
of the blade are in line with the notches in the support and pressing the blade
downwards (Fig. 5).
WARNING: The blades are sharp; handle them with care.
- To use the appliance to whisk egg whites or whip cream, fit the special attachment
(H) onto the blade support (D), as illustrated in Fig. 6.
WARNING: Before staring the appliance, make sure that the bowl (M) and the disc (H)
are perfectly dean and without any traces of butter or egg yolk.
- Cut the foods into small pieces (1.5 x 1.5 cm) and place them inside the bowl (M) or
for mixing, insert the ingredients.
WARNING: Never add foods over the maximum level marked on the bowl (M).
- Fit the lid (N) over the bowl (M) moving the mark inside the bowl (M) so that it is in
line with the symbol ( ). Block the lid (N) so it dicks into place by moving it
clockwise( ) (Fig. 7).
WARNING: Make sure that the lid is firmly locked into place before starting the
appliance.
- Plug the appliance into the mains power.
- Start the appliance, selecting the rotation speed of the blade using the operating
dial (A).
The appliance has two operating speeds: minimum [1] and maximum [2].
WARNING: When the appliance is used to mix or whisk, we recommend starting at
speed“1" and then passing on to speed“2. When used to chop, it is advisable to use
the pulse function, turning the dial (A) anticlockwise to the“P" setting. For optimum
use, press the button in short bursts (2/3sec.).
WARNING: Never operate the appliance for more than 30 seconds at a time. Wait at
least 2 minutes before operating it again.
- For smoother, finer chopped foods, remove the food, if necessary, from the sides of
the bowl with a spatula, pushing it towards the centre.
WARNING: Never remove foods from the sides of the bowl while the appliance is
operating. Switch off the appliance first and unplug it from the mains power.
WARNING: To prevent accidents or damage to the appliance, always keep hands and
cooking utensils well away from moving blades or discs.
WARNING: Never use your fingers to remove food from the sides of the bowl while
the appliance is operating. Always use the special spatula.
- If it is necessary to add foods during appliance operation, use the opening in the lid
(N). Push the foods down with the pusher (G) on its own (Fig.8).
WARNING: Never insert foods by hand. Always use the pusher.
- To stop the appliance, turn the dial (A) to “0".
SLICING
WARNING: The blades are sharp; handle with care.
- Fit the required blade, the slicing blade (K), julienne blade (J) or chip blade (L) into
the blade disc (I) so that the hole in the blade is in the centre of the disc (Fig. 9).
- Fit the assembled blade support disc (I) on the motor shaft (C), gripping it by the