Kuat IBEX User manual

ASSEMBLY
ASSEMBLY VIDEO
IBEX™
ANTENNA MOUNT

Parts
5mm Hex Key
(1) T-NutAntenna Mount
(1) M8 x 12 Bolt

Antenna Mount Installation
1Place (1) T-Nut in lower IBEX™ T-Nut channel.
2Install Antenna Mount into T-Nut using (1) M8 x 12 Bolt.
Installation of the antenna into the mount may need to occur
before Antenna Mount Installation, depending on desired location
on the IBEXTM.

Warnings
[email protected] 1.877.822.5828
WARNINGS
• Follow instructions for proper assembly, installation and use.
• Check tightness of all bolts and screws periodically.
• Drive responsibly.
If you have questions or problems, please contact Küat directly by calling toll free
1(877)822-KUAT, or by email: [email protected]
ADVERTENCIAS
• Siga las instrucciones para un montaje, instalación y uso adecuados.
• Verifique periódicamente el apriete de todos los pernos y tornillos.
• Conduzca con responsabilidad.
AVERTISSEMENTS
• Suivez les instructions pour un assemblage, une installation et une utilisation appropriés.
• Vérifiez périodiquement le serrage de tous les boulons et vis.
• Conduisez de façon responsable.
IBEX™
ANTENNA MOUNT

NO WORRIES LIMITED WARRANTY
We stand behind our products, and our customer service
reps are waiting to help you out if you have any problems
with your product. Our limited warranty covers your
purchase for life. You can review our limited warranty on our
website or call customer service at the number below if you
have questions or need a repair, replacement, refund, or a
copy of the limited warranty.
www.kuat.com/warranty
Questions or comments?
Drop us an email or call us directly!
kuat.com |[email protected] |877.822.5828

kuat.com
[email protected]
1.877.822.5828
v3