Lance Lab TC 1 Standard User manual
Quick Start Guide: TC 1 Standard
1 m Snake Camera
TM
Reference Description
1 Power Button / Camera Button
2 Video Record Button
3 Rewind Button (menu back)
4 Fast Forward Button (menu forward)
5 ESC Button
6 Ok/ Enter Button
7 Micro SD® Card Slot
8 Speaker (Not in use with TC 1)
9 Microphone (Not supplied with TC 1)
10 Video Feed Connector (AV/ in)
11 Charging Indicator
12 System Status Indicator
13 AV Output (AV/ out)
14 USB Port
15 Mode Switch (“Q” standby / “N” On)
Mini DVR Controls
Top View
Front View
Side View
LCD Display
To turn on Mini DVR, ensure the mode switch (standby) is set
to position “N”, the power button must be then be held for 10
seconds until the blue light illuminates and the screen turns on.
TC 1 Lance Assembly Guide
Lance Lab Ltd™ ∙ C2 Strangford Business Park ∙ Ards Business Centre
Jubilee Road ∙ Newtownards ∙ County Down ∙ BT23 4YH ∙ United Kingdom (15.05.15)
TC 1 Mini DVR Setup Guide
To begin a recording simply press the
record button on the Mini DVR when the live
video feed can be seen. Press ESC to end
the recording. To take a photograph simply
press the power button once (allow 5 seconds
between photo’s).
Further guidance on using the Mini
DVR system correctly is provided in the
TC 1 operating manual and online at
www.lancelab.com.
© 2014 Lance Lab Ltd™
Please observe the safety information provided in the TC 1 operating
manual to avoid injury, loss of life and damaged equipment.
DO NOT SUBMERGE THE CAMERA
HEAD IN LIQUID / WATER.
ENSURE YOUR TC 1 IS STORED
APPROPRIATELY TO AVOID DAMAGE.
TM
Quick Start Guide: TC 1 Standard
1 m Snake Camera
Lance Lab Ltd™ ∙ C2 Strangford Business Park ∙ Ards Business Centre
Jubilee Road ∙ Newtownards ∙ County Down ∙ BT23 4YH ∙ United Kingdom (15.05.15)
© 2014 Lance Lab Ltd™
Please observe the safety information provided in the TC 1 operating
manual to avoid injury, loss of life and damaged equipment.
Transferring Files to a PC
1. Ensure the battery and required Micro SD® card are tted in to the Mini DVR.
2. Turn the PC on.
3. Connect the Mini DVR to the USB socket of a PC using the supplied cable. Do not use extension cables or USB
hubs as the Mini DVR may not communicate correctly with the PC. Ensure the USB cable is pushed rmly into both
sockets.
4. No drivers should be required in order to access the les on the Micro SD® card, locate the drive and drag and drop
les into the required directory.
5. Delete the les stored on the Micro SD® card to free space for further recordings and unplug USB cable once
communications complete.
Do not format the Micro SD® card on the PC.
Do not disconnect the USB cable or change Micro SD® card when the Mini DVR is communicating
with the PC. If the cable is disconnected during communication data loss will be caused.
Charging the Mini DVR
Battery type: Rechargeable 3.7 V Li - Ion
Additional Information
* TC 1 Standard is supplied with the TC 1 lance only. Mini DVR and accessories are included with
the TC 1 Deluxe only.
