Laser SmartHome LSH-FLCAM-1 User manual

User Manual
Floodlight Camera
LSH-FLCAM-1

SPK-ST40-972
Thank you
for your purchase!
Laser Corporation is 100% Australian owned &
operated. To get the most out of your product
please read the user manual carefully and keep
for future use.
For specific information relating to your product
such as Spare Parts, FAQs, Warranty claims, and
more, please scan the following QR code:

WHAT’S IN THE BOX
• Floodlight Camera
• Mounting Bracket
• USB Cable
• Wall Mount Screw Set
• User Manual

Image Sensor: 1/3” Color CMOS
Display Resolution: 1920x1080p @ 15 frames per second
Focal Length: 2.8mm
Viewing Angle: 120o
LED:
Image Compression:
Spotlight:
DNR:
WDR:
Audio:
6pcs 850nm LED, IR distance up to 8m
400 LUX
H.264
3D Digital noise reduction
Digital wide dynamic range
Built-in Microphone & Speaker
Audio Compression: PCM
Wireless: 802.11b/g/n
Remote Access: Peer to Peer
Motion Detection: PIR motion detection 8m
Storage: Micro SD Card up to
128GB (not included)
Wireless Security: WPA/WPA2,WPA-PSK/WPA2-PSK
SPECIFICATIONS
Battery:
Charging power:
Built-in 4pcs 18650 battery 10400mAh
DC5V 2A
IP Rating: IP65

PRODUCT DIAGRAM
Lens
Microphone
ON/OFF Button
SD Card Slot
Reset
USB Charging Port
Mounting Hole
Indicator Light
PIR Sensor
Light Sensor

Reset Button Controls
Note: In this manual we cover the QR pairing
mode instructions.
• Fast Flashing = QR and EZ pairing mode.
• Slow Flashing = AP pairing mode.
There are 2 flashing states:
• Press and hold for 10 seconds to reset
the camera.
• A RED LED indicator light will start flashing.

Getting Started
with the App
1. Install the Laser SmartHome
App for your Smartphone from
the iOS App Store or Google.
2. Log in with an existing
Laser SmartHome account
or create a new account.

Connecting
to the App
1. Press and hold the “RESET” button on the
Floodlight Camera till you get a fast-flashing
RED light.
2. Open the Laser SmartHome
App and tap the “+” icon to
add a device.

3. Select the “Camera & Lock”
category on the left, then select
“Smart Camera (Wi-Fi)”.
4. Enter your Wi-Fi details.
Connecting
to the App
continued...
1
2

5. On the next screen tap the
option in the top right and select
“QR Code”.
6. Select the checkbox,
then tap Next.
Connecting
to the App
continued...