L-Acoustics 12XTi User manual

12XT
12XT12XT
12XT i coaxial enclosure
coaxial enclosurecoaxial enclosure
coaxial enclosure
12XT
12XT12XT
12XT i enceinte
enceinteenceinte
enceinte coaxiale
coaxialecoaxiale
coaxiale
VER
VERVER
VERSION 1.1
SION 1.1SION 1.1
SION 1.1
w w w . l - a c o u s t i c s . c o m
USER MANUAL
MANUEL D’UTILISATION
FR
EN

12XTI_UM_ML_1-1
w w w . l - a c o u s t i c s . c o m
1
11
1 en
EN
1
11
1SAFETY WAR I GS
SAFETY WAR I GSSAFETY WAR I GS
SAFETY WAR I GS
All information hereafter detailed applies for the L-ACOUSTICS
®
12XTi Coaxial Enclosure, designated in this
section as ‘‘the roduct’’.
1.1 Symbol descri tion
Throughout this manual the potential risks are indicated by the following symbols:
The WARNING symbol indicates a potential risk of physical harm to the user or people within close
pro imity to the product.
In addition, the product may also be damaged.
The CAUTION symbol notifies the user about information to prevent possible product damage.
The IMPORTANT symbol is a notification of an important recommendation of use.
1.2 Im ortant safety instructions
1. Read this manual
2. Heed all safety warnings
3. Follow all instructions
4. The user should never incor orate equi ment or accessories not a roved by L-ACOUSTICS
®
5. Sound Levels
Sound systems are capable of producing high Sound Pressure Levels which can be dangerous and
potentially cause hearing damage especially when e posed to them over a long period of time.
Do not stay within close pro imity of the loudspeakers when operating.
6. Heat
Do not operate the product near any heat source, such as radiators or other devices.
!
WARNING
!
IMPORTANT
!
CAUTION
!
WARNING
!
CAUTION

12XT
12XT12XT
12XT i COAXIAL E CLOSURE
COAXIAL E CLOSURECOAXIAL E CLOSURE
COAXIAL E CLOSURE
user manual
user manualuser manual
user manual
VERSIO 1.1
12XTI_UM_ML_1-1
w w w . l - a c o u s t i c s . c o m
2
22
2 en
7. Water and moisture
Even if the product is weather-resistant, it can not be e posed to moisture (rain, sea spray, shower,
steam) for a long period of time, nor put in direct contact or partially immersed in water. This would
cause irreversible damage to e posed components.
8.
System Parts and Rigging ins ection
All system components must be inspected before use, in order to detect any possible defects.
Please refer to the “Care and Maintenance” section of this manual as well as any other manuals
pertaining to the system for a detailed description of the inspection procedure.
Any part showing any sign of defect must immediately be put aside and withdrawn from use to be
inspected by qualified service personnel.
9. Mounting instructions
Do not place the product on an unstable cart, stand, tripod, bracket, or table. The product may fall
and be seriously damaged, and may cause serious human injury.
Any mounting of the product should follow the manufacturer’s instructions given in this manual,
and should use a mounting accessory recommended by the manufacturer.
10.
Conditions which require immediate service
Servicing is required when the product has been damaged in any way such as:
•
••
•The product has been e posed to rain or moisture,
•The product was dropped or the enclosure is damaged,
•The product does not operate normally.
11. Manual
Keep this manual in a safe place during the product lifetime. This manual forms an integral part of the
product. Reselling of the product is only possible if the user manual is available. Any changes made to
the product have to be documented in writing and passed on to the buyer in the event of resale.
!
IMPORTANT
!
WARNING
!
WARNING
!
CAUTION
!
CAUTION

12XTI_UM_ML_1-1
w w w . l - a c o u s t i c s . c o m
3
33
3 en
EN
1.3 EC declaration of conformity
L-ACOUSTICS
®
13 rue Levacher Cintrat
Parc de la Fontaine de Jouvence
91462 Marcoussis Cede
France
States that the following product:
Loudspeaker enclosure, 12XTi
Is in conformity with the provisions of:
Machinery Directive 2006/42/EC
Low Voltage Directive 2006/95/EC
Applied rules and standards:
EN ISO 12100-1: 2004 (Mechanical Safety)
EN60065 (Electrical Safety)
Established at Marcoussis, France
November 10
th
, 2009
Christophe Pignon

12XT
12XT12XT
12XT i COAXIAL E CLOSURE
COAXIAL E CLOSURECOAXIAL E CLOSURE
COAXIAL E CLOSURE
user manual
user manualuser manual
user manual
VERSIO 1.1
12XTI_UM_ML_1-1
w w w . l - a c o u s t i c s . c o m
4
44
4 en
2
22
2CO
COCO
CO TE TS
TE TSTE TS
TE TS
1 SAFETY WARNINGS 1
1.1 Symbol description .................................................................................................................................................. 1
1.2 Important safety instructions ................................................................................................................................... 1
1.3 EC declaration of conformity .................................................................................................................................. 3
2 CONTENTS 4
3 INTRODUCTION 5
3.1 Welcome to L-ACOUSTICS
®
.................................................................................................................................. 5
3.2 Unpacking ................................................................................................................................................................ 5
4 XTi ARCHITECTURAL SERIES 6
5 12XTi COAXIAL ENCLOSURE 8
6 INSTALLATION 9
6.1 Flying or stacking the 12XTi .................................................................................................................................... 9
6.2 Connecting speakers ............................................................................................................................................... 9
7 OPERATION 11
7.1 System configuration ............................................................................................................................................. 11
7.2 “FULL RANGE” mode .......................................................................................................................................... 12
7.2.1 Description ............................................................................................................................................ 12
7.2.2 Connecting the 12XTi to the LA4 / LA4X ............................................................................................. 12
7.2.3 [12XTP_FR], [12XTP_FI], and [12XTP_MO] presets .......................................................................... 12
7.3 “HIGH-PASS” mode .............................................................................................................................................. 13
7.3.1 Description ............................................................................................................................................ 13
7.3.2 Connecting the 12XTi to the LA4 / LA4X ............................................................................................. 13
7.3.3 [12XTP_FR_100], [12XTP_FI_100], and [12XTP_MO_100] presets .................................................. 13
7.4 “LOW-EXTENSION’’ mode ................................................................................................................................. 14
7.4.1 Description ............................................................................................................................................ 14
7.4.2 Connecting the 12XTi and SB18i to the LA4 / LA4X ............................................................................ 14
7.4.3 [12XTP_SB18i] preset ........................................................................................................................... 15
8 CARE AND MAINTENANCE 16
8.1 Maintenance information ....................................................................................................................................... 16
8.2 Testing procedure ................................................................................................................................................. 16
8.2.1 Check of transducer and enclosure acoustic behavior .......................................................................... 16
8.2.2 Check of mechanical assembly and rigging parts ................................................................................... 16
8.2.3 Check of e ternal aspect ....................................................................................................................... 16
8.3 Transducer service ................................................................................................................................................ 17
8.3.1 LF loudspeaker ....................................................................................................................................... 17
8.3.2 HF diaphragm......................................................................................................................................... 17
8.4 Spare parts and recommended tools ..................................................................................................................... 18
9 SPECIFICATIONS 19

12XTI_UM_ML_1-1
w w w . l - a c o u s t i c s . c o m
5
55
5 en
EN
3
33
3I TRODUCTIO
I TRODUCTIOI TRODUCTIO
I TRODUCTIO
3.1 Welcome to L-ACOUSTICS
®
Thank you for purchasing the L-ACOUSTICS
®
12XTi Coaxial Enclosure.
This manual contains essential information on installing and operating the product correctly and safely. It is necessary to
read this manual carefully in order to become familiar with these procedures.
As art of a continuous evolution of techniques and standards, L-ACOUSTICS
®
reserves the right to
change the s ecifications of the roduct and the content of this manual without rior notice. Please check
the L-ACOUSTICS
®
web site at www.l-acoustics.com on a regular basis for latest u dates.
Should the product requires repair or if information about the warranty is needed, please contact an approved
L-ACOUSTICS
®
distributor. The address of the nearest distributor is available on the L-ACOUSTICS
®
web site.
3.2 Un acking
Carefully open the shipping carton and check the product for any noticeable damage. Each L-ACOUSTICS
®
product is
tested and inspected before leaving the factory and should arrive in perfect condition.
If found to be damaged, notify the shipping company or the distributor immediately. Only the consignee may initiate a
claim with the carrier for damage incurred during shipping. Be sure to save the carton and packing materials for the
carrier's inspection.

12XT
12XT12XT
12XT i COAXIAL E CLOSURE
COAXIAL E CLOSURECOAXIAL E CLOSURE
COAXIAL E CLOSURE
user manual
user manualuser manual
user manual
VERSIO 1.1
12XTI_UM_ML_1-1
w w w . l - a c o u s t i c s . c o m
6
66
6 en
4
44
4XT
XTXT
XTi
ii
i ARCHITECTURAL SERIES
ARCHITECTURAL SERIESARCHITECTURAL SERIES
ARCHITECTURAL SERIES
The L-ACOUSTICS
®
12XTi enclosure is the mid-sized model within the XTi Architectural Series and operates
over the 55 Hz to 20 kHz frequency bandwidth. This response can be e tended down to 32 Hz with the addition of the
L-ACOUSTICS
®
SB18i subwoofer.
The system approach developed by L-ACOUSTICS
®
for the XTi series consists of the elements needed to fully take
advantage of the possible configurations and optimize the system. The main components of the system are (see also
Figure 1):
8XTi *  Passive compact coa ial enclosure
12XTi *  Passive multipurpose coa ial enclosure
ETR8XTi *  Mounting accessory for the 8XTi enclosure
ETR12XTi *  Mounting accessory for the 12XTi enclosure
EMBi *  Pole mount socket for the 8XTi and 12XTi enclosures
SB18i  Subwoofer enclosure
LA4 / LA4X  Amplified controller
LA NETWORK MANAGER  Remote control software
SOUNDVISION  Acoustical and mechanical modeling software
* Available in two standard colors: Grey Brown RAL 8019
®
or Pure White RAL 9010
®
(refer to the 8XTi and 12XTi spec sheets).
The XTi series components are compatible with standard L-ACOUSTICS
®
accessories. These accessories include the
L-ACOUSTICS
®
SP.7, SP10, and SP25 loudspeaker cables with respective lengths of 0.7 m/2 ft,
10 m/30 ft, and 25 m/80 ft. These cables allow connection of the 8XTi and 12XTi enclosures to the LA4 / LA4X
amplified controller. Each cable is a 4-conductor cable with 4 mm
2
conductor cross-section (13 SWG, 11 AWG) and
features
4-point Speakon
®
connectors.
The 8XTi and 12XTi are driven and powered by the L-ACOUSTICS
®
LA4 / LA4X amplified controller. These
controllers ensure intelligent protection, filtering, and equalization of the enclosures. Four channels of amplification are
provided along with the OEM factory preset libraries, ensuring the optimization and performance of the systems within
the limits of the recommended configurations.
Each system design configuration should first be modeled and studied using the L-ACOUSTICS
®
SOUNDVISION
software. The software predictions are based on the preset parameters stored in the amplified controllers.
Up to 253 amplified controllers can be interconnected and monitored through the proprietary L-ACOUSTICS
®
L-NET network using the L-ACOUSTICS
®
LA NETWORK MANAGER software.
Detailed description on using the LA4 / LA4X amplified controller, SOUNDVISION and LA NETWORK MANAGER
softwares is beyond the scope of this manual. Please, refer to the appropriate documentation available on the
L-ACOUSTICS
®
web site at www.l-acoustics.com.

12XTI_UM_ML_1-1
w w w . l - a c o u s t i c s . c o m
7
77
7 en
EN
Figure 1: XTi series com onents
12XTi
8XTi
ETR8XTi
ETR12XTi
EMBi
SB18i
SOUNDVISION
LA NETWORK MANAGER
LA4
SP10
SP.7
SP25
LA4X

12XT
12XT12XT
12XT i COAXIAL E CLOSURE
COAXIAL E CLOSURECOAXIAL E CLOSURE
COAXIAL E CLOSURE
user manual
user manualuser manual
user manual
VERSIO 1.1
12XTI_UM_ML_1-1
w w w . l - a c o u s t i c s . c o m
8
88
8 en
5
55
512
1212
12XT
XTXT
XTi
ii
i COAXIAL E CLOSURE
COAXIAL E CLOSURECOAXIAL E CLOSURE
COAXIAL E CLOSURE
The L-ACOUSTICS
®
12XTi enclosure contains a 3’’ diaphragm compression driver coa ially loaded (for HF
directivity control) by an 12’’ low frequency transducer mounted in a bass-refle tuned enclosure. The internal passive
crossover network uses proprietary third order filters. The linearization and protection of the transducers is defined by
the drive parameters contained in the LA4 / LA4X amplified controller. The nominal impedance of the 12XTi enclosure
is
8 ohms.
The coa ial transducer arrangement produces a 90° a i-symmetric directivity output along with a smooth tonal
response free of secondary lobes over the entire frequency range.
The wedge-shaped cabinet design makes the 12XTi perfectly suited to all stacked sound reinforcement applications.
The cabinet can also be pole, wall, or ceiling-mounted.
The 12XTi cabinet is made of high grade Baltic birch plywood with remarkable mechanical and acoustical properties for
improved long term durability.
Figure 2: The 12XTi enclosure
4 inserts with screws
(OMNIMOUNT
®
)
Grill
Wedge-sha ed cabinetry Safety insert
Connector late
2
inserts with screws
(ETR12XTi or EMBi)

12XTI_UM_ML_1-1
w w w . l - a c o u s t i c s . c o m
9
99
9 en
EN
6
66
6I STALLATIO
I STALLATIOI STALLATIO
I STALLATIO
6.1 Flying or stacking the 12XTi
The inserts and the wedge-shaped cabinet design of the 12XTi enclosure (Figure 2) allow various setups such as:
•
••
•Wall or ceiling-mounting using the L-ACOUSTICS
®
ETR12XTi mounting accessory.
•
••
•Wall or ceiling-mounting using the OMNIMOUNT
®
120.0 SERIES mounting accessories.
•
••
•Pole mounting using the L-ACOUSTICS
®
EMBi 35 mm/1.4 inch socket.
•
••
•Stacking with two fi ed angle settings of 30° and 60° with regard to the vertical.
Refer to the “XTi’’ rigging rocedures manual before installing an enclosure.
6.2 Connecting s eakers
The 12XTi enclosure is driven and powered by the dedicated L-ACOUSTICS
®
LA4 / LA4X amplified controller.
Each LA4 / LA4X amp channel can drive one 12XTi enclosure. For more details, please, refer to the “LA4 / LA4X’’
user manual also available on the L-ACOUSTICS
®
web site at www.l-acoustics.com.
The 12XTi enclosure is equipped with 4-point Speakon
®
connectors allowing connection with the LA4 / LA4X
amplified controller using one of the L-ACOUSTICS
®
SP.7, SP10, or SP25 cables (see Figure 1 and Figure 3).
A ma imum of one 12XTi enclosure can be connected per LA4 / LA4X out ut channel.
The L-ACOUSTICS
®
wiring convention is as follows:
S eakon
®
connector labels
Connection to transducers
1+ IN +
1- IN -
2+ Not used
2- Not used
!
CAUTION
!
WARNING