
•7/32”,3/16”and5/32”Allenheadwrenches
•Flatbladescrewdriver
Forinstallingumbrellatotableorstand:
•No.2Phillipsscrewdriver
•7/16”wrenchoradjustablewrench
•Properpersonnelforliftingumbrella–weightisapproximately80lbs.
ToolsRequired
ASSEMBLEWITHCARE! Pangard IIPolyesterPowdercoat isastrong,long‐lastingfinish.Toprotect
thisfinishduringassembly,placeunwrappedpowdercoated partsonpackagingfoamorothernon‐
marringsurface.Donotplaceorslidepowdercoated partsonconcreteorotherhardortextured
surface– thiswilldamagethefinishcausingrusttooccur.Usetouch‐uppaintonanygougesinthe
finishcausedbyassemblytools.
Altair
WARNING:SOLSTICEUMBRELLAMUST BEUSEDWITHSURFACE
MOUNTEDOREMBEDDEDTABLEORSURFACEMOUNTSTAND.
NOTE:IfspecifyingaSolsticeumbrellawithLandscapeForms’Charliepicnictables,the
surfacemountstandmustalsobespecified.ForallotherLandscapeFormstablesorpicnic
tables,theumbrellasecurestothetableandnostandisrequired.Thehardwarefor
securingtheumbrellatothetableorstandisshippedwiththesupport.
Seeseparateinstallationguidesforsurfacemountstandortable.
Storage:ItisrecommendedtoleavetheSolsticeunitinstalledallyear.Iftheunitmustbe
stored,removefromtableorstand.Replacetheboltinthetableorstand.Loosentopcap
centerscrewandremovepolefromcanopyassembly.Replacescrewintopofpole.
Cygnus
Includedcomponents
1x‐ Topcap
8x‐ strut
8x‐ panel
1x–Strutring
Altair Cygnus
1x‐ Pole
1x–3/8‐16x1‐1/4”
screw
16x–5/16‐18x1”
screw
8x–#10‐24x1‐1/4”
screw
8x–endcapnut
PROCEDUREFORINSTALLATION:
Note:Donotfullytightenanyhardwareuntiltheunitiscompletelyassembled.As
hardwareisinstalled,tightenuntiljustsnug,thenloosen1/2turn.Onceunitisassembled,
allhardwarecanbefullytightened.
Assembleumbrellaonanon‐marringsurface.Sufficientoverheadclearancemustbe
availablebeforeyoubegin.Avoidlowhangingpowerlines.
1. Installandanchortableorsurfacemountstandaccordingtoinstallationguides.
2. Installstrutringonpole.SeeFig.1.
3. Installthetopcapwiththe3/8‐16x1‐1/4”socketbuttonheadcapscrew.SeeFig.2.
4. Attachtwostrutstostrutring.SeeFigs3aand3b.
5. Installonepanelbetweenthetwostruts.Fitholesinendcapsoveralignmentpinat
theendofeachstrut.Bolttotopring.SeeFigs4a,4band4c.
6. Attachnextstrut,workinginacounter‐clockwisedirectionwhenlookingatthetopof
theumbrella.SeeFig5.
7. Installnextpanelbyrepeatingstep5.Bolttogetherthepanelendcapsusingthe#10‐
24screwandendcapnut.Leave1/8”gapbetweenendcaps.SeeFig.6.
8. Rotateumbrellasothatsecondinstalledpanelisinthe6o’clockposition.SeeFig.7.
9. Repeatuntilallpanelsandstrutsareinstalled.Ifitisdifficulttoconnectthefinalend
caps,relievestressbyadjustingthetopofthepanelconnection.Checktoensurethat
allendcaps have1/8”gap.
10. Onceunitisfullyassembled,tightenallhardware.Donotovertighten.Tightenend
caphardwarefirst,strutringhardwaresecond,topringhardwarethirdandthenthe
topcapcenterscrew.
11. Liftassembledumbrellaintoholeintableorsurfacemountstand,takingcarenotto
scratchthetabletop.
12. Turnumbrellatoalignholesinsupportandpole.Insert1/4‐20boltthroughholesand
installlocknut.Thishardwareisshippedwiththetablesupportorsurfacemount
stand.Thesurfacemountstandhastwoscrewsandlocknuts.
Installation Guide
Solstice: Altair, Cygnus Umbrella
www.landscapeforms.com Ph: 800.521.2546
Date: June 17, 2016
Page 1 of 2