. Enter your computer, and
you can see multimedia documents shared through Media Player 11 in your
computer. Using UPNP is more convenient and faster than using the player’s
network function. The player can access to computers without being
interrupted by gateway, avoiding fussy operations like inputting user name,
password and so on. Meanwhile, the function of UPNP is stronger, for
example, through setting the options of Media Player 11, multimedia
documents can be chosen and classified according to different ways, thus the
information can be shown in a more detailed way, helping you to find what
you want among plenty of documents, bringing convenience. All the above
are advantages of UPNP.
File Edit Menu
Press “ ” and “ ”to select the file or folder, press OPTION to display the
Edit tab.
Return Select to return to the main screen.
Rename
To rename a file, do as the followings:
1. Press “ ” and “ ” on the remote control to select the
Rename tab from the menu bar.
2. Press OK on the remote control. The name entry screen
appears.
3. Use the navigation arrows to select letters and numbers.
Select CAPS to toggle between uppercase and lowercase
18 www.kraun.it
User Manual

19
letters. Press <- to delete a letter. Press -> to insert a
space. Press OK to input each letter or number.
4. Once you have entered the new name, select OK and
press OK to confirm all changes.
If you want to cancel the naming during the process, press
RETURN.
Delete
To delete a title, do the following:
1. Press “ ” and “ ” on the remote control to select the
Delete tab from the menu bar.
2. Press OK to confirm and delete the file.
3. A confirmation message appears. Press “ ” or“ ”and
select OK.
4. Press OK to delete the selected file. To cancel delete,
select Return.
File Copy Menu
The File Copy allows individuals to copy files between USB, HDD, NET.
Select “File Copy” from the Guide menu or select “COPY” on the remote
control .It is very easy to copy files between various devices.
Copying operation
Step 1: Select Source Device
Press “ ” and “ ”to select the device which need to copy at first after
entering the File copy interface,. Then press “ ”to select Destination Device,
press “ ” to return.
Step 2: Select Destination Device
Press “ ” and “ ” to select the device of the Destination after go to
Destination sector. Then press “ ”o next step, and press “ ” to return.
Step 3: Select copy files or folders
At Source sector, press “ ” and “ ”to select and press “SELECT” to select
User Manual
www.kraun.it 19

20
file or folders which need to copy. “√”.appears at right side of selected file or
folder.Then press “ ”o next step, and press “ ” to return. Can only choose a
maximum of eight file or folder
Step 4: Select the folders of Destination
Press “ ” and “ ” to select a target folder at the destination sector. Then
press “ ”to next step, and press “ ” to return.
Step 5: Copy Status
At top menu, select OK to copy, select No to cancel.
After copy finishing, the system will display “File Copy is completed!”, or will
display “File Copy failed!”
Select “OK” to browse the copied files, or select “No” to return to the previous
menu.
Setup Menu
Select” Setup” option or directly press “Setup” button on the remote controller
to enter the setup menu. It is possible to configure Photo, Audio, Video,
Network and System.
Select any option by pressing “ ” and “ ”on the remote controller, and press
OK to confirm or press “Return” to exit. Press “Setup” button again on
remote control to exit from setup menu.
Changing System Settings
Menu Language select to choose the OSD (On Screen Display)
language
Text Encoding Change the system language.
Screen Saver ON/OFF
System Update View the current software version and update the
software of the product
Restore Default To reset the language, time and network.
20 www.kraun.it
User Manual