KTC HS-SK321 Mounting instructions

RD-43WR

Contents
Safety and warning information…........2
Installing your new appliance………....8
Description of the appliance….......….12
…………………...…..13
Using your appliance……………........14
Helpful hints and tips……………… 17
Cleaning and care……………………18
Troubleshooting……………………… 
Disposal of the appliance……………21
2
For your safety and correct usage before installing and first
using the appliance, read this user manual carefully, including
its hints and warnings. To avoid unnecessary mistakes and
accidents, it is important to make sure that all people using the
appliance are thoroughly familiar with its
operation and safety features. Save these instructions and be
sure that they remain with the appliance if it is moved or sold,
so that anyone using it throughout its life, will be properly
informed on its usage and safety notices.
For the safety of life and property, keep the precautions of
these user's instructions as the manufacturer is not
,
responsible for damages caused by omission.
Safety for children and otherswho are vulnerable people
According to EN standard
According to IEC standard
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
Control panel 19

3
Keep all packaging away from children as there is risk of
suffocation.
If you are discarding the appliance, pull the plug out of the
socket, cut the connection cable (as close to the appliance
as you can) and remove the door to prevent children playing
from suffering an electric shock or from closing themselves
inside it.
If this appliance, featuring a magnetic door seals, is to
replace an older appliance having a spring lock (latch) on the
door or lid, be sure to make the spring lock unusable before
you discard the old appliance. This will prevent it from
becoming a death trap for a child.
General safety
WARNING —This appliance is intended to be used in
household and similar applications such as
-staff kitchen areas in shops, offices and other working
environments;
-farm houses and by clients in hotels, motels and other
residential type environments;
-bed and breakfast type environments;
-catering and similar non-retail applications.
WARNING — Do not store explosive substances such as
aerosol cans with a flammable propellant in this appliance.
WARNING — If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
WARNING — Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
WARNING — Do not use mechanical devices or other
means to accelerate the defrosting process, other than those
recommended by the manufacturer.
WARNING — Do not damage the refrigerant circuit.
WARNING — Do not use electrical appliances inside the
food storage compartments of the appliance, unless they are
of the type recommended by the manufacturer.

4
WARNING — The refrigerant and insulation blowing gas are
flammable. When disposing of the appliance, do so only at
an authorized waste disposal centre. Do not expose to
flame.
WARNING —When positioning the appliance, ensure the
supply cord is not trapped or damaged.
WARNING —Do not locate multiple portable socket-outlets
or portable power supplies at the rear of the appliance.
Refrigerant
The refrigerant isobutene (R600a) is contained within the
refrigerant circuit of the appliance, a natural gas with a high
level of environmental compatibility, which is nevertheless
flammable. During transportation and installation of the
appliance, ensure that none of the components of the
refrigerant circuit becomes damaged.
The refrigerant (R600a) is flammable.
WARNING:
If the refrigerant circuit should be damaged:
-Avoid opening flames and sources of ignition.
-Thoroughly ventilate the room in which the appliance is
situated.
WARNING — Refrigerators contain refrigerant andgases in
the insulation. Refrigerant and gases must be disposed of
professionally as they may cause eye injuries or ignition.
Ensure that tubing of the refrigerant circuit is not damage
prior to proper disposal.
Replacing the illuminating lamps
WARNING—The illuminating lamps must not be replaced by
the user! If the illuminating lamps is damaged, contact the
customer helpline for assistance.
This warning is only for refrigerators that contain illuminating
lamps.
Risk of fire / flammable materials

alternating current of 115V/60Hz. If fluctuation of voltage
5
Daily use
Do not store flammable gass or liquids in the appliance,
There is a risk of an explosion.
Do not operate any electrical appliances in the appliance
(e.g.electric ice cream makers,mixers etc.).
When unplugging always pull the plug from the mains
socket,do not pull on the cable.
Do not place hot items near the plastic components of this
appliance.
Electrical safety
1.The power cord must not be lengthened.
2. Make sure that the power plug is not crushed or damaged.
A crushed or damaged power plug may overheat and cause a
fire.
3. Make sure that you can access the main plug of the
appliance.
4. Do not pull the main cable.
5. If the power plug socket is loose, do not insert the power
plug. There is a risk of electric shock or fire.
6.You must not operate the appliance without the interior
lighting lamp cover.
7.The fridge is only applied with power supply of single phase
in the district of user is so large that the voltage exceeds the
above scope, for safety sake, be sure to apply A.C. Automatic
voltage regulator of more than 350W to the fridge. The fridge
must employ a special power socket instead of common one
with other electric appliances. Its plug must match the socket
with ground wire.
It is dangerous to alter the specifications or modify this
product in any way.
Any damage to the cord may cause a shortcircuit, fire, and/or
electric shock.

6
Do not place food products directly against the air outlet on
the rear wall.
Store pre-packed frozen food in accordance with the frozen
food manufacture’s instructions.
The appliances manufactures storage recommendations
should be strictly adhered to.Refer to relrelevant instructions
for storage.
Do not place carbonated or fizzy drinks in the freeze
compartment as it creates pressure on the container,which
may cause it to explode,resulting in damage to the
appliance.
Frozen food can cause frost burns if consumed straight from
the freezer compartment.
Do not place the appliance in direct sunlight.
Keep buring candles,lamps and other items with naked
flames away from the appliance so that do not set the
appliance on fire.
The appliance is intended for keeping food stuff and/or
beverages in normal household as explained in this
instruction booklet The appliance is heavy.Care should be
taken when moving it.
Do not remove nor touch items from the freezer
compartment if your hands are damp/wet,as this could cause
skin abrasions or frost/freezer burns.
Never use the base,drawers, doors etc. to stand on or as
supports.
Frozen food must not be refrozen once it has been thawed
out.
Do not consume ice popsicles or ice cubes straight from
the freezer as this can cause freezer burn to the mouth
and lips.
To avoid items falling and causing injury or damage to
the appliance, do not overload the door racks or put too
much food in the crisper drawers.
caution!
Care and cleaning

7
Adequate air circulation should be around the appliance,
lacking this leads to overheating. To achieve sufficient
ventilation, follow the instructions relevant to installation.
Wherever possible the back of the product should not be too
close to a wall to avoid touching or catching warm parts
(compressor, condenser) to prevent the risk of a fire, follow
the instructions relevant to installation.
The appliance must not be locate close to radiators or
cookers.
Make sure that the mains plug is accessible after the
installation of the appliance.
Service
Any electrical work required to do the servicing of the
appliance should be carried out by qualified electrician or
competent person.
This product must be serviced by an authorized Service
Center, and only genuine spare parts must be used.
1)If the appliance is Frost Free.
2)If the appliance contains freezer compartment.
Installation Important!
For electrical connection carefully, follow the instructions
given in this manual.
Unpack the appliance and check if there are damages on it.
Do not connect the appliance if it is damaged. Report
possible damages immediately to the place you bought it. In
this case retain packing.
It is advisable to wait at least four hours before connecting
the appliance to allow the oil to flow back in the compressor.
Before maintenance, switch off the appliance and disconnect
the mains plug from the mains socket.
Do not clean the appliance with metal objects, steam
cleaner, ethereal oils, organic solvents or abrasive cleansers.
Do not use sharp objects to remove frost from the appliance.
Use a plastic scraper.
Note: Children aged from 3 to 8 years are allowed to load and
unload refrigerating appliances.(This clause applies only to the
EU region.)

InstallingyournewapplianceVentilationofapplianceBefore using the appliance for the first
time, you should be informed of the
of the cooling system and save
energy, it is necessary to maintain
good ventilation around the appliance
for the dissipation of heat. For this
reason, sufficient clear space should
Suggest :It is advisable for there to be
at least 75mm of space from the back
top,at last 100mm from its side to the
wall and a clear space in front to allow
the doors to open 135°. As shown in
8
100
100
A
B
Note:
This appliance performs well within
the climate class from N to T showed in
ƽ
75
100
0
01
C

SN
N
ST
T
It may not work properly if being left at
a temperature above or below the
Stand your appliance in a dry place to
For sufficient leveling and air
circulating in the lower rear section of
the appliance, the bottom feet may
need to be adjusted. You can adjust
them manually by hand or by using a
To allow the doors to self-close, tilt
Keep the appliance out of direct
sunlight rain or frost. Stand the
appliance away from heat sources
ƽƽƽƽThe side at which the door opens can
be changed, from the right side (as
supplied) to the left side, if the
Note: Before you start lay the
refrigerator
gain access to the base you should
rest it on soft foam packaging or
similar material to avoid damaging
the backboard of the refrigerator To
reverse the door the following steps
1. Stand the refrigerator upright
Open the upper door to take out all
door racks (to avoid rack sdamaged)
on its back in order to
,
.
,
.
.
.
İ10mm
9
2. Stand the refrigerator upright, first
remove the screw cover and loose
the screw and unscrew the upper
hinge cover which is at the top right
corner of the refrigerator, and use a
putty knife or thin-blade screwdriver
to prize the screw hole cover which
is at the top left corner of the
refrigerator. ķĸĹĺWarning! When reversing the door, the
appliance must not be connected to
the mains. Ensure that the plug is
8mm wrench
Model A B
1301 960
1172 938
C
740
670
HS-SK321
HS-SK251

3. Unscrew the flange screws ķwhich
are used for fixing the right upper hinge
part ĸ. Lift the upper door and place it
on a padded surface to prevent it from
scratching.
4. Remove the upper door and place it
on a smooth surface with its panel
upwards. Loose screwsĸ, detach
partķ, then install partķto the left
side with screwsĸNote: Please hold the upper door by hand
during step 3 to prevent door dropping.
6. Place the lower door on a smooth
surface with its panel upwards.Loose
screwsĸˈdetach partķThen install
partķto corresponding position on left
side together with screwsĸ5. Loose screws used to fix the middle
hinge and remove middle hinge. Then
remove the lower door.ĸright upper hinge part
ķflange screws
8. Place refrigerator flatwise, remove
partĹand then loose screwsĺRemove part ĸand partķĹUpper hinge cover (right)
ĸscrew
ķScrew cover
ĺScrew hole cover
1ĸSelf-tapping screws
ķStop block ķĸ7. Change screw hole covers on
middle cover plate from left to right (as
shown in figure below).
ĸself-tapping screws
ķDoor holder
12ķĸ10

9. Screw out lower hinge, change it to
the near hole site, and then screw up
10. Just remount to the step 8,change
part to left and part to right and then
fix them with screws Finally install
part
.
.
11. Move the lower door and adjust its
position to align lower hole site and
upper hinge axis. Turn the middle
hinge by 180, change the washer on
the axis to the upper side, adjust the
middle hinge to the appropriate
12. Screw out The upper hinge axis,
turn the upper hinge over and fix axis
washer
Front foot fixed board
Self tapping screws-
Lower hinge part right
13. Just remount to the step 2,change
upper hinge cover to left and fix them
with screws and then install the
screw cover Finally, change screw
.
screw
14. Open the upper door, mount door
.
Note: washer may
stick to lower door. Washer
Freezer
The freezer compartment is the 4-star
space.The temperature is always below
-18 ℃.
11

Descriptionoftheappliance1.
2.
.
4. Twist
5.
6.
7.
8.
9.
11.
12.
13.
15.
18.
3.
.
.
26.
3
10.
2
24
25
crisper
Note:Due to unceasing modification of our products, your
refrigerator may be slightly different from this instruction
manual, but its functions and using methods remain the
same.
Up
12

Control panel
High ambient temperatures (e.g. on hot
summer days) andacolder setting on the
temperature regulator can cause the
compressor to run continuously or even
non-stop!
So we do notadvisetheusersetthe
temperature control knob at “Colder”or
“Cold”
Reason:whentheambienttemperature is
high,thecompressormustruncontinuously to
chamber
The temperature regulator allows you to
●
●
Use your appliance according to the
followingcontrolregulations,your
appliancehasthecorresponding
functions as the control panels showed
In case of too much frozen food or ice
Please set the temperature control knob at
“Colder” position.
In case of using the refrigerator in usual
condition.Pleaseset the temperature
In case ofalittle frozen food in chamber.
Please set the temperature controller at
“Cold” position.
●
Important!
So we do not advise the user set the
temperaturecontrolknob at “Colder”or
“Cold”
When you turn the knob to "Colder” which
can lead to the more ennergy efficiency.
Otherwise, it would result the energy-
consuming.
Don't place too much food directly against
the air outlet of the temperature sensor part
in Wind channel cover of the refrigerator
compartment, as it affects that the
“Colder”.
“Mid”.
Important!
Important!
theairoutlet of Temperature
13

Crisper
Using your appliance
Your appliance has the accessories as the Description of the
appliance”showed in general with this part instruction you can have the right
way to use them
"
,
.
It is suitable for the storage of eggs,
canned liquid, bottleddrinks and
packed food, etc. Do not place too
many heavy things in the racks.
Small rack on lower door can be
placed at different heights according to
your requirements. Please take food
out of the shelf before lifting vertically
Note: There are egg trays in the upper
shelf and bottle holder in the lower
shelf.
There areshelves in refrigerator
chamber, and they can be taken out to
14
The crisper, mounted on telescopic
extension slides, is for storing
vegetables and fruits. You can adjust
the humidity inside by using the sliding
block.
The sliding block on crisper cover
can slide to left or right and the air hole
become more or less relatively. More
air hole opening means less humidity
We recommend that you store
vegetables with more humidity and
and
It is for controlling the temperature of
the crisper and the avoiding the
When you remove the crisper, pull
them forward, then lift the crisper off
the slides. Remember to empty food in
the crisper firstly. Onceyouhave
removed the drawers,ensure the
It is suitable for storage fruits and
vegetable.
of

Note: If the ice tray is used for the first
time or has not been used for a long
The twist ice tray is used to make and
deposit ice cubes. You should use it as
follows.
1. Pull out the twistable ice tray from
2. Pour water into the ice trays and the
water level shall not exceed the
ƽ3. Place the filled ice tray back to the
bracket.
4. When ice cubes form, twist the
knobs clockwise and the ice will drop
5. Ice cubes can be stored in the ice
box, if you need them, you can pull out
15
.
ķHeadĸWaterDispenserAssemblingnot.
door.
tank.
Slot
Guide
ķĸ
ĺ
Ĺ

Warning!16
position.
Caution!
Head
fixedholderwasherdispenser. Lock“UNLOCK”
situation.
Warning!“”.
“LOCK”
mechanism.
Warning!Warning!

Helpfulhintsandtipsƽƽƽrefrigerator or freezer, the internal
temperature will increase resulting in
the compressor having to work harder
Do cover or wrap the food
Place food properly so that air can
Meat (All Types) Wrap in polythene
food: wrap and place on the glass shelf
above the vegetable drawer. Always
follow food storage times and use by
They should be covered and may be
They should be stored in the special
Should be wrapped in airtight foil or
㸪ƽƽƽWe recommend that you follow the tips
Try to avoid keeping the door open
for long periods in order to conserve
energy.
Ensure the appliance is away from
any sources of heat (Direct sunlight,
Don't set the temperature colder than
necessary.
Don't store warm food or evaporating
Place the appliance in a well
ventilated, humidity free, room. Please
refer to Installing your new appliance
chapter.
If the diagram shows the correct
combination for the drawers, crisper
and shelves, do not adjust the
combination as this is designed to be
ƽƽƽƽƽƽƽCleaningdryer.
ƽ17

CleaningandcareFor hygienic reasons the appliance
(includ ing exterior and interior
accessories) should be cleaned
The appliance must not be
connected to the mains during
cleaning. Danger of electrical shock!
Before cleaning switch the appliance
off and remove the plug from the
To maintain good appearance of your
appliance, you should clean it
regularly.
-Wipe the control panel with a clean,
Spray water onto the cleaning cloth
instead of spraying directly on the
surface of the appliance. This helps
ensure an even distribution of moisture
Caution!-
-
surfaces with a mild detergent and then
Caution!
Don't use sharp objects as they are
Don't use Thinner, Car detergent,
Clorox, ethereal oil, abrasive cleansers
or organic solvent such as Benzene for
cleaning. They may damage the
surface of the appliance and may
You should clean the appliance interior
regularly. It will be easier to clean when
food stocks are low. Wipe the inside of
the fridge freezer with a weak solution
of bicarbonate of soda, and then rinse
with warm water using a wrung-out
sponge or cloth. Wipe completely dry
before replacing the shelves and
baskets.
-
-
Should have a lid and be stored in the
When first starting-up or after a period
out of use, let the appliance run at
least 2 hours on the higher settings
b e f o r e p u t t i n g f o o d i n t h e
compartment.
Prepare food in small portions to
enable it to be rapidly and completely
frozen and to make it possible to
subsequently thaw only the quantity
required.
Wrap up the food in aluminum foil or
polyethylene food wraps which are
airtight,
Do not allow fresh unfrozen food to
touch the food which is already frozen
Iced products if consumed
immediately after removal from the
㸪㸪ƽƽƽƽIt is recommended to label and date
each frozen package in order to keep
Ensure that frozen food has been
Once defrosted, food will deteriorate
rapidly and should not be re-frozen. Do
not exceed the storage period indicated
If the appliance needs to be switched
off for an extended period, the following
steps should be taken prevent mould
2. Remove the power plug from the
4. Ensure that all the doors are wedged
ƽƽƽƽƽ18

TroubleshootingIf you experience a problem with your appliance or are concerned that the
appliance is not functioning correctly, you can carry out some easy checks before
calling for service, please see below. You can carry out some easy checks
Thoroughly dry all surfaces and
Although this appliance automatically
defrosts, a layer of frost may occur on
the freezer compartment's interior
walls if the freezer door is opened
frequently or kept open too long. If the
frost is too thick, choose a time when
the supply of food stocks are low and
1 . R e m o v e e x i s t i n g f o o d a n d
accessories baskets, unplug the
appliance from the mains power and
leave the doors open. Ventilate the
room thoroughly to accelerate the
2. When defrosting is completed, clean
Caution!Don't use sharp objects to
rem ove frost from t he freezer
compartment. Only after the interior is
completely dry should the appliance be
switched back on and plugged back Caution!Take care to keep door seals clean.
Sticky food and drinks can cause seals
to stick to the cabinet and tear when
you open the door. Wash seal with a
mild detergent and warm water. Rinse
Only after the door seals are
completely dry should the appliance be
Warning: The LED light must not be
replaced by the user! If the LED light is
damaged, contact the customer
helpline for assistance. To replace the
LED light, the below steps can be
followed:
2. Remove light cover by pushing up
3. Hold the LED cover with one hand
and pull it with the other hand while
4. Replace LED light and snap it
19
Warning!Don't try to repair the appliance yourself. If the problem persists after you
have made the checks mentioned below, contact a qualified electrician, authorized

20