Laser 7925 User manual

www.lasertools.co.uk
Part No. 7925
Heavy Duty Folding Engine Stand
680kg Capacity
Instructions
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
680kg Capacity
680kg Capacity
680kg Capacity
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Instructions
Instructions
Instructions
Instructions
Instructions
680kg Capacity
680kg Capacity
Heavy Duty Folding Engine Stand
680kg Capacity
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Instructions
Instructions
Instructions
680kg Capacity
680kg Capacity
Heavy Duty Folding Engine Stand
680kg Capacity
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Instructions
Instructions
Instructions
680kg Capacity
680kg Capacity
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Part No. 7925
Part No. 7925
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Part No. 7925
Part No. 7925
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Part No. 7925
Part No. 7925
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
Heavy Duty Folding Engine Stand
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk

25
27
24
26 22 23
78
9
28
1
5
78
9
15 14
77 6
8
89
9
20
19
11,12,13
8
7
9
29 7,8,9
18
4
29
5
63
21
1617
10
Fig 1
2
2
www.lasertools.co.uk
Instructions (Assembly & Safety)
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
mobility on smooth, flat surfaces.
Assembly Instructions:
Refer to Figure 1 and
table of items included:
1) Attach wheel 14 to rear leg 2with bolt 15, spring washer 17 and nut 16.
2) Attach caster 19 to mast assembly 1with washer 9, spring washer 8and nut 7.
3) Attach mast assembly 1to the rear leg 2with bolts 5& 6, washers 9, spring
washers 8and nuts 7.
4) Remove the caps 29 from the front leg 4, attach casters 18 to the front leg with
washer 9, spring washer 8and nut 7. Replace the caps 29 back into the front leg.
5) Attach crossmember 3to the front leg 4with bolts 5& 6, washers 9, spring
washers 8and nuts 7.
6) Fasten the mast assembly 1to the crossmember 3with bolts 10, washers 13,
spring washers 12 and nuts 11. Lift one side of the mast assembly to align the
hole in the frame to the hole in the crossmember, then insert the pin 20 into
this hole, and insert the spring clip 21 into the hole in the pin.
6) Attach the mounting head 22 to the mounting adaptor 23 with bolt 24, washer
9, spring washer 8and nut 7.
7) Insert mounting head 22 into the hole at the top of the mast assembly. Line up
the hole in the mounting head with the corresponding hole in the
mast assembly, then secure with the head locking pin 25.
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
This engine stand is used to mount engines or transmissions when they have been removed
Instructions (Assembly & Safety)
Instructions (Assembly & Safety)
mobility on smooth, flat surfaces.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
Instructions (Assembly & Safety)
This engine stand is used to mount engines or transmissions when they have been removed
Instructions (Assembly & Safety)
Instructions (Assembly & Safety)
Refer to Figure 1 and
table of items included:
Refer to Figure 1 and
Assembly Instructions:
mobility on smooth, flat surfaces.
Assembly Instructions:
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
mobility on smooth, flat surfaces.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
This engine stand is used to mount engines or transmissions when they have been removed
Instructions (Assembly & Safety)
Instructions (Assembly & Safety)
table of items included:
Refer to Figure 1 and
table of items included:
Refer to Figure 1 and
Assembly Instructions:
mobility on smooth, flat surfaces.
Assembly Instructions:
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
mobility on smooth, flat surfaces.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
This engine stand is used to mount engines or transmissions when they have been removed
Instructions (Assembly & Safety)
Instructions (Assembly & Safety)
table of items included:
Refer to Figure 1 and
table of items included:
Refer to Figure 1 and
Assembly Instructions:
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
mobility on smooth, flat surfaces.
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
mobility on smooth, flat surfaces.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
This engine stand is used to mount engines or transmissions when they have been removed
Instructions (Assembly & Safety)
Instructions (Assembly & Safety)
table of items included:
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
Instructions (Assembly & Safety)
This engine stand is used to mount engines or transmissions when they have been removed
Instructions (Assembly & Safety)
Instructions (Assembly & Safety)
Instructions (Assembly & Safety)
27
26
26
25
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
This engine stand is used to mount engines or transmissions when they have been removed
This engine stand is used to mount engines or transmissions when they have been removed
28
24
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
This engine stand is used to mount engines or transmissions when they have been removed
1)
78
78
5
9
22 23
22 23
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
This engine stand is used to mount engines or transmissions when they have been removed
3)
3)
Attach mast assembly
Attach wheel
Attach caster
Attach wheel
Attach caster
Attach wheel
15 14
15 14
15 14
16
16
17
78
78
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
This engine stand is used to mount engines or transmissions when they have been removed
5)
washer
Remove the caps
washer
washers
Remove the caps
Attach mast assembly
washers
Attach mast assembly
Attach caster
Attach wheel
Attach caster
Attach wheel
14
Fig 1
Fig 1
6
8
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
The stand incorporates a locking, rotating, mounting head so that the operator can rotate
This engine stand is used to mount engines or transmissions when they have been removed
from the vehicle. It is designed to provide access to the units for servicing and/or rebuilding.
6)
Fasten the mast assembly
spring washers
washers
Fasten the mast assembly
Attach crossmember
washers
Attach crossmember
washer
9
Attach crossmember
8
and nuts
Remove the caps
and nuts
Remove the caps
Attach mast assembly
and nuts
Attach mast assembly
to mast assembly
Attach mast assembly
to rear leg
to mast assembly
to rear leg
19
11,12,13
89
89
89
89
89
7
the unit for ease of access. The stand also incorporates wheels and lockable casters to allow
6)
this hole, and insert the spring clip
6)
Attach the mounting head
hole in the frame to the hole in the crossmember, then insert the pin
this hole, and insert the spring clip
spring washers
hole in the frame to the hole in the crossmember, then insert the pin
Fasten the mast assembly
spring washers
Fasten the mast assembly
spring washers
8
and nuts
Fasten the mast assembly
Attach crossmember
and nuts
, spring washer
Attach crossmember
, spring washer
29
, spring washer
and nuts
7
29
from the front leg
7
.
to mast assembly
1
to the rear leg
to mast assembly
2
with bolt
to mast assembly
with bolt
29
7
5
7)
7)
7)
Insert mounting head
the hole in the mounting head with the corresponding hole in the
, spring washer
Insert mounting head
Attach the mounting head
, spring washer
Attach the mounting head
, spring washer
this hole, and insert the spring clip
Attach the mounting head
hole in the frame to the hole in the crossmember, then insert the pin
this hole, and insert the spring clip
spring washers
hole in the frame to the hole in the crossmember, then insert the pin
spring washers
12
Fasten the mast assembly
12
Attach crossmember
and nuts
Attach crossmember
3
7
, spring washer
3
to the front leg
, spring washer
8
from the front leg
8
and nut
from the front leg
to the rear leg
to mast assembly
to the rear leg
with bolt
to mast assembly
1
with washer
to the rear leg
with bolt
with washer
15
15
, spring washer
2
2
mast assembly, then secure with the head locking pin
mast assembly, then secure with the head locking pin
the hole in the mounting head with the corresponding hole in the
mast assembly, then secure with the head locking pin
the hole in the mounting head with the corresponding hole in the
mast assembly, then secure with the head locking pin
Insert mounting head
the hole in the mounting head with the corresponding hole in the
, spring washer
Insert mounting head
Attach the mounting head
, spring washer
Attach the mounting head
this hole, and insert the spring clip
Attach the mounting head
hole in the frame to the hole in the crossmember, then insert the pin
hole in the frame to the hole in the crossmember, then insert the pin
this hole, and insert the spring clip
and nuts
hole in the frame to the hole in the crossmember, then insert the pin
Fasten the mast assembly
and nuts
Fasten the mast assembly
1
to the crossmember
to the front leg
to the front leg
from the front leg
and nut
7
from the front leg
from the front leg
4
2
with bolts
with washer
with bolts
with washer
with washer
with bolts
, spring washer
with washer
, spring washer
7,8,9
4
mast assembly, then secure with the head locking pin
mast assembly, then secure with the head locking pin
the hole in the mounting head with the corresponding hole in the
mast assembly, then secure with the head locking pin
Insert mounting head
the hole in the mounting head with the corresponding hole in the
8
and nut
Insert mounting head
Attach the mounting head
and nut
Attach the mounting head
this hole, and insert the spring clip
Attach the mounting head
hole in the frame to the hole in the crossmember, then insert the pin
this hole, and insert the spring clip
11
hole in the frame to the hole in the crossmember, then insert the pin
11
. Lift one side of the mast assembly to align the
to the crossmember
. Lift one side of the mast assembly to align the
to the crossmember
to the front leg
4
. Replace the caps
4
with bolts
, attach casters
. Replace the caps
, attach casters
. Replace the caps
, attach casters
with bolts
with bolts
with washer
9
, spring washer
with bolts
5
&
, spring washer
, spring washer
, spring washer
17
18
mast assembly, then secure with the head locking pin
the hole in the mounting head with the corresponding hole in the
mast assembly, then secure with the head locking pin
the hole in the mounting head with the corresponding hole in the
mast assembly, then secure with the head locking pin
22
into the hole at the top of the mast assembly. Line up
the hole in the mounting head with the corresponding hole in the
and nut
7
into the hole at the top of the mast assembly. Line up
to the mounting adaptor
7
.
this hole, and insert the spring clip
to the mounting adaptor
this hole, and insert the spring clip
21
to the mounting adaptor
hole in the frame to the hole in the crossmember, then insert the pin
21
. Lift one side of the mast assembly to align the
hole in the frame to the hole in the crossmember, then insert the pin
. Lift one side of the mast assembly to align the
hole in the frame to the hole in the crossmember, then insert the pin
to the crossmember
with bolts
. Replace the caps
with bolts
, attach casters
. Replace the caps
, attach casters
, attach casters
. Replace the caps
, attach casters
, attach casters
6
, washers
, spring washer
, washers
and nut
, spring washer
and nut
mast assembly, then secure with the head locking pin
the hole in the mounting head with the corresponding hole in the
mast assembly, then secure with the head locking pin
the hole in the mounting head with the corresponding hole in the
mast assembly, then secure with the head locking pin
into the hole at the top of the mast assembly. Line up
the hole in the mounting head with the corresponding hole in the
to the mounting adaptor
into the hole at the top of the mast assembly. Line up
to the mounting adaptor
to the mounting adaptor
into the hole in the pin.
to the mounting adaptor
hole in the frame to the hole in the crossmember, then insert the pin
into the hole in the pin.
. Lift one side of the mast assembly to align the
hole in the frame to the hole in the crossmember, then insert the pin
to the crossmember
3
. Lift one side of the mast assembly to align the
3
with bolts
. Lift one side of the mast assembly to align the
with bolts
&
6
. Replace the caps
6
, washers
29
back into the front leg.
, washers
18
to the front leg with
back into the front leg.
to the front leg with
, washers
, washers
9
, spring
8
and nut
9
, spring
16
.
and nut
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
mast assembly, then secure with the head locking pin
mast assembly, then secure with the head locking pin
into the hole at the top of the mast assembly. Line up
the hole in the mounting head with the corresponding hole in the
into the hole at the top of the mast assembly. Line up
the hole in the mounting head with the corresponding hole in the
into the hole at the top of the mast assembly. Line up
to the mounting adaptor
to the mounting adaptor
hole in the frame to the hole in the crossmember, then insert the pin
into the hole in the pin.
hole in the frame to the hole in the crossmember, then insert the pin
into the hole in the pin.
. Lift one side of the mast assembly to align the
hole in the frame to the hole in the crossmember, then insert the pin
with bolts
. Lift one side of the mast assembly to align the
with bolts
with bolts
, washers
10
, washers
back into the front leg.
, washers
9
to the front leg with
back into the front leg.
to the front leg with
, spring
, spring
and nut
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
mast assembly, then secure with the head locking pin
the hole in the mounting head with the corresponding hole in the
mast assembly, then secure with the head locking pin
the hole in the mounting head with the corresponding hole in the
into the hole at the top of the mast assembly. Line up
the hole in the mounting head with the corresponding hole in the
into the hole at the top of the mast assembly. Line up
to the mounting adaptor
23
into the hole in the pin.
23
with bolt
into the hole in the pin.
with bolt
hole in the frame to the hole in the crossmember, then insert the pin
. Lift one side of the mast assembly to align the
hole in the frame to the hole in the crossmember, then insert the pin
. Lift one side of the mast assembly to align the
. Lift one side of the mast assembly to align the
, washers
. Lift one side of the mast assembly to align the
, washers
, spring
, spring
back into the front leg.
, spring
to the front leg with
back into the front leg.
to the front leg with
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
mast assembly, then secure with the head locking pin
the hole in the mounting head with the corresponding hole in the
mast assembly, then secure with the head locking pin
25
the hole in the mounting head with the corresponding hole in the
25
into the hole at the top of the mast assembly. Line up
the hole in the mounting head with the corresponding hole in the
into the hole at the top of the mast assembly. Line up
with bolt
with bolt
24
24
hole in the frame to the hole in the crossmember, then insert the pin
hole in the frame to the hole in the crossmember, then insert the pin
. Lift one side of the mast assembly to align the
20
into
. Lift one side of the mast assembly to align the
into
, washers
. Lift one side of the mast assembly to align the
13
,
the hole in the mounting head with the corresponding hole in the
into the hole at the top of the mast assembly. Line up
the hole in the mounting head with the corresponding hole in the
into the hole at the top of the mast assembly. Line up
into the hole at the top of the mast assembly. Line up
, washer
, washer
, washer
, washer
into the hole at the top of the mast assembly. Line up
into the hole at the top of the mast assembly. Line up
into the hole at the top of the mast assembly. Line up
into the hole at the top of the mast assembly. Line up

3
www.lasertools.co.uk
Precautions
Operation
The following instructions are for guidance only.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
cannot be held responsible for any damage caused what so ever.
Before applying load:
• With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
bell housing mounting bolts (not supplied).
• Ensure that the load is centred and straight on the mounting head, then tighten the
mounting arms to the engine or gearbox.
• Now tighten the mounting arms to the mounting head.
• After making sure all connections are tight, slowly and carefully lower the hoist,
transferring the load to the stand.
To remove a load from the stand:
• Using a separate engine hoist attach the hoist to the load using a sling or similar
strapping device.
• After the hoist and sling are secure on the load, raise the hoist, taking the weight of
the load off the stand.
• The mounting bolts and fasteners and now be removed leaving the engine or gearbox
free of the stand.
The following instructions are for guidance only.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
The following instructions are for guidance only.
Precautions
Precautions
cannot be held responsible for any damage caused what so ever.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
cannot be held responsible for any damage caused what so ever.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
The following instructions are for guidance only.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
Precautions
The following instructions are for guidance only.
Precautions
Precautions
cannot be held responsible for any damage caused what so ever.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
cannot be held responsible for any damage caused what so ever.
The following instructions are for guidance only.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
The following instructions are for guidance only.
The following instructions are for guidance only.
Precautions
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
cannot be held responsible for any damage caused what so ever.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
cannot be held responsible for any damage caused what so ever.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
The following instructions are for guidance only.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
The following instructions are for guidance only.
cannot be held responsible for any damage caused what so ever.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
cannot be held responsible for any damage caused what so ever.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
cannot be held responsible for any damage caused what so ever.
The following instructions are for guidance only.
The following instructions are for guidance only.
Before applying load:
•
Before applying load:
Operation
Before applying load:
Operation
Operation
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
cannot be held responsible for any damage caused what so ever.
The following instructions are for guidance only.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
The following instructions are for guidance only.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
bell housing mounting bolts (not supplied).
Ensure that the load is centred and straight on the mounting head, then tighten the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
bell housing mounting bolts (not supplied).
Before applying load:
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
Before applying load:
Operation
Operation
Operation
Operation
cannot be held responsible for any damage caused what so ever.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
cannot be held responsible for any damage caused what so ever.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
•
After making sure all connections are tight,
Now tighten the mounting arms to the mounting head.
After making sure all connections are tight,
Ensure that the load is centred and straight on the mounting head, then tighten the
mounting arms to the engine or gearbox.
Ensure that the load is centred and straight on the mounting head, then tighten the
bell housing mounting bolts (not supplied).
Ensure that the load is centred and straight on the mounting head, then tighten the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
bell housing mounting bolts (not supplied).
Before applying load:
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
Before applying load:
Before applying load:
Before applying load:
cannot be held responsible for any damage caused what so ever.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
cannot be held responsible for any damage caused what so ever.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
cannot be held responsible for any damage caused what so ever.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
To remove a load from the stand:
•
To remove a load from the stand:
Using a separate engine hoist attach the hoist to the load using a sling or similar
To remove a load from the stand:
transferring the load to the stand.
transferring the load to the stand.
Now tighten the mounting arms to the mounting head.
After making sure all connections are tight,
mounting arms to the engine or gearbox.
Now tighten the mounting arms to the mounting head.
Ensure that the load is centred and straight on the mounting head, then tighten the
mounting arms to the engine or gearbox.
Now tighten the mounting arms to the mounting head.
bell housing mounting bolts (not supplied).
Ensure that the load is centred and straight on the mounting head, then tighten the
mounting arms to the engine or gearbox.
bell housing mounting bolts (not supplied).
Ensure that the load is centred and straight on the mounting head, then tighten the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
bell housing mounting bolts (not supplied).
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
bell housing mounting bolts (not supplied).
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
cannot be held responsible for any damage caused what so ever.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
•
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
the load off the stand.
strapping device.
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
Using a separate engine hoist attach the hoist to the load using a sling or similar
strapping device.
Using a separate engine hoist attach the hoist to the load using a sling or similar
To remove a load from the stand:
Using a separate engine hoist attach the hoist to the load using a sling or similar
To remove a load from the stand:
transferring the load to the stand.
After making sure all connections are tight,
transferring the load to the stand.
Now tighten the mounting arms to the mounting head.
After making sure all connections are tight,
mounting arms to the engine or gearbox.
Now tighten the mounting arms to the mounting head.
After making sure all connections are tight,
Ensure that the load is centred and straight on the mounting head, then tighten the
mounting arms to the engine or gearbox.
Ensure that the load is centred and straight on the mounting head, then tighten the
Ensure that the load is centred and straight on the mounting head, then tighten the
mounting arms to the engine or gearbox.
bell housing mounting bolts (not supplied).
Ensure that the load is centred and straight on the mounting head, then tighten the
mounting arms to the engine or gearbox.
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
bell housing mounting bolts (not supplied).
Ensure that the load is centred and straight on the mounting head, then tighten the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
bell housing mounting bolts (not supplied).
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
The use of this tool is purely down to the user’s discretion and The Tool Connection Ltd.
free of the stand.
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
free of the stand.
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
the load off the stand.
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
the load off the stand.
strapping device.
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
Using a separate engine hoist attach the hoist to the load using a sling or similar
strapping device.
Using a separate engine hoist attach the hoist to the load using a sling or similar
strapping device.
To remove a load from the stand:
Using a separate engine hoist attach the hoist to the load using a sling or similar
To remove a load from the stand:
transferring the load to the stand.
After making sure all connections are tight,
transferring the load to the stand.
Now tighten the mounting arms to the mounting head.
After making sure all connections are tight,
Now tighten the mounting arms to the mounting head.
Now tighten the mounting arms to the mounting head.
After making sure all connections are tight,
mounting arms to the engine or gearbox.
Now tighten the mounting arms to the mounting head.
Ensure that the load is centred and straight on the mounting head, then tighten the
mounting arms to the engine or gearbox.
bell housing mounting bolts (not supplied).
Ensure that the load is centred and straight on the mounting head, then tighten the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
bell housing mounting bolts (not supplied).
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
free of the stand.
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
free of the stand.
the load off the stand.
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
the load off the stand.
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
the load off the stand.
Using a separate engine hoist attach the hoist to the load using a sling or similar
Using a separate engine hoist attach the hoist to the load using a sling or similar
To remove a load from the stand:
Using a separate engine hoist attach the hoist to the load using a sling or similar
transferring the load to the stand.
To remove a load from the stand:
transferring the load to the stand.
After making sure all connections are tight,
After making sure all connections are tight,
Now tighten the mounting arms to the mounting head.
After making sure all connections are tight,
mounting arms to the engine or gearbox.
Now tighten the mounting arms to the mounting head.
Ensure that the load is centred and straight on the mounting head, then tighten the
Ensure that the load is centred and straight on the mounting head, then tighten the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
Using a separate engine hoist attach the hoist to the load using a sling or similar
Using a separate engine hoist attach the hoist to the load using a sling or similar
Using a separate engine hoist attach the hoist to the load using a sling or similar
slowly and carefully
Now tighten the mounting arms to the mounting head.
slowly and carefully
Now tighten the mounting arms to the mounting head.
Ensure that the load is centred and straight on the mounting head, then tighten the
Ensure that the load is centred and straight on the mounting head, then tighten the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
Using a separate engine hoist attach the hoist to the load using a sling or similar
Using a separate engine hoist attach the hoist to the load using a sling or similar
Using a separate engine hoist attach the hoist to the load using a sling or similar
Using a separate engine hoist attach the hoist to the load using a sling or similar
slowly and carefully
slowly and carefully
slowly and carefully
Ensure that the load is centred and straight on the mounting head, then tighten the
Ensure that the load is centred and straight on the mounting head, then tighten the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
Using a separate engine hoist attach the hoist to the load using a sling or similar
Using a separate engine hoist attach the hoist to the load using a sling or similar
slowly and carefully
slowly and carefully
lower the hoist,
slowly and carefully lower the hoist,slowly and carefully
lower the hoist,
Ensure that the load is centred and straight on the mounting head, then tighten the
Ensure that the load is centred and straight on the mounting head, then tighten the
Ensure that the load is centred and straight on the mounting head, then tighten the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
Using a separate engine hoist attach the hoist to the load using a sling or similar
Using a separate engine hoist attach the hoist to the load using a sling or similar
lower the hoist,
lower the hoist,
Ensure that the load is centred and straight on the mounting head, then tighten the
Ensure that the load is centred and straight on the mounting head, then tighten the
With the mounting arms loose, bolt them to the rear of the engine or gearbox using the
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
Using a separate engine hoist attach the hoist to the load using a sling or similar
Using a separate engine hoist attach the hoist to the load using a sling or similar
lower the hoist,
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
Using a separate engine hoist attach the hoist to the load using a sling or similar
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
The mounting bolts and fasteners and now be removed leaving the engine or gearbox
After the hoist and sling are secure on the load, raise the hoist, taking the weight of
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
3

25
27
24
26 22 23
78
9
28
1
5
78
9
15 14
77 6
8
89
9
20
19
11,12,13
8
7
9
29 7,8,9
18
4
29
5
63
21
1617
10
Fig 1
2
Assembly & Parts
4
www.lasertools.co.uk
Assembly & Parts
Assembly & Parts
Assembly & Parts
Assembly & Parts
Assembly & Parts
Assembly & Parts
Assembly & Parts
27
26
25
28
28
24
24
2
78
78
22 23
9
1
22 23
15 14
15 14
16
17
78
78
Fig 1
15 14
8
Fig 1
Fig 1
6
20
10
10
11,12,13
89
11,12,13
89
21
21
4
4
19
89
63
63
29
7
5
5
9
29
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
7,8,9
7,8,9
7,8,9
4
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
18
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk

Parts List
5
www.lasertools.co.uk
Item Description Quantity
1 Mast assembly 1
2 Rear leg 1
3 Crossmember 1
4 Front leg 1
5 Bolt M12 x 100mm 4
6 Bolt M12 x 70mm 4
7 Nut M12 15
8 Spring washer 12mm 15
9 Washer 12mm 15
10 Bolt M10 x 75mm 1
11 Nut M10 1
12 Spring washer 10mm 1
13 Washer 10mm 1
14 Wheel 2
15 Bolt M8 x 65mm 2
16 Nut M8 2
17 Spring washer 8mm 2
18 Locking caster 2
19 Caster 1
20 Pin 1
21 Spring clip 1
22 Mounting head 1
23 Mounting adaptor 4
24 Bolt M12 x 55mm 4
25 Head Locking Pin 1
26 Chain 1
27 Handle 1
28 Handle grommet 1
29 End cap 4
Parts List
Parts List
1
Item Description
Item Description
Parts List
Parts List
Parts List
3
2
Item Description
Item Description
6
5
6
5
Mast assembly
Rear leg
Mast assembly
Item Description
Item Description
8
Front leg
Crossmember
Front leg
Crossmember
Rear leg
Mast assembly
Mast assembly
Item Description
10
11
10
Nut M12
Bolt M12 x 70mm
Bolt M12 x 100mm
Bolt M12 x 70mm
Front leg
Bolt M12 x 100mm
Front leg
Crossmember
Crossmember
12
13
Washer 12mm
Bolt M10 x 75mm
Spring washer 12mm
Washer 12mm
Spring washer 12mm
Nut M12
Bolt M12 x 70mm
Nut M12
Bolt M12 x 70mm
Bolt M12 x 100mm
Bolt M12 x 100mm
16
15
15
Spring washer 10mm
Nut M10
Nut M10
Bolt M10 x 75mm
Nut M10
Bolt M10 x 75mm
Washer 12mm
Spring washer 12mm
Washer 12mm
Spring washer 12mm
Bolt M12 x 70mm
18
17
18
Wheel
Wheel
Washer 10mm
Spring washer 10mm
Washer 10mm
Spring washer 10mm
Spring washer 10mm
Nut M10
Spring washer 10mm
Nut M10
Bolt M10 x 75mm
Bolt M10 x 75mm
Spring washer 12mm
1
Quantity
Quantity
Quantity
21
20
19
Nut M8
Bolt M8 x 65mm
Nut M8
Bolt M8 x 65mm
Bolt M8 x 65mm
Washer 10mm
Washer 10mm
Washer 10mm
Spring washer 10mm
Spring washer 10mm
1
1
Quantity
Quantity
23
23
Caster
Locking caster
Caster
Spring washer 8mm
Locking caster
Spring washer 8mm
Spring washer 8mm
Bolt M8 x 65mm
Bolt M8 x 65mm
Bolt M8 x 65mm
4
4
26
25
Spring clip
Spring clip
Pin
Locking caster
Locking caster
Spring washer 8mm
Locking caster
Spring washer 8mm
15
15
28
29
28
27
Bolt M12 x 55mm
Mounting adaptor
Mounting head
Mounting adaptor
Mounting head
Spring clip
Mounting head
Spring clip
1
1
15
Chain
Handle
Chain
Head Locking Pin
Bolt M12 x 55mm
Bolt M12 x 55mm
Mounting adaptor
Mounting head
Mounting adaptor
Mounting head
1
End cap
Handle grommet
Handle grommet
Handle
Head Locking Pin
Head Locking Pin
Bolt M12 x 55mm
Head Locking Pin
Bolt M12 x 55mm
2
2
End cap
End cap
Handle grommet
Handle grommet
2
1
1
1
4
1
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
1
1
1
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
1
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
5

6
www.lasertools.co.uk
• A complete visual inspection must be made before each use of the stand.
• Check for cracked welds, corrosion, damage to the stand and loose, damaged or
missing parts.
• Check that the wheels and casters operate smoothly.
• Check that the mounting head rotation lock works correctly before applying the load.
• If any problems as described above (or otherwise) are noted, remove the stand
from service.
• Inspect the label, making sure that it is undamaged, legible and securely attached to
the stand. If not, request a replacement from the manufacturer.
• If the stand has been (or is believed to have been) subjected to an abnormal load or
shock load, the stand must be fully inspected immediately before resuming service.
60494
60493
60492
60491
Fig 2
60495
1.102
60491 - Front Caster Wheel
60492 - Central Caster Wheel
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60495 - Head Locking Pin & Chain
Regular Inspection
Engine Stand - Spare parts available
•
•
•
A complete visual inspection must be made before each use of the stand.
Regular Inspection
Regular Inspection
•
missing parts.
•
Check that the wheels and casters operate smoothly.
missing parts.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
missing parts.
A complete visual inspection must be made before each use of the stand.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
Regular Inspection
Regular Inspection
Regular Inspection
•
Inspect the label, making sure that it is undamaged, legible and securely attached to
If any problems as described above (or otherwise) are noted, remove the stand
from service.
Check that the mounting head rotation lock works correctly before applying the load.
If any problems as described above (or otherwise) are noted, remove the stand
Check that the wheels and casters operate smoothly.
Check that the mounting head rotation lock works correctly before applying the load.
missing parts.
Check that the wheels and casters operate smoothly.
missing parts.
Check that the wheels and casters operate smoothly.
A complete visual inspection must be made before each use of the stand.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
Regular Inspection
Regular Inspection
shock load, the stand must be fully inspected immediately before resuming service.
the stand. If not, request a replacement from the manufacturer.
If the stand has been (or is believed to have been) subjected to an abnormal load or
shock load, the stand must be fully inspected immediately before resuming service.
the stand. If not, request a replacement from the manufacturer.
Inspect the label, making sure that it is undamaged, legible and securely attached to
the stand. If not, request a replacement from the manufacturer.
from service.
Inspect the label, making sure that it is undamaged, legible and securely attached to
If any problems as described above (or otherwise) are noted, remove the stand
from service.
Check that the mounting head rotation lock works correctly before applying the load.
If any problems as described above (or otherwise) are noted, remove the stand
Check that the wheels and casters operate smoothly.
Check that the mounting head rotation lock works correctly before applying the load.
Check that the wheels and casters operate smoothly.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
60491 - Front Caster Wheel
Engine Stand - Spare parts available
Engine Stand - Spare parts available
Engine Stand - Spare parts available
Engine Stand - Spare parts available
shock load, the stand must be fully inspected immediately before resuming service.
If the stand has been (or is believed to have been) subjected to an abnormal load or
shock load, the stand must be fully inspected immediately before resuming service.
the stand. If not, request a replacement from the manufacturer.
If the stand has been (or is believed to have been) subjected to an abnormal load or
Inspect the label, making sure that it is undamaged, legible and securely attached to
the stand. If not, request a replacement from the manufacturer.
Inspect the label, making sure that it is undamaged, legible and securely attached to
the stand. If not, request a replacement from the manufacturer.
Inspect the label, making sure that it is undamaged, legible and securely attached to
If any problems as described above (or otherwise) are noted, remove the stand
Check that the wheels and casters operate smoothly.
Check that the mounting head rotation lock works correctly before applying the load.
If any problems as described above (or otherwise) are noted, remove the stand
Check that the wheels and casters operate smoothly.
Check that the mounting head rotation lock works correctly before applying the load.
Check that the wheels and casters operate smoothly.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60492 - Central Caster Wheel
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
60491 - Front Caster Wheel
60492 - Central Caster Wheel
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
60491 - Front Caster Wheel
60492 - Central Caster Wheel
60491 - Front Caster Wheel
Engine Stand - Spare parts available
Engine Stand - Spare parts available
Engine Stand - Spare parts available
shock load, the stand must be fully inspected immediately before resuming service.
If the stand has been (or is believed to have been) subjected to an abnormal load or
shock load, the stand must be fully inspected immediately before resuming service.
the stand. If not, request a replacement from the manufacturer.
If the stand has been (or is believed to have been) subjected to an abnormal load or
Inspect the label, making sure that it is undamaged, legible and securely attached to
the stand. If not, request a replacement from the manufacturer.
Inspect the label, making sure that it is undamaged, legible and securely attached to
the stand. If not, request a replacement from the manufacturer.
If any problems as described above (or otherwise) are noted, remove the stand
If any problems as described above (or otherwise) are noted, remove the stand
Check that the mounting head rotation lock works correctly before applying the load.
If any problems as described above (or otherwise) are noted, remove the stand
Check that the wheels and casters operate smoothly.
Check that the mounting head rotation lock works correctly before applying the load.
Check that the wheels and casters operate smoothly.
Check that the mounting head rotation lock works correctly before applying the load.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
60495 - Head Locking Pin & Chain
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60495 - Head Locking Pin & Chain
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60492 - Central Caster Wheel
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
60492 - Central Caster Wheel
60491 - Front Caster Wheel
60491 - Front Caster Wheel
60492 - Central Caster Wheel
60491 - Front Caster Wheel
60492 - Central Caster Wheel
60491 - Front Caster Wheel
Engine Stand - Spare parts available
Engine Stand - Spare parts available
shock load, the stand must be fully inspected immediately before resuming service.
If the stand has been (or is believed to have been) subjected to an abnormal load or
shock load, the stand must be fully inspected immediately before resuming service.
the stand. If not, request a replacement from the manufacturer.
If the stand has been (or is believed to have been) subjected to an abnormal load or
Inspect the label, making sure that it is undamaged, legible and securely attached to
the stand. If not, request a replacement from the manufacturer.
Inspect the label, making sure that it is undamaged, legible and securely attached to
Inspect the label, making sure that it is undamaged, legible and securely attached to
If any problems as described above (or otherwise) are noted, remove the stand
Check that the mounting head rotation lock works correctly before applying the load.
If any problems as described above (or otherwise) are noted, remove the stand
Check that the wheels and casters operate smoothly.
Check that the mounting head rotation lock works correctly before applying the load.
Check that the wheels and casters operate smoothly.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
Check that the wheels and casters operate smoothly.
A complete visual inspection must be made before each use of the stand.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
A complete visual inspection must be made before each use of the stand.
60495 - Head Locking Pin & Chain
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60495 - Head Locking Pin & Chain
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60492 - Central Caster Wheel
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
60491 - Front Caster Wheel
60492 - Central Caster Wheel
60491 - Front Caster Wheel
Engine Stand - Spare parts available
Engine Stand - Spare parts available
shock load, the stand must be fully inspected immediately before resuming service.
the stand. If not, request a replacement from the manufacturer.
If the stand has been (or is believed to have been) subjected to an abnormal load or
shock load, the stand must be fully inspected immediately before resuming service.
the stand. If not, request a replacement from the manufacturer.
If the stand has been (or is believed to have been) subjected to an abnormal load or
Inspect the label, making sure that it is undamaged, legible and securely attached to
the stand. If not, request a replacement from the manufacturer.
Inspect the label, making sure that it is undamaged, legible and securely attached to
the stand. If not, request a replacement from the manufacturer.
Inspect the label, making sure that it is undamaged, legible and securely attached to
Check that the mounting head rotation lock works correctly before applying the load.
If any problems as described above (or otherwise) are noted, remove the stand
Check that the mounting head rotation lock works correctly before applying the load.
If any problems as described above (or otherwise) are noted, remove the stand
Check that the wheels and casters operate smoothly.
Check that the mounting head rotation lock works correctly before applying the load.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
60495 - Head Locking Pin & Chain
60495 - Head Locking Pin & Chain
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60495 - Head Locking Pin & Chain
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60495 - Head Locking Pin & Chain
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60492 - Central Caster Wheel
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
Engine Stand - Spare parts available
Engine Stand - Spare parts available
shock load, the stand must be fully inspected immediately before resuming service.
shock load, the stand must be fully inspected immediately before resuming service.
If the stand has been (or is believed to have been) subjected to an abnormal load or
shock load, the stand must be fully inspected immediately before resuming service.
the stand. If not, request a replacement from the manufacturer.
If the stand has been (or is believed to have been) subjected to an abnormal load or
the stand. If not, request a replacement from the manufacturer.
If the stand has been (or is believed to have been) subjected to an abnormal load or
Inspect the label, making sure that it is undamaged, legible and securely attached to
If any problems as described above (or otherwise) are noted, remove the stand
If any problems as described above (or otherwise) are noted, remove the stand
Check that the mounting head rotation lock works correctly before applying the load.
If any problems as described above (or otherwise) are noted, remove the stand
Check that the mounting head rotation lock works correctly before applying the load.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
A complete visual inspection must be made before each use of the stand.
60495 - Head Locking Pin & Chain
60495 - Head Locking Pin & Chain
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60495 - Head Locking Pin & Chain
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
Engine Stand - Spare parts available
Engine Stand - Spare parts available
shock load, the stand must be fully inspected immediately before resuming service.
shock load, the stand must be fully inspected immediately before resuming service.
the stand. If not, request a replacement from the manufacturer.
If the stand has been (or is believed to have been) subjected to an abnormal load or
Inspect the label, making sure that it is undamaged, legible and securely attached to
the stand. If not, request a replacement from the manufacturer.
Inspect the label, making sure that it is undamaged, legible and securely attached to
If any problems as described above (or otherwise) are noted, remove the stand
Inspect the label, making sure that it is undamaged, legible and securely attached to
If any problems as described above (or otherwise) are noted, remove the stand
Check that the mounting head rotation lock works correctly before applying the load.
Check that the mounting head rotation lock works correctly before applying the load.
If any problems as described above (or otherwise) are noted, remove the stand
Check that the mounting head rotation lock works correctly before applying the load.
If any problems as described above (or otherwise) are noted, remove the stand
Check that the mounting head rotation lock works correctly before applying the load.
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
Check for cracked welds, corrosion, damage to the stand and loose, damaged or
60495
60495
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
Engine Stand - Spare parts available
Engine Stand - Spare parts available
If the stand has been (or is believed to have been) subjected to an abnormal load or
shock load, the stand must be fully inspected immediately before resuming service.
If the stand has been (or is believed to have been) subjected to an abnormal load or
shock load, the stand must be fully inspected immediately before resuming service.
If the stand has been (or is believed to have been) subjected to an abnormal load or
Inspect the label, making sure that it is undamaged, legible and securely attached to
Inspect the label, making sure that it is undamaged, legible and securely attached to
Inspect the label, making sure that it is undamaged, legible and securely attached to
If any problems as described above (or otherwise) are noted, remove the stand
Check that the mounting head rotation lock works correctly before applying the load.
If any problems as described above (or otherwise) are noted, remove the stand
Check that the mounting head rotation lock works correctly before applying the load.
Check that the mounting head rotation lock works correctly before applying the load.
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
60494 - M12, Nut, Washer & Spring Washer - 5 of each
60493 - Rear Wheel Assembly - Includes Bolt, Nut & Washer
shock load, the stand must be fully inspected immediately before resuming service.
If the stand has been (or is believed to have been) subjected to an abnormal load or
shock load, the stand must be fully inspected immediately before resuming service.
If the stand has been (or is believed to have been) subjected to an abnormal load or
Inspect the label, making sure that it is undamaged, legible and securely attached to
Inspect the label, making sure that it is undamaged, legible and securely attached to
Inspect the label, making sure that it is undamaged, legible and securely attached to
60493
60493
shock load, the stand must be fully inspected immediately before resuming service.
shock load, the stand must be fully inspected immediately before resuming service.
If the stand has been (or is believed to have been) subjected to an abnormal load or
If the stand has been (or is believed to have been) subjected to an abnormal load or
shock load, the stand must be fully inspected immediately before resuming service.
If the stand has been (or is believed to have been) subjected to an abnormal load or
Fig 2
Fig 2
6
6
Fig 2
Fig 2
Fig 2
Fig 2
60492
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
60494
60491
60491

7
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
7

Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
recognised authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to
ensure the suitability of the tools and information prior to their use.
• Wear eye and hand protection when using this stand.
• Do not use the kit for any purpose other than for which it is designed.
• Study, understand and follow all warnings and precautions before using this engine stand.
• Do not exceed rated capacity as displayed on stand.
• Always visually inspect the engine stand before use; check for cracked welds, damage to the
stand and loose, damaged or missing parts.
• Use only on a hard, level surface capable of sustaining the full load.
• Lock the mounting head rotating mechanism before applying the load.
• Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
the load of the engine.
• Do not attempt to move a loaded stand across a cracked or damaged floor.
• Never work directly under a loaded engine stand.
• Use only attachments and adaptors supplied and approved by the manufacturer.
Do not make any alterations to the engine stand.
• Failure to pay attention to these warnings may result in personal injury and property damage.
www.lasertools.co.uk
7925_Instructions_v1
Safety Warnings - please read
•
•
•
Wear eye and hand protection when using this stand.
Safety Warnings - please read
Safety Warnings - please read
•
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Study, understand and follow all warnings and precautions before using this engine stand.
•
Do not exceed rated capacity as displayed on stand.
Study, understand and follow all warnings and precautions before using this engine stand.
Do not exceed rated capacity as displayed on stand.
Do not use the kit for any purpose other than for which it is designed.
Study, understand and follow all warnings and precautions before using this engine stand.
Wear eye and hand protection when using this stand.
Do not use the kit for any purpose other than for which it is designed.
Wear eye and hand protection when using this stand.
Safety Warnings - please read
Safety Warnings - please read
Safety Warnings - please read
•
•
•
Lock the mounting head rotating mechanism before applying the load.
stand and loose, damaged or missing parts.
Use only on a hard, level surface capable of sustaining the full load.
Always visually inspect the engine stand before use; check for cracked welds, damage to the
stand and loose, damaged or missing parts.
Do not exceed rated capacity as displayed on stand.
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Do not exceed rated capacity as displayed on stand.
Study, understand and follow all warnings and precautions before using this engine stand.
Do not exceed rated capacity as displayed on stand.
Wear eye and hand protection when using this stand.
Do not use the kit for any purpose other than for which it is designed.
Wear eye and hand protection when using this stand.
Do not use the kit for any purpose other than for which it is designed.
Wear eye and hand protection when using this stand.
Safety Warnings - please read
Safety Warnings - please read
•
cause the engine to rotate. Release the locking device slowly and carefully while supporting
the load of the engine.
Do not attempt to move a loaded stand across a cracked or damaged floor.
cause the engine to rotate. Release the locking device slowly and carefully while supporting
the load of the engine.
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Lock the mounting head rotating mechanism before applying the load.
Take great care when releasing the mounting head locking device - off-centre loads will
Use only on a hard, level surface capable of sustaining the full load.
Lock the mounting head rotating mechanism before applying the load.
stand and loose, damaged or missing parts.
Use only on a hard, level surface capable of sustaining the full load.
Always visually inspect the engine stand before use; check for cracked welds, damage to the
stand and loose, damaged or missing parts.
Do not exceed rated capacity as displayed on stand.
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Study, understand and follow all warnings and precautions before using this engine stand.
Do not exceed rated capacity as displayed on stand.
Study, understand and follow all warnings and precautions before using this engine stand.
Do not use the kit for any purpose other than for which it is designed.
Study, understand and follow all warnings and precautions before using this engine stand.
Wear eye and hand protection when using this stand.
Do not use the kit for any purpose other than for which it is designed.
Wear eye and hand protection when using this stand.
Safety Warnings - please read
Safety Warnings - please read
•
•
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not make any alterations to the engine stand.
Never work directly under a loaded engine stand.
Use only attachments and adaptors supplied and approved by the manufacturer.
Never work directly under a loaded engine stand.
Never work directly under a loaded engine stand.
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not attempt to move a loaded stand across a cracked or damaged floor.
Never work directly under a loaded engine stand.
the load of the engine.
Do not attempt to move a loaded stand across a cracked or damaged floor.
cause the engine to rotate. Release the locking device slowly and carefully while supporting
the load of the engine.
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Lock the mounting head rotating mechanism before applying the load.
Take great care when releasing the mounting head locking device - off-centre loads will
Use only on a hard, level surface capable of sustaining the full load.
Lock the mounting head rotating mechanism before applying the load.
stand and loose, damaged or missing parts.
Use only on a hard, level surface capable of sustaining the full load.
Do not exceed rated capacity as displayed on stand.
Always visually inspect the engine stand before use; check for cracked welds, damage to the
stand and loose, damaged or missing parts.
Do not exceed rated capacity as displayed on stand.
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Study, understand and follow all warnings and precautions before using this engine stand.
Do not exceed rated capacity as displayed on stand.
Study, understand and follow all warnings and precautions before using this engine stand.
Do not exceed rated capacity as displayed on stand.
Do not use the kit for any purpose other than for which it is designed.
Study, understand and follow all warnings and precautions before using this engine stand.
Wear eye and hand protection when using this stand.
Do not use the kit for any purpose other than for which it is designed.
Wear eye and hand protection when using this stand.
Safety Warnings - please read
Safety Warnings - please read
Safety Warnings - please read
Failure to pay attention to these warnings may result in personal injury and property damage.
Failure to pay attention to these warnings may result in personal injury and property damage.
Do not make any alterations to the engine stand.
Failure to pay attention to these warnings may result in personal injury and property damage.
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not make any alterations to the engine stand.
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not make any alterations to the engine stand.
Never work directly under a loaded engine stand.
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not attempt to move a loaded stand across a cracked or damaged floor.
Never work directly under a loaded engine stand.
the load of the engine.
Do not attempt to move a loaded stand across a cracked or damaged floor.
cause the engine to rotate. Release the locking device slowly and carefully while supporting
the load of the engine.
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Lock the mounting head rotating mechanism before applying the load.
Take great care when releasing the mounting head locking device - off-centre loads will
stand and loose, damaged or missing parts.
Use only on a hard, level surface capable of sustaining the full load.
Lock the mounting head rotating mechanism before applying the load.
stand and loose, damaged or missing parts.
Use only on a hard, level surface capable of sustaining the full load.
Always visually inspect the engine stand before use; check for cracked welds, damage to the
stand and loose, damaged or missing parts.
Do not exceed rated capacity as displayed on stand.
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Do not exceed rated capacity as displayed on stand.
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Do not use the kit for any purpose other than for which it is designed.
Study, understand and follow all warnings and precautions before using this engine stand.
Do not use the kit for any purpose other than for which it is designed.
Wear eye and hand protection when using this stand.
Do not use the kit for any purpose other than for which it is designed.
Wear eye and hand protection when using this stand.
Safety Warnings - please read
Safety Warnings - please read
Safety Warnings - please read
Safety Warnings - please read
Our products are designed to be used correctly and with care for the purpose for which they
Failure to pay attention to these warnings may result in personal injury and property damage.
Failure to pay attention to these warnings may result in personal injury and property damage.
Do not make any alterations to the engine stand.
Failure to pay attention to these warnings may result in personal injury and property damage.
Do not make any alterations to the engine stand.
Failure to pay attention to these warnings may result in personal injury and property damage.
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not make any alterations to the engine stand.
Never work directly under a loaded engine stand.
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not attempt to move a loaded stand across a cracked or damaged floor.
Never work directly under a loaded engine stand.
Do not attempt to move a loaded stand across a cracked or damaged floor.
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Lock the mounting head rotating mechanism before applying the load.
Take great care when releasing the mounting head locking device - off-centre loads will
Lock the mounting head rotating mechanism before applying the load.
Take great care when releasing the mounting head locking device - off-centre loads will
Use only on a hard, level surface capable of sustaining the full load.
Lock the mounting head rotating mechanism before applying the load.
stand and loose, damaged or missing parts.
Use only on a hard, level surface capable of sustaining the full load.
stand and loose, damaged or missing parts.
Do not exceed rated capacity as displayed on stand.
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Study, understand and follow all warnings and precautions before using this engine stand.
Do not exceed rated capacity as displayed on stand.
Do not use the kit for any purpose other than for which it is designed.
Study, understand and follow all warnings and precautions before using this engine stand.
Do not exceed rated capacity as displayed on stand.
Wear eye and hand protection when using this stand.
Do not use the kit for any purpose other than for which it is designed.
Study, understand and follow all warnings and precautions before using this engine stand.
Do not use the kit for any purpose other than for which it is designed.
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Failure to pay attention to these warnings may result in personal injury and property damage.
Failure to pay attention to these warnings may result in personal injury and property damage.
Do not make any alterations to the engine stand.
Failure to pay attention to these warnings may result in personal injury and property damage.
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not make any alterations to the engine stand.
Never work directly under a loaded engine stand.
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not attempt to move a loaded stand across a cracked or damaged floor.
Never work directly under a loaded engine stand.
Do not attempt to move a loaded stand across a cracked or damaged floor.
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Lock the mounting head rotating mechanism before applying the load.
Take great care when releasing the mounting head locking device - off-centre loads will
Lock the mounting head rotating mechanism before applying the load.
Take great care when releasing the mounting head locking device - off-centre loads will
Use only on a hard, level surface capable of sustaining the full load.
Lock the mounting head rotating mechanism before applying the load.
Use only on a hard, level surface capable of sustaining the full load.
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Study, understand and follow all warnings and precautions before using this engine stand.
Do not use the kit for any purpose other than for which it is designed.
Study, understand and follow all warnings and precautions before using this engine stand.
Do not use the kit for any purpose other than for which it is designed.
Do not use the kit for any purpose other than for which it is designed.
Study, understand and follow all warnings and precautions before using this engine stand.
Do not use the kit for any purpose other than for which it is designed.
Study, understand and follow all warnings and precautions before using this engine stand.
Do not use the kit for any purpose other than for which it is designed.
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Failure to pay attention to these warnings may result in personal injury and property damage.
Do not make any alterations to the engine stand.
Failure to pay attention to these warnings may result in personal injury and property damage.
Do not make any alterations to the engine stand.
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not make any alterations to the engine stand.
Never work directly under a loaded engine stand.
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not attempt to move a loaded stand across a cracked or damaged floor.
Never work directly under a loaded engine stand.
Do not attempt to move a loaded stand across a cracked or damaged floor.
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Use only on a hard, level surface capable of sustaining the full load.
Lock the mounting head rotating mechanism before applying the load.
Use only on a hard, level surface capable of sustaining the full load.
Use only on a hard, level surface capable of sustaining the full load.
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Study, understand and follow all warnings and precautions before using this engine stand.
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Study, understand and follow all warnings and precautions before using this engine stand.
Do not use the kit for any purpose other than for which it is designed.
Study, understand and follow all warnings and precautions before using this engine stand.
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to
recognised authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the right to alter
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
recognised authority such as Autodata.
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
recognised authority such as Autodata.
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Our products are designed to be used correctly and with care for the purpose for which they
Failure to pay attention to these warnings may result in personal injury and property damage.
Do not make any alterations to the engine stand.
Failure to pay attention to these warnings may result in personal injury and property damage.
Do not make any alterations to the engine stand.
Failure to pay attention to these warnings may result in personal injury and property damage.
Never work directly under a loaded engine stand.
Use only attachments and adaptors supplied and approved by the manufacturer.
Never work directly under a loaded engine stand.
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not attempt to move a loaded stand across a cracked or damaged floor.
Do not attempt to move a loaded stand across a cracked or damaged floor.
Do not attempt to move a loaded stand across a cracked or damaged floor.
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Lock the mounting head rotating mechanism before applying the load.
Take great care when releasing the mounting head locking device - off-centre loads will
Use only on a hard, level surface capable of sustaining the full load.
Lock the mounting head rotating mechanism before applying the load.
Take great care when releasing the mounting head locking device - off-centre loads will
Use only on a hard, level surface capable of sustaining the full load.
Lock the mounting head rotating mechanism before applying the load.
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Study, understand and follow all warnings and precautions before using this engine stand.
Study, understand and follow all warnings and precautions before using this engine stand.
ensure the suitability of the tools and information prior to their use.
specifications and components without prior notice. It is the responsibility of the user to
ensure the suitability of the tools and information prior to their use.
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to
recognised authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the right to alter
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
recognised authority such as Autodata.
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
recognised authority such as Autodata.
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Failure to pay attention to these warnings may result in personal injury and property damage.
Failure to pay attention to these warnings may result in personal injury and property damage.
Use only attachments and adaptors supplied and approved by the manufacturer.
Use only attachments and adaptors supplied and approved by the manufacturer.
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not attempt to move a loaded stand across a cracked or damaged floor.
Do not attempt to move a loaded stand across a cracked or damaged floor.
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Take great care when releasing the mounting head locking device - off-centre loads will
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Study, understand and follow all warnings and precautions before using this engine stand.
Study, understand and follow all warnings and precautions before using this engine stand.
specifications and components without prior notice. It is the responsibility of the user to
ensure the suitability of the tools and information prior to their use.
specifications and components without prior notice. It is the responsibility of the user to
ensure the suitability of the tools and information prior to their use.
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to
recognised authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the right to alter
recognised authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the right to alter
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Our products are designed to be used correctly and with care for the purpose for which they
Failure to pay attention to these warnings may result in personal injury and property damage.
Failure to pay attention to these warnings may result in personal injury and property damage.
Failure to pay attention to these warnings may result in personal injury and property damage.
Use only attachments and adaptors supplied and approved by the manufacturer.
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not attempt to move a loaded stand across a cracked or damaged floor.
Use only attachments and adaptors supplied and approved by the manufacturer.
Do not attempt to move a loaded stand across a cracked or damaged floor.
Do not attempt to move a loaded stand across a cracked or damaged floor.
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Take great care when releasing the mounting head locking device - off-centre loads will
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Take great care when releasing the mounting head locking device - off-centre loads will
Always visually inspect the engine stand before use; check for cracked welds, damage to the
Always visually inspect the engine stand before use; check for cracked welds, damage to the
ensure the suitability of the tools and information prior to their use.
specifications and components without prior notice. It is the responsibility of the user to
ensure the suitability of the tools and information prior to their use.
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to
recognised authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the right to alter
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
recognised authority such as Autodata.
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
recognised authority such as Autodata.
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Our products are designed to be used correctly and with care for the purpose for which they
Failure to pay attention to these warnings may result in personal injury and property damage.
Failure to pay attention to these warnings may result in personal injury and property damage.
Use only attachments and adaptors supplied and approved by the manufacturer.
Use only attachments and adaptors supplied and approved by the manufacturer.
Use only attachments and adaptors supplied and approved by the manufacturer.
cause the engine to rotate. Release the locking device slowly and carefully while supporting
cause the engine to rotate. Release the locking device slowly and carefully while supporting
Take great care when releasing the mounting head locking device - off-centre loads will
cause the engine to rotate. Release the locking device slowly and carefully while supporting
ensure the suitability of the tools and information prior to their use.
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to
ensure the suitability of the tools and information prior to their use.
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to
It is our policy to continually improve our products and thus we reserve the right to alter
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Failure to pay attention to these warnings may result in personal injury and property damage.
Failure to pay attention to these warnings may result in personal injury and property damage.
ensure the suitability of the tools and information prior to their use.
specifications and components without prior notice. It is the responsibility of the user to
ensure the suitability of the tools and information prior to their use.
specifications and components without prior notice. It is the responsibility of the user to
ensure the suitability of the tools and information prior to their use.
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to
It is our policy to continually improve our products and thus we reserve the right to alter
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
If applicable, the applications database and any instructional information provided has been
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Failure to pay attention to these warnings may result in personal injury and property damage.
Failure to pay attention to these warnings may result in personal injury and property damage.
ensure the suitability of the tools and information prior to their use.
specifications and components without prior notice. It is the responsibility of the user to
ensure the suitability of the tools and information prior to their use.
specifications and components without prior notice. It is the responsibility of the user to
ensure the suitability of the tools and information prior to their use.
It is our policy to continually improve our products and thus we reserve the right to alter
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to
It is our policy to continually improve our products and thus we reserve the right to alter
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
If applicable, the applications database and any instructional information provided has been
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
Our products are designed to be used correctly and with care for the purpose for which they
Our products are designed to be used correctly and with care for the purpose for which they
www.lasertools.co.uk
ensure the suitability of the tools and information prior to their use.
ensure the suitability of the tools and information prior to their use.
ensure the suitability of the tools and information prior to their use.
specifications and components without prior notice. It is the responsibility of the user to
ensure the suitability of the tools and information prior to their use.
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to
ensure the suitability of the tools and information prior to their use.
It is our policy to continually improve our products and thus we reserve the right to alter
It is our policy to continually improve our products and thus we reserve the right to alter
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
products, and the Tool Connection cannot be held responsible for any damage to personnel,
property or equipment when using the tools. Incorrect use will also invalidate the warranty.
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
are intended. No liability is accepted by the Tool Connection for incorrect use of any of our
products, and the Tool Connection cannot be held responsible for any damage to personnel,
Our products are designed to be used correctly and with care for the purpose for which they
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
specifications and components without prior notice. It is the responsibility of the user to
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to
It is our policy to continually improve our products and thus we reserve the right to alter
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
to the accuracy of the data no project should be attempted without referring first to the
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
to the accuracy of the data no project should be attempted without referring first to the
If applicable, the applications database and any instructional information provided has been
designed to offer general guidance for a particular tool’s use and while all attention is given
If applicable, the applications database and any instructional information provided has been
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
specifications and components without prior notice. It is the responsibility of the user to
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to
It is our policy to continually improve our products and thus we reserve the right to alter
manufacturer’s technical documentation (workshop or instruction manual) or the use of a
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
www.lasertools.co.uk
7925_Instructions_v1
7925_Instructions_v1
www.lasertools.co.uk
7925_Instructions_v1
7925_Instructions_v1