KV2 Audio ESR106 User manual

User Guide
ESR Series
ESR106 · ESR2600D
The Future of Sound. Made Perfectly Clear.
At KV2 Audio our vision is to constantly develop technologies that eliminate distortion and loss
of information providing a true dynamic representation of the source.
Our aim is to create audio products that absorb you, place you within the performance and deliver
a listening experience beyond expectations.

ESR Series · Important Safety Instructions
Important Safety Instructions
Before using your ESR Series, be sure to carefully read the applicable items of these operating instructions
and the safety suggestions.
1. Read all product instructions.
2. Keep printed instructions, do not throw away.
3. Respect and rewiew all warnings.
4. Follow all instructions.
5. Do not use this unit near water, in unprotected out door areas or in rain or wet conditions.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
8. Install in accordance with KV2 Audio's recommended installation instructions.
9. Do not install near any heat sources such as heat radiators, heat registers, stoves or other apparatus
that produce heat.
10. Do not defeat the safety purpose of the grounding type plug. A grounding type plug has two blades
and a third grounding connector. The third connector is provided for your safety. If the provided plug
does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
11. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles.
The AC mains plug or appliance coupler shall remain readily accessible for operation.
12. Only use accessories specied by KV2 Audio.
13. Install the product only with rigging specied by KV2 Audio, or sold with the loudspeaker.
14. Unplug this loudspeaker during lightning storms or when unused for long periods of time.
15. Refer all servicing to qualied service personnel. Servicing is required when the loudspeaker has been
damaged in any way, such as when the power-supply cord or plug has been damaged; liquid has been
spilled or objects have fallen into the loudspeaker; rain or moisture has entered the loudspeaker;
the loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not operate
normally.
16. Do not remove front or back panels. Removal of the panel will expose hazardous voltages.
There are no user serviceable parts inside and removable may void the warranty.
17. An experienced user shall always supervise this professional audio equipment.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE PANELS.
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING: To prevent re or electric shock, do not expose this equipment to rain or moisture.
SAFETY SUMMARY
To reduce the risk of electric shock, disconnect the loudspeaker from the AC mains before installing audio cable.
Reconnect the power cord only after making all signal connections. Connect the loudspeaker to a twopole, three- wire
grounding mains receptacle. The receptacle must be connected to a fuse or circuit breaker. Connection to any other
type of receptacle poses a shock hazard and may violate local electrical codes. Do not allow water or any foreign object
to get inside the loudspeaker. Do not put objects containing liquid on or near the unit. To reduce the risk of overheating the
loudspeaker, avoid exposing it to direct sunlight. Do not install the unit near heat-emitting appliances, such as a room heater
or stove. This loudspeaker contains potentially hazardous voltages. Do not attempt to disassemble the unit. The unit contains
no user serviceable parts, repairs should be performed only by factory trained service personnel.
ESR Series · Important Safety Instructions

ESR Series · Content
Introduction ESR Series / ESR Brackets and Flybars / Warning 5
Introduction 5
ESR106 6
Introduction 6
Specications 7
Frequency characteristics 8
Drawing 9
ESR2600D 10
Introduction 10
Getting Started - Unpacking / Amplier rack mounting / Cooling / AC Requirements 11 - 12
Front panel 13
Rear panel 14 - 15
Display menu description 16
Web-server 17
Remote management - Overview / Channels / Diagnostics / Settings 18 - 21
Specications 22
Using the System - Full range setup / External subwoofer setup 23 - 24
Accessories 25 - 27
Warranty · Service 28
Notes 29 - 30
Content
ESR Series · Content

ESR Brackets and Flybars · Introduction · Warning
Introduction
This manual is presented by KV2 Audio, to enable the clear and precise instructions for the safe practice and execution
of overhead suspension, or ying of the KV2 Audio ESR Full range Loudspeaker products, using the ESR BRACKETS and FLYBARS.
It is vitally important that operators and users familiarize themselves with all of the components, parts, products and safety
instructions, as described and indicated within this document, before attempting any overhead suspension of the ESR
Brackets and Flybar systems.
The ESR Loudspeaker enclosures are designed with integral suspension points to facilitate secure vertical and Horizontal
suspension and rigging, providing that no modications or external parts are substituted, and that all instructions are
adhered to at all times.
KV2 Audio operates a continuing process policy of attaining and improving standards.
This means that instructions and methods may be subject to change without notication, and it is the sole responsibility
of the operator/user to check for any updated information regarding safe stacking and ying procedures whether locally
or Internationally.
Warning - Safety Rigging
There are accepted 'General Rigging Practices' appropriate to the entertainment industry and this Document aims to
encapsulate them specically to the safe vertical and horizontal suspension of the KV2 ESR Loudspeaker systems described here.
It is extremely vital and important that only personnel whom have the qualications and certicates, Prior knowledge and
experience of rigging techniques, attempt the execution of any suspension conguration utilizing the ESR Brackets and
Flybars for the KV2 ESR products.
All advice and instructions expressed and stated within this document, are based upon the highest engineering data
available at the time of publication, from within the Country of manufacture, with regards to materials and general practice
techniques.
Specications are subject to change, due to constant testing, product updates and renements and R&D.
'General Rigging Practices' means that Regulations and requirements are possibly subject to alterations in dierent countries
and may be superseded locally.
KV2 Audio, as such is not responsible for the safety of any suspension, ying overhead of all specic KV2 Audio Loudspeaker
products, or Rigging congurations as executed in practice by users.
It is expressly the sole responsibility of the user to ensure that at all times any KV2 Audio product, or system is Ground
stacked, suspended and rigged in accordance with current International and local regulations.
All non KV2 Audio products such as hoists, clamps, wires, truss, supports used, or required to assure stability, or suspend KV2
Audio Loudspeaker product are the sole responsibility of the user.
Warranty
Your ESR Brackets and Flybars are covered against defects in material and workmanship.
Refer to your supplier for more details.
Service
In the unlikely event that your ESR Brackets and Flybars develop a problem, it must be returned to an authorized distributor,
service center or shipped directly to our factory. Because of the complexity of the design, only qualied technical personnel
must attempt all repairs.
If the unit needs to be shipped back to the factory, it must be sent in its original carton, or suitable alternatives. If improperly
packed, the unit maybe damaged in transit.
To obtain service, contact your nearest KV2 Audio Service Centre, Distributor or Dealer.
ESR Brackets and Flybars · Introduction · Warning
5

ESR106 · Introduction
Introduction
The ESR106 is an active driven 3 way system employing a unique column array
of multiple 6“ woofers for unparalleled high quality vocal and music reproduction
in challenging acoustical spaces and ambient environments.
Utilising 8 x 6“ woofers, 2 x 6“ mid bass woofers and a single 1“ high frequency driver
mounted on a wide dispersion horn, the ESR106 is constructed to represent one large
point source, with each part of the system positioned so that it is proportional in size
to the frequency wavelength it produces, thus the radiated power of each bandwidth
remains consistent and balanced in relevance throughout the overall frequency
response. The ESR106 has a controlled coverage at low and mid frequencies to reduce
indoor reections.
The ESR106 is controlled and driven by a dedicated ESR2600D amplier, using KV2
Audio proprietary SLA technology.
ESR106 - part number KVV 987 511
Application
• Fixed Installations
• Theatres & Auditoriums
• Concert Halls
• Houses of Worship
• ALWAYS used in a vertical orientation
Features
• Full range 3 way system incorporating state of the art multiple transducers.
• Multi point xings for external brackets and yware.
• True musical solution for speech, vocals and music playback in dicult acoustical
environments.
ESR Full Range Sound System Benets
Total exibility
ESR Series does not require a large number of speakers. It provides a full range, very
high quality sound from a single, small, discreet source. For extended bass choose
from a wide range of KV2 Audio subwoofers. The subwoofers can be placed
in a convenient remote location, due to the low 70Hz crossover point between
an ESR106 module and the subwoofer.
Superb sound
Greater dynamic range than standard column or steerable speaker designs, featuring
VHD (Very High Denition) technology with Super Analog amplier technology.
Easy set-up
Plug-and-play connection to the ESR2600D amp/processor module. Cabinet features
side handles and sixteen M10 suspension points.
6
ESR106 · Introduction

ESR106 · Specications
System Acoustic Perfomance
Max SPL Long-term 131dB
Max SPL Peak 134dB
-3dB Response 60Hz to 20kHz
-10dB Response 52Hz to 28kHz
Crossover Point 450Hz, 2.4kHz
High Frequency Section
Acoustic Design Horn Loaded
High Horn Coverage Horizontal / Vertical 100° x 80°
Power Handling 100W from ESR2600D Amplier
Rotatable Horn NO
Throat Exit Diameter / Diaphragm Size 1" / 1.75"
Diaphragm Material Titanium
Magnet Type Neodymium
Mid Range Section
Acoustic Design Sealed enclosure
Woofer Size / Voice Coil Diameter 2x 6" / 1,75"
Power Handling 200W from ESR2600D Amplier
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium
Low Frequency Section
Acoustic Design Front Loaded, Bass Reex
Woofer Size / Voice Coil Diameter 8x 6" / 1,75"
Power Handling 1000W from ESR2600D Amplier
Magnet Type Neodymium
Diaphragm Material Epoxy Reinforced Cellulose
Speaker Input
Speaker Input 1x AMPHENOL 6
Cabinet
Cabinet Material Baltic birch
Handles 4
Color "Orange peeled" Matt Black or any RAL
Physical Dimensions
Height 2048 mm (80.629")
Width 250 mm (9.842")
Depth 268 mm (10.551")
Weight 42,5 kg (93.7lbs)
Specications
7
ESR106 · Specications

ESR106 · Frequency characteristics
Frequency response
500Hz - 2kHz
Horizontal Polarplots
Vertical Polarplots
73Hz - 250Hz 4kHz - 16kHz
73Hz
125Hz
250Hz
500Hz
1kHz
2kHz
4kHz
8kHz
16kHz
73Hz - 250Hz 500Hz - 2kHz 4kHz - 16kHz
73Hz
125Hz
250Hz
500Hz
1kHz
2kHz
4kHz
8kHz
16kHz
8
ESR106 · Frequency characteristics

Drawing
ESR106 Architects and Engineer’s Specications
The three-way loudspeaker system shall incorporate eight 6-inch low frequency (LF) transducers, two 6-inch mid-range (MR)
transducers and a 1-inch exit compression driver high frequency (HF) transducer. The LF drivers shall be mounted above
and below the mid-high horn tuned for optimum mid-bass response and dispersion. The HF transducer shall be loaded
on an integrated, constant directivity horn assembly.
The loudspeaker enclosure shall have a rectangular shape and shall incorporate two handles on each vertical side.
The Enclosure incorporates sixteen M10 suspension points, three M10 suspension points on each vertical side, four M10
suspension points on the top and bottom and two on the rear panel side. The speaker cabinet shall be nished with an ultra
wear resistant black polymer coating and tted with a weather resistant perforated steel grill.
The system shall receive power from a separate ESR2600D Amplier.
The ESR2600D Stereo (two channel) Amplier/Controller Module consists of separate power ampliers for high, midrange
and mid bass transducers as well as signal processing including electronic band pass crossover lters, phase alignment, time
correction, equalization and speaker protection. The speaker system shall connect to the Amplier/Controller Module via
proprietary cables terminated in Amphenol AP-6 connectors.
The three-way loudspeaker system shall be the KV2 Audio ESR106.
ESR106 · Drawing
9
ESR106 · Drawing

ESR2600D · Introduction
ESR2600D - part number KVV 987 514 (250V)
KVV 987 513 (230V)
KVV 987 512 (115V)
Front Panel:
Rear Panel: Side Panel:
Application
Specically designed as the amplication and control
unit for the ESR106 loudspeaker system in a 4RU mount
module with integrated Control & Diagnostics.
• Fixed Installations
• Theatre and Music venues
• Houses of worship
• Classical and opera concerts
Features
The amplier compliment inside the ESR2600D Amplier is as follows:
• High Frequency - 2x 100-watt, Class AB, push pull, low intermodulation design
• Mid Frequency - 2x 200-watt, Class AB, push pull, low intermodulation design
• Low Frequency - 2x 1000-watt, high-eciency, current-enhancing switching design
Introduction
ESR2600D Amplier with Control & Diagnostics
The ESR2600D is a two channel (stereo) three-way, active control and amplication system specially designed for the KV2
Audio ESR106 full range loudspeaker system. It houses all signal processing and amplication, as well as providing control
and crossover functions for adding external subwoofer cabinets if required, utilizing external ampliers. The ESR26000D
is now congurable via the front panel or remotely using the KV2 Control & Diagnostics Tool.
The ESR2600D incorporates six ampliers consisting of two 100-watt, Class AB, push pull, low intermodulation ampliers
for high frequencies, two 200-watt, Class AB, push pull, low intermodulation design ampliers for mids and two 1000-watt,
high-eciency, current-enhancing switching technology ampliers for bass. The ESR2600D stereo conguration powers two
ESR cabinets accordingly.
Congurable via the front panel or remotely using the KV2 Control & Diagnostics Tool.
10
ESR2600D · Introduction

ESR2600D · Getting Started
Unpacking
Unpack the ESR2600D Amplier and check for any damage. If you nd any damage, notify your supplier immediately. Only
the consignee may institute a claim with the carrier for damage incurred during shipping. Be sure to save the carton and all
packing materials for the carrier's inspection. Should you ever need to ship the unit, only use the original factory packaging.
If the shipping carton is unavailable, contact your supplier to obtain a replacement.
The ESR2600D Amplier carton should contain:
• ESR2600D Amplier control unit
• Thisuserguide
• TwoPowerCondetachablepowercables
Amplier rack mounting
The ESR2600D Amplier is 4 rack units in height and will mount in standard 19" rack system. Integral rear mounting rack
ears are also provided for additional support, do not rely on xing and mounting the amplier using just the front panel as
support. Use eight screws and washers to mount the amplier to the equipment rack rails. We recommend using a shock
mounted rack for touring use to prolong the life of your amplier.
Cooling
The ESR2600D Amplier has a comprehensive cooling system featuring chassis sealed PCB board mounting and shock
mounted, speed controlled fans. This means that the cooling system never drives air across PCB boards, connectors or
components, ensuring prolonged electronic component lifespan and minimizing maintenance cycles.
Air is drawn into the front of the amplier by the two fans on the rear panel, this passes over the cooling ns of the heat sinks
and exhausts through the rear. If the heat sink gets too hot, its sensing circuit will open the output relay, disconnecting the load.
It is important to have an adequate air supply at the front of the amplier, and enough space around the rear of the amplier to
allow the cooling air to escape. If the unit is rack mounted, do not use doors or covers on the rear of the rack, the exhaust air must
ow without restriction. If you are using racks with closed backs, use fans on the rear rack panel to ensure an ample air supply.
IMPORTANT! Please note that for correct full performance of the unit AND ANY WARRANTY COVER,
it is important that regular maintenance of the front vents and lters as well as the rear panel fans be inspected
and cleaned by removing any dust and debris build-up. Any product failure due to lack of attention in this matter will
immediately void any current warranty. (Please refer to notes re ventilation procedures).
11
ESR2600D · Getting Started

ESR2600D · Getting Started
AC Requirements
Two PowerCon cables are provided to connect the ESR2600D Amplier to suitable AC power supplies. Each cable powers
each separate amplier channel for sucient current delivery.
THE ESR2600D REQUIRES A GROUND CONNECTION. ALWAYS USE A GROUNDED OUTLET AND PLUG.
The PowerCon is a connector without any circuit breaking capability, i.e. the PowerCon should not be connected
or disconnected under load or while it is live. Always isolate your AC supply before disconnecting the PowerCon connector.
The ESR2600D amplier operates in either 115V, 230V or 250V modes. Although pre-congured at the factory, the unit's
operating voltage mode can be changed in the eld. The Amplier power plug must be fully removed before any attempt
is made to change the operating voltage. The power cord must always be easily accessible for a quick disconnection from
the power outlet, if required.
Your amplier will be supplied preset to the voltage used in your area. The table below provides typical current draw gures
for the ESR2600D Amplier.
The receptacle must be connected to a fuse or circuit breaker. Connection to any other type of receptacle poses a shock
hazard and may violate local electrical codes.
Do not allow water or any foreign object to get inside the amplier. Do not put objects containing liquid on or near the unit.
To reduce the risk of overheating the amplier, avoid exposing it to direct sunlight.
Do not install the unit near heat-emitting appliances, such as a room heater or stove. This amplier contains potentially
hazardous voltages. Do not attempt to disassemble the unit. The unit contains no user serviceable parts, repairs should be
performed only by factory trained service personnel.
AC Input Current draw with
amplier running at Average
Power (Each Channel)
Current draw with
amplier running at
Peak Power (Each Channel)
250V 3.2A 5A
230V 3.5A 5.4A
115V 7A 11A
Current draw of ESR2600D Amplier
12
ESR2600D · Getting Started

ESR2600D · Front panel
Front Panel
1) AC Mains Switch
The ESR2600D has combination AC mains switch/circuit breakers on the front panel. If either of the switches shut o during
normal use, push it back to the ON position once. If it will not stay on you should take the unit to qualied service personnel
to have it serviced.
2) Power / Thermal
These are dual colour LED's. When green they indicate that the Power Switch is ON and that channel of the amplier is
powered up. When red they indicate that that channel has overheated and shut down. The unit will Auto Reset after it cools
down to a safe operating temperature.
3) Signal / Speaker Protection
Indicator These are dual colour LED's. When green they indicate that signal is present at the Input to that particular channel
of the amplier. When yellow they indicate that the audio speaker protection limiter has been activated for that particular
channel of the amplier.
4) Display
Shows the set parameters and allows settings of various functions in the menu.
5) Rotation encoder with Enter push-button
The encoder serves as the main way for increasing (clockwise), or decreasing (counter clockwise) values and menu positions.
The encoder also serves as the ENTER (PUSH) button, allowing the operator to enter/leave the submenu in the main menu.
4 2 31 5
13
ESR2600D · Front panel

ESR2600D · Rear panel
Rear Panel ESR2600D
1) Main Input / Through Out
These are the input XLR connectors for channel A & B with associated 'Through Output' connectors for sending signal
to other devices.
2) Sub out Balanced XLR output connector
Sub out Balanced XLR output connector, crossed over LPF, used to connect additional subwoofers. This output is still active
even when FULL RANGE mode is activated.
3) PowerCon Power Connector
The ESR2600D Amplier uses one AC PowerCon connector per channel. Each connector supplies one channel. They accept
standard PowerCon terminated AC Mains cables.
4) Fans
The cooling fans operate continuously while the ESR2600D is on. An internal temperature sensor increases the speed of
the fans during high temperature conditions. Air enters through the front grille and exits through the rear. Be sure to allow
adequate air ow to the front of the rack in which the ESR2600D is mounted.
12 3 4
14
ESR2600D · Rear panel

ESR2600D · Rear panel
Rear Panel
Communication
5) Reset
Serves as factory reset button for the control and diagnostics section. Resets all setup, including network settings (default
settings AutoIP/DHCP). Use a tool with maximum diameter 2mm.
6) Status
LEDs indicates amplier and amplier diagnostics status, these are:
AMP
Dual colour LED. When green, it indicates that the power amplier is powered up and all monitored parameters are OK.
When red, it indicates that amplier is o, or some problem with the amplier has occured, more information can be
obtained via Ethernet.
POE
When green, it indicates that the diagnostics unit is powered via Power over Ethernet device.
DHCP
When green, it indicates that the diagnostics Ethernet IP address is assigned from the DHCP server.
7) Ethernet connector
Serves as a external communication port supporting Ethernet standard, accepts RJ45, T-658B wiring. The ESR2600D provides
web-server and SNMP (Simple network management protocol). When the Ethernet cable is connected and devices successfully
establish a connection, the green LED is activated. When Ethernet communication is in progress, the orange LED ashes.
8) Speaker AP6 Connectors
Accepts a standard AP6 terminated loudspeaker cable for connecting up to a single ESR106 cabinet. We recommend using
2.5mm/six core cables.
5 6 7 8
15
ESR2600D · Rear panel

ESR2600D · Display menu description
MAIN
MUTE
Mute switch set channel A&B mute on / o.
VOL
Sets the amplier input sensitivity in range from -24 to +6 dBu with 0.5dB step.
BAND MUTE
Band Mute switch allows individual muting of the LOW, MID, HI band outputs.
SUB
MUTE
Sub Mute switches SUB OUT A&B on / o.
VOL
Sets the SUB OUT level in range
from -24 to +6 dBu with 0.5dB step.
SETUP
SUM MONO
Switches in the summing of SUB OUTs A & B to produce a summed mono sub output.
FULL RANGE
When ON, full range signal is reproduced by the ESR106 cabinets, when OFF the ESR
106’s will only operate down to 70Hz, requiring an additional external subwoofer
for enhanced low frequency reproduction.
FACTORY RESET
Resets the ESR2600D amplier channels settings to factory default. Device
identication, Security and Network setup may be reset using the rear panel reset
button.
NET
NAME: Displays amplier name.
IP: Displays assigned network address.
MASK: Displays assigned network subnet mask.
Amplier name and IP address may be changed using web-server.
Display menu description
The ESR2600D has four main display screens for indication and setup. Main screens are: MAIN - for input levels and mutes.
SUB for subwoofer output levels and mutes. SETUP for SUB MONO mode, FULL RANGE mode and factory reset. NET for
network IP address and name indication.
16
ESR2600D · Display menu description

ESR2600D · Web-server
ESR2600D Web-server
The ESR2600D web-server is accessible using a standard web browser on PC or mobile device. The appropriate ESR2600D
network address must be set to access web-server. The web-browser device IP address must be set from the same network
range and must be connected into the same network.
IP addresses are assigned to networked devices when they are congured for a specic network. The way that they are
assigned can be static or dynamic.
The ESR2600D network address may be set several ways:
Auto IP
(Default) Automatic Private IP Addressing, is a method of automatically assigning IP addresses to networked devices.
A networked device congured to use Auto IP rst makes a request to a DHCP server for an address. If the device does
not receive an IP address, which happens when there is no DHCP server on the network or when the DHCP server is not
responding, the device assigns itself an address. Auto IP addresses always follow this pattern: 169.254.x.y, where xand yare
any two numbers between 0 and 255. Unlike DHCP, Auto IP does not require a router or a separate server to assign an IP
address. The selected IP address is displayed on display - section NET, or can be obtained using the KV2 diagtool software.
DHCP
Dynamic Host Conguration Protocol. A DHCP server enables network devices to request IP addresses and networking
parameters automatically from the DHCP server, reducing the need for a network administrator or a user to manually assign
IP addresses to all network devices. The assigned IP address is displayed on display - section NET, or can be obtained using
the KV2 diagtool software.
It is important to know that a dynamic IP address can change. If a network device with a dynamic IP address suddenly stops
responding at its IP address, it is possible that it has obtained a new lease and its address has changed.
Static
A static IP address must be manually assigned to a network device. This address is typed by the person who sets up devices
on the network, and it never changes. A static IP address changes when the person who administers the network specically
changes it.
17
ESR2600D · Web-server

ESR2600D · Remote management
Web-server page
Open the ESR2600D web-server, use the ESR2600D IP address, which is shown on display - section NET, or can be obtained
using the KV2 diagtool software.
Overview
Shows the amplier basic information.
Basic Information
Shows the information assigned by user of the amplier: Description, Amplier name, Location, Contact, Uptime.
Network status
Shows the amplier ethernet network address, netmask, mode and status.
Power
Shows the amplier power sources status: Mains power, Channel A & B power sources, Power over Ethernet.
Temperature
Shows the amplier channel A & B heat sinks temperatures, Diagnostic CPU temperature.
2600
18
ESR2600D · Remote management

ESR2600D · Remote management
Channels
Shows the amplier control parameters and amplier diagnostics information.
Control
Changes the amplier A&B control parameters, Full range (ON or OFF) , SUB Mono (ON or OFF), Mute (RED = amplier muted),
Input level (-24 to +6 dB), SUB level (-24 to +6 dB), Band mute (SUB, LOW, MID, HI mute ON or OFF)
Diagnostics
Shows amplier diagnostics information.
Signal
Green when input signal is present.
Speaker protection
Orange when speaker protection hits.
Temperature
Shows the amplier channel A & B heat sinks temperatures.
Output voltage
Shows the amplier speaker output voltage.
Output current
Shows the amplier speaker output current.
Impedance
Shows the amplier calculated load Impedance.
19
ESR2600D · Remote management

ESR2600D · Remote management
Diagnostics
Shows the ESR2600D amplier and its components diagnostics information. Dual colour - Green = OK / Red = no power
or some problem occurs.
Device
Sums ESR2600D diagnostics together
Channel A & B
Sums amplier channel diagnostics information: Power source, Temperature, Health (ampliers A / B LOW, MID, HI working
OK with dedicated gain)
Temperature
Displays ampliers heat sinks A & B temperatures (°C).
Protection
When red they indicate that that channel has overheated and shut down. The unit will Auto Reset after it cools down to a safe
operating temperature.
20
ESR2600D · Remote management

21
ESR2600D · Remote management
Settings
Shows and sets the device information, web-server password, network address.
Device identication
Shows and sets the device local information, Device name, Location, Contact.
Security
Sets name and password for web-server security (default User name: admin, default Password: admin)
Network
Sets the Ethernet IP mode. AutoIP/DHCP (default). Static (IP address and netmask must be set).
21
ESR2600D · Remote management