Land Pride RCM5020 Series User manual

105
Rotary Cutters, Folding Deck
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
RC5020 and RCM5020 Series
RC5020 & RCM5020
Min. PTO Horse Power 70
Gear Box Horsepower 250 HP Splitter
210 HP Center & wing
Gear Box Lubrication Gear Lube 80-90W EP
Cutting Capacity Up To 3" Material
Machine Weight 6,528 lbs. Approx.
(With single row chain guards, 6 laminated tires, dual axle, 540 CV main driveline)
Blade Tip Speed @ 540 RPM Center blade: 17,377 FPM
Wing blade: 17,329 FPM
@1000 RPM Center blade: 18,165 FPM
Wing blade:18,317 FPM
Tongue Weight 2300 lbs.
Hitch Jack Standard hand crank
Hitch Type Pull-Type, Self-Leveling Hitch & Clevis
Cutting Width
Overall Width
Minimum Transport Width
20’-0”
20’-9 1/2”
8’-9”
Overall Length 19’-3”
Deck Height 10 1/2”
Cutting Height 2” to 14” High with hydraulic cylinder and stroke control spacers
Deck Material Thickness 3/16”
Side Skirt Thickness 1/4”
Skid Shoes Wing and Weight Box: Reversible & replaceable
Center Deck: 2 - Replaceable
Blades - 6 (2 per Carrier) 1/2” x 4” Thru-harden free swinging alloy steel with uplift
Blade Overlap 6”
Blade Bolt Keyed with hardened flat washer & lock nut
3/16” Stump Jumper 3/16” Round dish shaped bolt-on stump-jumper with 1” diamond shaped blade bar
Deck Ring Optional 1/2” x 3” fully welded
Front & Rear Guards Optional rubber, single chain or double chain
Heavy Duty
Input Driveline Options Conventional u-joint ASAE Category 5 with 1 3/8”-21 spline Constant velocity u-joint ASAE Category 5 with 1 3/8”-21 spline or 1 3/4”-20 spline
Heavy Duty
Connecting Drivelines ASAE Cat. 5 with slip-clutch protection
Tire Options 6” x 21” Laminated tires
or 27” x 7.75” x 15” Used aircraft tires w/wo foam filling
or 15” Rims
Wheel Options 6 or 8 Wheels
Transport Axle Spring-cushioned on center transport axle
Hubs Cast iron 5-bolt hubs with tapered roller bearings and with 1 3/4” shafts
Shredder Blades (optional) Cuts material into smaller pieces
Colors Standard color: Beige
Optional colors: Green or Red
318-474S continue on next page 02/03/09

106
Rotary Cutters, Folding Deck
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
26843
26841
20’-9 1/2”
19’-3”
3’-6 1/8”
9’-9 3/4”
8’-9”
At 2” Cutting Height
10’-9”
Transport Width With Wing Axles Disconnected
At The Turnbuckles And Wheels Folded Back Transport Width With Wing Axles Connected At The Turnbuckles
- RC5020 & RCM5020
318-474S end 02/03/09