LAIA T-JOY-IP User manual

Copyright © 2020 Laia · www.laiatech.com All rights reserved
Statement
The purpose of this section is to ensure that users can use the product
correctly through this manual to avoid operation.
Danger or property damage. Please read the product manual carefully
and keep it for future reference before using this product.
Preface
The control keyboard is an indispensable device in the integrated monitoring
system. All the front-end fastball, pan/tilt and electric lens can be controlled
by the control keyboard. The operation is simple and convenient. The control
keyboard also has a liquid crystal display for displaying working status and
interactive information.
Packing List
1 x IP Control Keyboard
1 x Power Adapter

Copyright © 2020 Laia · www.laiatech.com All rights reserved
Before you read
1.
What is the role of CAM NUM when adding a network device?
CAM NUM will be bound to the currently input IP and port information.
The CAM NUM set when the device is added by the [CAM] key can be
quickly switched to the device bound to the CAM NUM.
2.
How to input English when entering user name, password, and
custom F1 and F2 functions?
For example, to enter the letter C, simply press the number key [2] three
times on the input interface.
3.
How do you operate when you enter an IP address?
Because the keyboard does not have a "." button, it is divided into four
segments when inputting the IP, for example, to input 192.168.0.1, after
inputting 192, 168, it will automatically jump to the next input. When
inputting 0, you need to use the joystick "right" to switch to the next input.
4 How to clear in input mode?
The input can be cleared by the joystick "Left".
5. The main interface of each mode refers to the interface displayed after
the keyboard initialization is completed. In the IP VISCA. ONVIF mode,
there is a display of "VISCA I" or "ONVIF".
The IP address on the screen is the keyboard local IP. If there is “VISCA:”
or the IP address on the "ONVIF:" screen is the IP of the connected device.

Copyright © 2020 Laia · www.laiatech.com All rights reserved
1.
Product Description
1.1
Features
Four control modes (two network two analog)
Support three control protocols (VISCA, ONVIF, PELCO)
1.2
Connection Diagram
The keyboard and the dome are connected in the same LAN, and the network
segment where the IP address is located is consistent. For example,
192.168.1.123 and 192.168.1.111 belong to the same network segment;
192.168.1.123 and 192.168.0.125 is not on the same network segment. In this
case, you need to modify the IP address of the keyboard or dome. The default
IP acquisition method of the keyboard is dynamically obtained (DHCP).

Copyright © 2020 Laia · www.laiatech.com All rights reserved
1.3
Control Keyboard Parameters
Ethernet 1 Ethernet port
Rocker Function Four-dimensional (control: up, down, left, right)
rocker buttons and zoom function
Interface Mode Lead mode
Display Method
LCD
Beep Button sound prompt on/off
Working Power
DC 12V 1A ± 10% inside and outside negative
Power Consumption
0.6W max
Operating Temperature
0
C
~50
C
Storage Temperature
-20
C
~70
C
Physical Dimension
320*180*100

Copyright © 2020 Laia · www.laiatech.com All rights reserved
2.
Keyboard Function Description
2.1
Key Description
WB AUTO
Auto white balance button: Set the camera to auto white
balance mode. This button will light when the camera is in
manual white balance mode.
FOCUS AUTO
Auto Focus button: Design the camera to be in auto focus
mode. This case will light up when the camera is in
manual focus mode.
AE AUTO
Auto Iris button: Set the camera to auto iris mode. This
button will light when the camera is in manual iris mode.
HOME Camera returns to the origin.
CAM1 ~ CAM4
Quickly switch device keys: quickly switch to devices with
CAM NUM 1-4 (ONVIF, IP VISCA) or switch to address
code 1-4 (VISCA, PELCO).
ESC / ENTER Return and confirm key

Copyright © 2020 Laia · www.laiatech.com All rights reserved
SETUP Keyboard local settings button: modify, view keyboard
local settings
INQUIRE Query key: query and added device
ADD DEVICE Manually add network device keys; manually add network
devices (only ONVIF, IP VISCA mode support)
NEAR Manual adjustment of near focus
FAR Manual adjustment of far focus
BACKLIGHT ON Turn on the backlight
BACKLIGHT OFF Turn off the backlight
MENU NO Menu open
MENU OFF Menu closed
MENU ENTER Enter menu
MENU BACK Exit submenu
CAM
The CAM NUM set when IP VISCA or ONVIF mode input
device is added can be quickly switched to the device
bound to the CAM NUM. In VISICA or PELCO, the input
address code switching needs to be used with the numeric
keys and the [ENTER] key.
SAVE PRESET Set preset button: This function should be used together
with the number keys and [ENTER] key.
CALL PRESET Call preset button: This function should be used together
with the number key and [ENTER] key.
DELETE PRESET
Delete preset button: This function should be used
together with the number key and [ENTER] key.
1 ~ 9
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 (2468 can also be a direction
button to control the pan/tilt or movement menu).

Copyright © 2020 Laia · www.laiatech.com All rights reserved
2.2
Rocker switch, knob
NEAR / FAR Manually adjust the focus, NEAR (fixed focus) / FAR (far
focus).
OPEN / CLOSE Manually adjust the aperture, OPEN (aperture plus) /
CLOSED (aperture reduction).
R- / R+ Manually adjust the red gain
B- / B+ Manually adjust the blue gain
PTZ SPEED +
PTZ SPEED -
Adjust PTZ speed, 1 (slow) -8 (fast) gear
T-ZOOM-W
The lens zooms in/out, the T lens magnification increases,
and the W lens magnification decreases.

Copyright © 2020 Laia · www.laiatech.com All rights reserved
2.3
Rocker Control
(clockwise/counterclockwise rotation is only valid for 3D)
2.4
Control keyboard rear interface terminal description
Back panel: There is a 5PIN crimp terminal interface, an RS232
interface, a DC-12V power plug, a USB interface, and a network port,
as shown in the figure:
2.5
Function number description
No. Mark Physical interface
Description
1
RS422
Control output (Ta,
Ta, Ra, Rb)
Connect the RS422 bus of the camera; (TA) to the
camera (RA), (TB) to the camera (RB), (RA) to the
camera (TA), (RB) to the camera (TB).
2
Ground
Control signal line
ground (G)
Control signal line ground

Copyright © 2020 Laia · www.laiatech.com All rights reserved
3
Ethernet Network port
Network data connection
4USB USB interface
Connect to WIFI
5
DC 12V Power input
DC power input
6
POWER Switch
Start off the power
3.
Keyboard local settings (SETUP button)
3.1
Basic options
(Through the mast up and down can switch from setting option 1 to 2, 2 to 3,
from the left and right of the joystick can be switched from button sound to
off (ENTER key confirmation):
(1) Delete device
(2) Network type (dynamic, static)
(3) Button sound (on, off)
(4) System language (Chinese, English)
(5)
Mode (VISCA, IP VISCA, ONVIF, PELCO)
(6) Native IP
(7) Version Number
(8) Restore Factory Settings
3.2
VISCA, IP VISCA mode settings have a total of options:
1. F1 (function of custom F1 button (VISCA command))
2.
F2 (function of custom F2 button (VISCA command))
First enter the custom name->ENTER->Enter VISCA command.
For example, if the command to be entered is 81 01 040702 FF,
enter 01040702 (Note: 0 cannot be omitted).

Copyright © 2020 Laia · www.laiatech.com All rights reserved
3.3
IP VISCA mode setting options
Delete saved device
Browse the device up and down through the joystick, browse the device port
through the mast, and browse the device IP, CAM NUM, ENTER button to
delete the selected device.
3.4
VISCA mode setting options
Control settings (set the baud rate of an address code)
The joystick switches the address up and down (0~255, all sets the address
1-7 at the same time) -> ENTER -> Joint switch left and right to switch the
baud rate
-> ENTER.
For example: check the address: 1-> ENTER-> select the baud rate: 9600->
ENTER, when the keyboard switches to address 1, the control baud rate is
9600.
3.5
PELCO mode setting options
Control settings (set the baud rate of an address code)
The joystick switches the address up and down (1-255, all sets the address 1-
255 at the same time) -> ENTER-> rocker left and right switching protocol ->
ENTER-> rocker left and right to switch the baud rate -> ENTER.
For example: selected address: 1-> ENTER-> selected protocol:
PELCO-D-> ENTER-> selected baud rate: 9600-> ENTER, when the
keyboard is switched to address 1, the control baud rate is 9600, the
protocol is PELCO-D.
3.6
ONVIF mode setting options
Delete saved device
Browse the device up and down through the joystick, browse the device
port through the joystick, and browse the device IP, CAM NUM, ENTER

Copyright © 2020 Laia · www.laiatech.com All rights reserved
button to delete the selected device.
4.
Keyboard connection and control device
4.1
Connection and control in ONVIF mode
Need to add manually
In ONVIF mode, the operation of adding a LAN device using the keyboard is as
follows:
1.
Press the keyboard settings button.
2.
Choose ADD DEVICE.
3.
Enter the IP, port, user name, password, and channel number of
the video conference camera.
4.
After the input is complete, return to the settings interface and
select INQUIRE DEVICES.
5.
Select the device you just added and press ENTER to connect the device.
Login successfully displayed XXX.XXX.XXX.XXX.
Note: Enter the keyboard in any input state for confirmation, the joystick to
the left is BACKSPACE or DELETE.
4.2
Connection and Control in IP VISCA Mode
Search is not supported in IP VISCA mode, only by manually adding devices.
1.
Manually add devices via the [IP] key.
2.
After adding the device, press the “INQUIRE” button to view the added
device, and the joystick “Up” and “Down”. View the saved device (the
joystick “Right” can view the port), press the “ENTER” button to select the
camera you want to control or use the [CAM] button to connect and control.
4.3
VISCA, control in PELCO mode
Just set the address code and baud rate to control, PELCO also needs
to set PELCO-D or PELCO-P protocol.

Copyright © 2020 Laia · www.laiatech.com All rights reserved
5.
WEB side configuration
5.1
Home
1.
The keyboard is connected to the same LAN as the computer (by
default, the Keyboard IP is obtained by DHCP), and the IP
address of the keyboard is entered in the browser.
2.
Default username: admin; password: empty.
3.
After entering the device web client, the page is displayed as follows.
4.
After entering the device home page, the three lists are: search
device list (green box); device list (blue box) added; device details
(orange frame); manual addition (yellow box).
5.
Click "Search" to search for ONVIF devices in the LAN. After the
search is completed, it will be automatically displayed in the green
box.
6.
Select the device you want to add in the "Search Device List", click
"Add", click "Ctrl" to select more.
7.
Select the device you want to delete in "Added device list", click
"Delete", click "Ctrl" to select more.

Copyright © 2020 Laia · www.laiatech.com All rights reserved
8.
After adding a device, click the device IP in the blue box to edit the
account and port information of the device.
9.
After adding, deleting, and modifying, you need to click "Save".
Ps: After changing the configuration parameters of the home page, you must
click save, otherwise the change data will not be modified.
5.2
LAN Settings
The LAN settings can modify the IP acquisition mode and port parameters of the
device, as shown in the following figure:
Dynamic address (default access method): the keyboard will automatically
request an IP address from the router.
Static address: When you need to set the network segment by yourself,
change the network type to a static address and fill in the network
segment information to be modified.
5.3
Upgrade
The upgrade function is used as the maintenance and update keyboard
function. After entering the upgrade page, select the correct upgrade file,

Copyright © 2020 Laia · www.laiatech.com All rights reserved
click “Start”, and the device will restart automatically after the upgrade.
Ps: Do not perform any operations on the device during the upgrade process.
Do not power off or disconnect the network.
5.4
Restore Default
When the device appears to be unable to work properly due to modification
of some configurations, this function can be used to restore the device to
factory defaults. Please use with caution when the equipment is working
properly!
5.5
Restart
When the device needs to be restarted after a long time running, click
Restart to achieve the purpose of restarting maintenance.
Table of contents