manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Lasko
  6. •
  7. Fan
  8. •
  9. Lasko 1850 Owner's manual

Lasko 1850 Owner's manual

Rev. M 10/17 82085441
18" REMOTE CONTROL PEDESTAL FAN
MODEL 1850
IMPORTANT INSTRUCTIONS - OPERATING MANUAL
12085441
MODELO 1850
This Fan is for residential use only.
It is not intended to be used in commercial, industrial or agricultural settings.
Rev. M 10/17
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE,
INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY
INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD
RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
Have a Question? Need a Part?
Please Do Not Return Product to Store!
Contact Lasko Customer Service:
1-800-233-0268 Monday-Friday 8AM - 5PM EST.
ALMACENAMIENTO: Almacene el Ventilador con estas instrucciones, en la caja original en un lugar fresco y seco.
DISPOSICIÓN:Los materiales de empaque de cartón corrugado son reciclables. Para desechar este producto de manera
ecológicamente responsable, comuníquese con su proveedor de servicio de desechos local o visite www.1800recycling.com®.
REPARACIONES: Para cualquier reparación, que no sea de mantenimiento general por parte del usuario, por favor contacte a nuestro
equipo de Servicio al Cliente al (800) 233-0268 de Lunes a Viernes de 8 a.m. a 5 p.m.
CONSEJOS PARA SOLUCIONAR PROBLEMAS
Si su Ventilador falla al operar, ver abajo una lista de causas y soluciones probables:
1. Esté seguro que la cuerda del poder se tapa en un trabajar salida eléctrica.
SERVICIO AL CLIENTE:
Línea gratuita (800) 233-0268. Correo electrónico: pr[email protected]
Nuestro equipo de Servicio al Cliente está disponible para ayudarle con preguntas sobre productos, ubicaciones de los centros
de reparación y repuestos. Se puede comunicar con nuestro equipo de Servicio al Cliente de lunes a viernes, de 8 a.m. a 5 p.m.
hora del Este. Por favor tenga disponible el número de modelo, así como también el tipo y estilo
(ubicados en la parte inferior de su producto).
Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380
(Por favor no envíe el producto a esta dirección)
www.laskoproducts.com
El manual imprimió en la USA
GARANTÍA LIMITADA DE LASKO PRODUCTS, LLC (VÁLIDO EN EE.UU., SUS TERRITORIOS, Y CANADÁ ÚNICAMENTE)
QUÉ CUBRE ESTA GARANTÍAS: Este producto está garantizado contra defectos de mano de obra y/o materiales.
CUÁNTO DURA ESTA GARANTÍA: Esta garantía se extiende únicamente al comprador original del producto y dura un (1) año a partir de la fecha original
de compra o hasta que el comprador original del producto venda o transfiera el producto, cualesquiera de ambas que ocurriera en primer lugar.
QUÉ HARÁ LASKO: Lasko, a opción propia, reparará o reemplazará cualquier parte o partes que demuestren ser defectuosas o reemplazará el producto
completo por el mismo modelo u otro comparable. Para todas las reclamaciones de garantía, se debe devolver el producto a Lasko Products, LLC a
cargo del cliente con la prueba de compra dentro del período de garantía. Comuníquese con el departamento de atención al cliente de Lasko para obtener
una Autorización de Devolución (“RA”, por sus siglas en inglés). NO devuelva los productos sin una RA o no se procesará la reclamación de la garantía.
QUÉ NO CUBRE ESTA GARANTÍA: Esta garantía no tiene validez si el producto fue dañado o falló debido a un accidente, manipulación u operación
inadecuadas, daño en el envío, abuso, mal uso, reparaciones no autorizadas hechas o el intento de hacerlas. Esta garantía no cubre los costos de envío
para la devolución de productos a Lasko para su reparación o reemplazo. Lasko abonará los cargos de envío de devolución a Lasko con posterioridad
a las reparaciones o el reemplazo bajo garantía.
CUALESQUIERA Y TODAS LAS GARANTÍAS, EXPLÍCITAS O IMPLÍCITAS (INCLUYENDO, SIN LIMITACIÓN, CUALESQUIERA GARANTÍA IMPLÍCITA
DE COMERCIABILIDAD), DURAN UN AÑO A PARTIR DE LA FECHA ORIGINAL DE COMPRA O HASTA QUE EL COMPRADOR ORIGINAL DEL
PRODUCTO VENDA O TRANSFIERA EL PRODUCTO, CUALESQUIERA DE AMBAS QUE OCURRIERA EN PRIMER LUGAR Y EN NINGÚN CASO LA
RESPONSABILIDAD DE LASKO BAJO CUALQUIER GARANTÍA EXPLÍCITA O IMPLÍCITA INCLUIRÁ (I) DAÑOS INCIDENTALES O POR CONSECUENCIA
POR CUALQUIER CAUSA QUE FUERE, O (II) REEMPLAZO O REPARACIÓN DE CUALESQUIERA FUSIBLES HOGAREÑOS, CORTA-CIRCUITOS O
TOMACORRIENTES. INDEPENDIENTEMENTE DE CUALQUIER DECLARACIÓN CONTRARIA, EN NINGÚN CASO LA RESPONSABILIDAD DE LASKO
BAJO CUALQUIER GARANTÍA EXPLÍCITA O IMPLÍCITA PODRÁ EXCEDER EL PRECIO DE COMPRA DEL PRODUCTO Y DICHA RESPONSABILIDAD
TERMINARÁ AL VENCIMIENTO DEL PERÍODO DE GARANTÍA.
Algunos estados y provincias no permiten limitaciones sobre la duración de una garantía implícita, o sobre la exclusión o limitación de los daños
incidentales o por consecuencia, por lo tanto dichas exclusiones o limitaciones podrían no aplicarse en su caso. Esta garantía le otorga a usted derechos
legales específicos. Usted también podría tener otros derechos que varían de estado en estado y de provincia en provincia.
Se requiere prueba de compra antes que se acepte un reclamo bajo garantía.
MANTENIMIENTO
Para reducir el riesgo de choque eléctrico e incendio, por favor obedezca las
siguientes instrucciones.
- Siempre desconecte el cable eléctrico antes de trasladar, reparar o limpiar.
- NUNCA coloque el Ventilador dentro de o cerca de agua.
- Las parrillas desmontadas se pueden sumergir para ser limpiadas con un detergente y agua.enjuga
templados todas las otras partes con tela suave humedecida con agua y detergente templado sólo.
SEQUE TODO DESPIDE COMPLETAMENTE ANTES DE VOLVER A MONTAR. Después que cualquier
conservación o atender a, vuelven a montar completamente la unidad como descrito en este manual
de la instrucción antes de conectar de nuevo a la alimentación.
- NUNCA use ALCOHOL o SOLVENTES tales como gasolina, bencina, disolvente para pinturas u otros
limpiadores duros.
CONTROL REMOTO
1. Instale la baterías (no suministró) como mostrado en la Figura 13. La batería es el tipo
“AAA”.
2. El Botón De Encendido del Control Remoto está identificado como ( ).
3. Todas las funciones realizadas con el Control Remoto pueden realizarse
de igual forma con los Controles Manuales.
4. No mezcle baterías viejas y nuevas. No mezcle baterías alcalinas, estándar
(carbono-cinc) o recargables (níquel-cadmio).
5. No se deshága de baterías en el fuego. Baterías pueden estallar o pueden salirse.
Botón Alimentación
BotónTemporizador
Botón Velocidad
Figura 14
Figura 13
Botón
Temporizador
Botón
Alimentación
Botón
Velocidad Baterías
AAA
Tuerca de Ajuste
de Altura
MODELO 1850
Rev. M 10/17 22085441 Rev. M 10/17 72085441
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electrical shock and injury to persons, including the following:
Read all instructions before using this Fan.
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS
FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:
DO NOT use this fan to ventilate areas where flammable liquids or vapors are used, stored or are present, including paints,
gasoline, varnishes, floor refinishing products or solvents. ALWAYS read and follow all warnings and instructions on the
containers for these products!
ALWAYS be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the
outlet and create a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this
condition should be replaced by a qualified electrician.
ALWAYS unplug the power cord when servicing, cleaning or moving the Fan. DO NOT use the ON/OFF switch as the sole
means of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and
unplug the Fan when not in use.
BE CERTAIN that the power source for the Fan is 120V AC. DO NOT plug the Fan into 240V or other power source.
The Blue Plug™ on your Lasko fan is a safety feature. It contains a non-replaceable safety device (fuse) that should not be
removed or tampered with. To reduce the risk of fire, electric shock and personal injury, DO NOT attempt to remove, replace,
repair or tamper with the originally supplied plug. If the Fan has stopped functioning, it may be due to the safety device
incorporated in this plug.
THIS FAN HAS A POLARIZED PLUG (one blade is wider than the other). This plug is designed to fit into the outlet only one
way. Match the wide blade to wide slot in outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety fea-
ture. If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.
• AVOID the use of extension cords, power strips, power taps, outlet style air fresheners or other cord connected device, as these
devices may overheat and cause a fire hazard.
•DO NOT route power cord under rugs, carpets, runners or furniture. This may damage the cord or cause it to overheat creating a fire
hazard.
•ALWAYS place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning.
•NEVER insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur.
•DO NOT block, cover or obstruct air flow to or from the fan while in operation.
•DO NOT use this Fan outdoors or near water or wet locations such as a bath tub, pool or hot tub. Use of this Fan in a wet location
may create a shock hazard.
•DO NOT run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture
or appliances. Arrange cord away from traffic area and where it will not be tripped over.
•NEVER use a single extension cord to operate more than one Fan or other electrical device.
•DO NOT use this Fan if it has been damaged or is not functioning properly.
•Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this Fan. If this occurs,
move the Fan to another location.
•Keep Fan remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the Fan.
•THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).This Fan is not suitable for use in agricultural
facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article
547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings.
•THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008).This Fan is not suitable for use in hazardous
locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical
requirements for hazardous locations.
NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient
or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet
on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the
user’s authority to operate this equipment.
CAUTION
Figura 2 Figura 4Figura 3Figura 1
Tuerca de Ajuste de
Altura
Tubería de
Extension
Rejilla Trasera Figura 7
Motor
ARMADO
1. Saque el conjunto de la tubería del cartón como muestra. (Figura 1)
2. Desafloje la Tuerca de Ajuste de Altura, girando en sentido contrahorario.
(Figura 2)
3. Eleve la Extensión De La Tubería. (Figura 3)
4. Apriete la Tuerca de Ajuste de Altura, girando en sentido horario. (Figura 4)
5. Utilizando un movimiento giratorio, inserte el extremo del tubo de diámetro
grande en el agujero de la Base. (Figura 5) El girar el tubo a medida que se
lo empuja asegura que el tubo quede plenamente asentado en la Base.
Para ajustar la altura:
a) Afloje la Tuerca de Ajuste de Altura.
b) Eleve o baje el Tubo de Extensión hasta obtener la altura deseada.
c) Apriete la Tuerca de Ajuste de Altura.
6. Coloque el Conjunto de Cabezal con el Collar en el Tubo de Extensión.
(Figura 6)
7. Sostenga firmemente el Tubo de Extensión y empuje el Conjunto de Ca-
bezal hacia abajo con un movimiento giratorio hasta que quede asentado
en el Tubo de Extensión.
8. Inclinarla Cabeza del Ventilador hacia atrás. Coloque la Rejilla Trasera en
el Motor. (Figura 7) Alinear la lengüeta de la Rejilla Trasera con la ranura en
la parte superior de la cubierta delantera del Motor.
9. Asiente la Parrilla Trasera y sujetela con la Tuerca de Plástico hacia la
Derecha. Deslice la Helice en el Eje del Motor. (Figura 8) Alinear la
Ranura Del Cubo de la tapa con el Pasador del eje del motor. (Figura 8A)
10. Para asegurar la Helice, enroscarla hasta que quede apretada en el
Cubo de la Tapa haciéndola girar Hacia la Izuierda.
11. Con el cabezal del ventilador en posición vertical, alinee el Adorno de
la Parrilla Delantera de modo que quede horizontal y con el lado debido
hacia arriba. Empiece en la parte superior de la parrilla y siga hacia abajo,
insertando las Trabas de la Parrilla Trasera en las Ranuras de la Parrilla
Delantera. (Figura 9)
Ranura
del Cubo
Pasador
Figura 8A
Adorno
Ranuras
Trabas
Parrilla
Trasera
Parrilla
Delantera
Figura 9
Helice
Tuerca de
Plastico
Tapa de
Ventilador
Figura 8
Rejilla
Trasera
No tome tubos sepa-
rados. En caso de
tuberías se separa-
dos, insertar un tubo
en el tubo B.
A
B
PRECAUCIÓN:
Cuando realice el ajuste de la altura después de
conectar el ensamblaje superior, SIEMPRE sos-
tenga el tubo de extensión con una mano, pues
al aflojar la tuerca de ajuste de la altura puede
causar la caída libre del tubo de extensión y el
ensamblaje superior.
Collar
Conjunto de
Cabezal
Tubo de
Extensión
Figura 6
1. Conecte la energía eléctrica a su ventilador pulsando el Botón Alimentación
( ).
2. VELOCIDAD DEL VENTILADOR: Ahora puede ajustar la velocidad del
ventilador al nivel deseado - 1 (baja), 2 (mediana) ó 3 (alta) - pulsando el
Botón Velocidad ( ).
3. FUNCIÓN DE TEMPORIZADOR: Este ventilador está equipado con un
temporizador. El temporizador puede ser programado 1, 2 o 4 horas.
Continúe oprimiendo el Botón Temporizador ( ) para lograr el tiempo
de programación deseado. Para cancelar el temporizador, presione el
botón del temporizador hasta que se apague la luz.
4. Después de apagar el Ventilador, desconecte la unidad del tomacorriente
eléctrico.
Este Ventilador puede hacerse funcionar mediante los Controles
Manuales ubicados en la parte superior de la unidad o con el Control
Remoto (se muestra en la Figura 13).
OSCILACION: Empuje la perilla ubicada en la parte superior de la caja del
motor para hacer que la cabeza del Ventilador se mueva de un lugar hacia
otro. (Figuras 10 y 11)
INCLINACION:Este Ventilador está equipadode Cabeza deVentiladorde ángulo
múltiple para la Circulación del aire por toda habitación o cuarto. Siga lo que
se indica a continuación para graduar propiamente el "ángulo de inclinación"
del Ventilador (Figura 13. Ponga una mano sobre el soporte exactamente por
debajo del Cuello del Ventilador. Ponga la otra mano sobre la parte superior del
Ventilador. Empuje o hale suavemente la Cabeza del Ventilador hasta que quede
en la posición deseada.
FUNCIONAMIENTO
Hacia Adelante:
Oscilar
Hacia Arriba:
Estacionario
Figura 10 Figura 11
Base
Tubo de
Extensión
Figura 5
Video Tutorial de Ensamblaje:
Escanee con un teléfono inteli-
gente o visita nuestra página
www.laskoproducts.com/how-to
Figura 12
Rev. M 10/17 62085441 Rev. M 10/17 32085441
MODEL 1850
Figure 2 Figure 4Figure 3Figure 1
Height Adjustment Nut
Extension Pipe
Rear Grill
Figure 7
Motor
ASSEMBLY
1. Take pipe assembly out of carton as shown. (Figure 1)
2. Loosen Height Adjustment Nut turning counter clockwise. (Figure 2)
3. Raise Extension Pipe. (Figure 3)
4. Tighten Height Adjustment Nut turning clockwise. (Figure 4)
5. With a twisting motion, insert the end of the large diameter pipe
into hole in Base. (Figure 5) Turning pipe while pushing will assure pipe
is fully seated in Base.
For Height Adjustment:
a) Loosen Height Adjustment Nut.
b) Raise or lower Extension Pipe to desired height.
c) Tighten Height Adjustment Nut.
6. Place Head Assembly with Collar onto Extension Pipe. (Figure 6)
7. Holding Extension Pipe firmly, twist Head Assembly downward until
seated on Extension Pipe.
8. Tilt Head Assembly back. Put Rear Grill on Motor (Figure 7). Align tab
of Plastic Rear Grill with groove on top of front Motor cover.
9. Fully seat Rear Grill and secure with Plastic Nut turning Clockwise. Slide
Blade onto Motor Shaft. (Figure 8) Align Groove on blade hub with Pin on
motor shaft. (Figure 8A)
10. To secure Blade, screw Spinner onto Shaft Counter Clockwise until tight
on Blade hub.
11. With fan head in upright position, align Ornament of Front Grill so it
is horizontal and right side up. By starting with the top of the grill and
working down, insert Snaps on Rear Grill through Slots in Front Grill.
(Figure 9)
Groove
Pin
Figure 8A
Ornament
Slots
Snaps
Rear Grill
Front Grill
Figure 9
Head
Assembly
Collar
Extension
Pipe
Figure 6
Do Not take pipe apart.
Should pipes become
separated, insert pipe
A into pipe B.
A
B
CAUTION:
When making height adjustment after head assembly is attached,
ALWAYS support extension pipe with one hand, as loosening height
adjustment nut may otherwise cause rapid fall of extension pipe and
head assembly.
Rear Grill
Blade
Figure 8
Fan
Spinner
Plastic Nut
Quick Assembly Video: Scan with Smart Phone
or visit www.laskoproducts.com/how-to
OPERATION
This Fan may be operated by the Manual Controls located on front of
the unit or by the Remote Control (shown in Figure 13).
OSCILLATION: Push down oscillation knob on motor housing to make fan
head move from side to side. (Figures 10 and 11)
1. Apply power to the Fan by pushing the Power Button ( ).
2. FAN SPEED: You may now adjust the fan speed to the desired level, 1
(Low), 2 (Medium), or 3 (High) by pressing the Fan Speed Button ( ).
3. TIMER FUNCTION: This fan is equipped with a timer. The timer can
be set for 1, 2, or 4 hours. Continue pressing the Timer Button ( ) to
reach the desired time setting. To cancel timer, press Timer Button
( ) until lights are extinguished.
4. After turning the Fan off, unplug the unit from the electrical outlet.
TILTING: This Fan is equipped with a multi-angle Fan Head for Whole-Room
Air Circulation. Follow the steps below to properly adjust the "tilt angle" of your
Fan (Figure 13). Place one hand on the pole just under the Fan Neck. Place
your other hand on top of Fan. Gently push or pull the Fan Head until it is in
the desired position.
Down: OscillateUp: Stationary
Figure 10 Figure 11
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Cuando use este ventilador, se deben de seguir las siguientes advertencias y
precauciones para reducir el riesgo de incendio, descargas eléctricas y lesiones:
Lea todas las instrucciones antes de usar este Ventilador.
NO utilice este ventilador para ventilar las zonas donde se usen, almacenen o estén presentes líquidos o vapores inflam-
ables, incluidos pinturas, gasolina, barnices, disolventes o productos de acabado para pisos. ¡SIEMPRE lea y siga todas las
advertencias e instrucciones descritas en los envases de estos productos!
SIEMPRE asegúrese de que el enchufe encaje bien en el tomacorriente. Cuando los enchufes no encajan bien en el tomacor-
riente, pueden deslizarse un poco y crear una mala conexión. Esto puede causar que los tomacorrientes se sobrecalienten y
crear un riesgo de incendio potencial. Un electricista calificado debe cambiar los tomacorrientes que se encuentren en esta
condición.
SIEMPRE desenchufe el cable de corriente cuando realice mantenimiento, limpieza o mueva el ventilador. NO use el inter-
ruptor ENCENDIDO/APAGADO (ON/OFF) como el único medio para desconectar de la electricidad. NUNCA deje a los niños
sin supervisión cuando el ventilador esté encendido o conectado.SIEMPRE apague y desenchufe el ventilador cuando no
esté en uso.
ASEGURESE que la fuente de energía para el ventilador sea de 120 Vca . NO enchufe el ventilador en una fuente de energía
de 240 Vca ni en ninguna otra fuente de energía que no sea la indicada.
El Blue Plug™ en su ventilador Lasko es una característica de seguridad. Contiene un dispositivo de seguridad no remplaz-
able (fusible) que no debe ser removido ni manipulado. Para reducir el riesgo de incendios, descargas eléctricas y lesiones,
NO remueva, remplace, repare ni manipule el enchufe suministrado originalmente. Si el ventilador no funciona adecuada-
mente, puede deberse al dispositivo de seguridad incorporado en este enchufe.
ESTE ARTEFACTO TIENE UN ENCHUFE POLARIZADO (una hoja del ventilador es más amplia que la otra). Este enchufe
está diseñado para encajar en el tomacorriente de una sola forma. Haga coincidir la patilla ancha del enchufe con la ranura
ancha del tomacorriente e INSÉRTELA COMPLETAMENTE. NO intente modificar o anular esta medida de seguridad. Si el
enchufe no encaja en el tomacorriente, consulte a un electricista calificado. El enchufe puede necesitar ser remplazado.
PARA REDUCIR EL RIESGO DE INCENDIOS, DESCARGAS ELÉCTRICAS SIEMPRE SIGA LAS
SIGUIENTES INSTRUCCIONES Y ADVERTENCIAS:
PRECAUCIÓN
•EVITE el uso de cables de extensión, enchufes múltiples, triples, ambientadores eléctricos u otro dispositivo conectado por cables,
ya que estos dispositivos pueden sobrecalentarse y causar un riesgo de incendio.
•NO coloque los cables de alimentación debajo de alfombras, tapetes o muebles. Esto puede dañar el cable o causar que se
sobrecaliente y originar un riesgo de incendio
•SIEMPRE colocar el ventilador en una superficie estable, plana y nivelada mientras esté funcionando para evitar que el ventilador se caiga.
•NUNCA inserte ni permita que introduzcan los dedos u objetos en las aberturas de la parrilla del ventilador mientras este esté en
funcionamiento, ya que el ventilador puede dañarse o malograrse.
•NO bloquee, cubra ni obstruya el flujo de aire hacia o desde el ventilador mientras esté en funcionamiento.
•NO utilice este ventilador al aire libre o cerca del agua o lugares húmedos como bañeras, piscinas o jacuzzis. El uso de este
ventilador en un lugar húmedo puede provocar una descarga eléctrica.
•NO cubra el cable de corriente con tapetes, alfombras estrechas o artículos de coberturas similares. No coloque el cable de cor-
riente debajo de muebles o artefactos. Coloque el cable de corriente lejos del tráfico de la habitación, donde las personas no se
tropiecen con éste.
•NUNCA use un solo cable de extensión para hacer funcionar más de un ventilador u otro aparato eléctrico.
•NO use este ventilador si es que se ha dañado o si no funcione adecuadamente.
•Cuando use el control remoto de su televisor u otro equipamiento, verifique para controlar que no encienda el Ventilador también.
•Mantenga la unidad de control remoto del Ventilador lejos de sillas y de su cama donde exista la posibilidad de que alguien se siente
encima, deposite elementos sobre él o encienda el Ventilador inadvertidamente.
•ESTE VENTILADOR NO CUMPLE CON LOS REQUERIMIENTOS DEL ARTÍCULO 547-7 (2008) DEL NEC.Este ventilador no es
adecuado para su uso en instalaciones agrícolas, incluyendo las áreas donde el ganado, aves de corral u otros animales están
encerrados. Consulte el Artículo 547-7 (2008) del Código Eléctrico Nacional (NEC) o los códigos o normas locales o
estatales aplicables, relacionados con los requerimientos eléctricos para las instalaciones de agricultura.
•ESTE ARTEFACTO NO CUMPLE CON LOS REQUISITOS DEL ARTÍCULO 500 DEL NATIONAL ELECTRICAL CODE (Código Eléc-
trico Nacional) 2008. Este ventilador no es adecuado para uso en lugares peligrosos. Consulte el Artículo 500 del Código Eléctrico
Nacional (NEC) o LOS CÓDIGOS O NORMAS LOCALES O ESTATALES APLICABLES, RELACIONADOS CON LOS REQUERIMIENTOS
ELÉCTRICOS PARA LOS SITIOS PELIGROSOS.
AVISO: Este equipo ha sido probado y cumple con los límites para aparatos digitales Clase B, conforme a la Parte 15 de las Normas
de la FCC. Estos límites están diseñados para brindar protección razonable contra la interferencia perjudicial en una instalación resi-
dencial. Este equipo genera, utiliza y puede irradiar energía de frecuencias de radio y, si no se instala y utiliza de conformidad con las
instrucciones, puede causar interferencia perjudicial a las comunicaciones de radio. Sin embargo, no hay garantía de que la
interferencia no ocurra en una instalación en particular. Si este equipo no causa interferencia perjudicial a la recepción de radio o
televisión, lo cual se puede determinar al encender y apagar el equipo, el usuario puede intentar corregir la interferencia con una
o más de las siguientes medidas: Reorientar o reubicar la antena receptora. Aumentar la separación entre el equipo y el receptor.
Conectar el equipo en un tomacorriente de un circuito diferente a donde está conectado el receptor. Pedir ayuda al distribuidor o a
un técnico experimentado de televisión y radio. Se informa al usuario que los cambios y las modificaciones realizadas al equipo sin la
aprobación del fabricante pueden anular la autoridad del usuario de operar este equipo.
CONSERVE ESTAS INSTRUCCIONES Figure 5
Extension
Pipe
Height
Adjustment
Nut
Base
Figure 12
Rev. M 10/17 42085441
MODEL 1850
Rev. M 10/17 52085441
STORAGE: Store the Fan with these instructions, in the original carton in a cool, dry place.
DISPOSITION:Corrugated packaging materials are recyclable. For environmentally responsible disposal of this product, contact
your local waste service provider or visit www.1800recycling.com®.
SERVICING: For servicing, other than general user maintenance, please contact Customer Service at 800-233-0268, Monday
through Friday, from 8am-5pm Eastern.
TROUBLE SHOOTING TIPS
If your Fan fails to operate, see below for a list of probable causes and solutions:
1. Be sure the power cord is plugged into a working electrical outlet.
CUSTOMER SERVICE:
Toll-Free (800) 233-0268. Email: pr[email protected]
Our Customer Service team is available to assist you with product and service questions, and replacement parts. They can be
reached Monday through Friday, 8am-5pm Eastern. Please have your model number available, as well as the type and style
(located on the underside of your product).
Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380
(Please do not send product to this location)
www.laskoproducts.com
Manual printed in USA
LASKO PRODUCTS, LLC LIMITED WARRANTY (VALID IN THE USA, ITS TERRITORIES, AND CANADA ONLY)
WHAT THIS WARRANTY COVERS: This product is warranted against defects in workmanship and/or materials.
HOW LONG THIS WARRANTY LASTS: This warranty extends only to the original purchaser of the product and lasts for one (1) year from the date of
original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.
WHAT LASKO WILL DO: Lasko will, at its sole option, repair or replace any part or parts that prove to be defective or replace the whole product with
the same or comparable model. For all warranty claims, the product must be returned to Lasko Products, LLC at customer expense with proof of
purchase within the warranty period. Contact the Lasko customer service department to obtain a Return Authorization (“RA”). DO NOT return products
without an RA or the warranty claim will not be processed.
WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply if the product was damaged or failed because of accident, improper
handling or operation, shipping damage, abuse, misuse, unauthorized repairs made or attempted. This warranty does not cover shipping costs for the
return of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following warranty repairs or replacement.
ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY),
LAST ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF THE PRODUCT SELLS OR TRANSFERS
THE PRODUCT, WHICHEVER FIRST OCCURS AND IN NO EVENT SHALL LASKO’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY
INCLUDE (I) INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER, OR (II) REPLACMENT OR REPAIR OF ANY
HOUSE FUSES, CIRCUIT BREAKERS OR RECEPTACLES. NOTWITHSTANDING ANYTHING TO THE CONTRARY, IN NO EVENT SHALL LASKO’S
LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT AND ANY SUCH LIABILITY SHALL
TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD.
Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights which
vary from state to state and province to province.
Proof of purchase is required before a warranty claim will be accepted.
MAINTENANCE
To reduce the risk of electrical shock and fire please observe the following instructions:
- Always unplug the cord before moving, servicing or cleaning.
- NEVER place the Fan in or near water.
- Disassembled grills may be immersed to be cleaned with a mild detergent and water. Wipe all other parts
with soft cloth moistened with water and mild detergent only. DRY ALL PARTS COMPLETELY BEFORE
REASSEMBLING. After any maintenance or servicing, completely reassemble unit as described in this instruction
manual before reconnecting to the power supply.
- NEVER use ALCOHOL or SOLVENTS such as gasoline, benzene, paint thinner, or other harsh cleaners.
WARNING
REMOTE CONTROL
1. Install batteries (not supplied) as shown in Figure 13. The battery is size “AAA”.
2. The Remote Control Power Button is labeled as ( ).
3. All the functions performed with the Remote Control work identically to the Manual Controls.
4. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel- cadmium) batteries.
5. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK. Figure 13
Power
Button
Speed Button
Timer Button
AAA
Batteries
Power Button
Timer Button
Speed Button
Figure 14
VENTILADOR DE PEDESTAL DE 18 PULGADAS
CON CONTROL REMOTO
MODELO 1850
INSTRUCCIONES IMPORTANTES - MANUAL DE OPERACIÓN
Este Ventilador es sólo para uso residencial.
No está destinado para ser usado en instalaciones comerciales, industriales o agricultura.
LEA Y GUARDE ESTAS INSTRUCCIONES
LEA CUIDADOSAMENTE LAS INSTRUCCIONES ANTES DE INTENTAR
ARMAR, INSTALAR, USAR O DAR MANTENIMIENTO AL PRODUCTO
DESCRITO. PROTÉJASE A SÍ MISMO Y A LOS DEMÁS CUMPLIENDO
CON TODA LA INFORMACIÓN DE SEGURIDAD. EL NO SEGUIR LAS
INSTRUCCIONES PODRÍA RESULTAR EN LESIONES PERSONALES Y/O
DAÑOS A LA PROPIEDAD.
Tiene Preguntas? Necesita una Parte?
Por favor no regrese el producto a la tienda!
Contacte al departamento de servicio al cliente
de Lasko Products: 1-800-233-0268
Lunes - Viernes 8am a 5pm (Tiempo del Este)

Other Lasko Fan manuals

Lasko 4006 User manual

Lasko

Lasko 4006 User manual

Lasko 2022 User manual

Lasko

Lasko 2022 User manual

Lasko 4907ES User manual

Lasko

Lasko 4907ES User manual

Lasko T36511 User manual

Lasko

Lasko T36511 User manual

Lasko W16900 User manual

Lasko

Lasko W16900 User manual

Lasko T48301 Owner's manual

Lasko

Lasko T48301 Owner's manual

Lasko CYCLONE S18924 User manual

Lasko

Lasko CYCLONE S18924 User manual

Lasko D300 User manual

Lasko

Lasko D300 User manual

Lasko 1880 Owner's manual

Lasko

Lasko 1880 Owner's manual

Lasko T14401 Owner's manual

Lasko

Lasko T14401 Owner's manual

Lasko 2155A User manual

Lasko

Lasko 2155A User manual

Lasko TWIST TOP T12110 Owner's manual

Lasko

Lasko TWIST TOP T12110 Owner's manual

Lasko 1820 User manual

Lasko

Lasko 1820 User manual

Lasko S20620 User manual

Lasko

Lasko S20620 User manual

Lasko 3733 User manual

Lasko

Lasko 3733 User manual

Lasko 2108 User manual

Lasko

Lasko 2108 User manual

Lasko U35105 Owner's manual

Lasko

Lasko U35105 Owner's manual

Lasko U35115 User manual

Lasko

Lasko U35115 User manual

Lasko 2506 Installation instructions manual

Lasko

Lasko 2506 Installation instructions manual

Lasko 2510 User manual

Lasko

Lasko 2510 User manual

Lasko WEATHER-SHIELD B20570 Owner's manual

Lasko

Lasko WEATHER-SHIELD B20570 Owner's manual

Lasko 4000 Owner's manual

Lasko

Lasko 4000 Owner's manual

Lasko 3515 User manual

Lasko

Lasko 3515 User manual

Lasko WIND CURVE 2551 User manual

Lasko

Lasko WIND CURVE 2551 User manual

Popular Fan manuals by other brands

Panasonic FV-0511VF1 Service manual

Panasonic

Panasonic FV-0511VF1 Service manual

Fanelite S1632-R PG user manual

Fanelite

Fanelite S1632-R PG user manual

emerio FN- 108782.2 manual

emerio

emerio FN- 108782.2 manual

NOMA Landon user manual

NOMA

NOMA Landon user manual

ZIEHL-ABEGG FA Series Assembly guide

ZIEHL-ABEGG

ZIEHL-ABEGG FA Series Assembly guide

NuTone 773BNNT quick start guide

NuTone

NuTone 773BNNT quick start guide

Turn of the century 20587 owner's manual

Turn of the century

Turn of the century 20587 owner's manual

XO Appliance XOIL4819KS manual

XO Appliance

XO Appliance XOIL4819KS manual

Stelpro SBFHL070 installation guide

Stelpro

Stelpro SBFHL070 installation guide

Craftmade Daybreak DBK52 installation guide

Craftmade

Craftmade Daybreak DBK52 installation guide

UFO ATEAC-01 user manual

UFO

UFO ATEAC-01 user manual

Klimawent SMART-EC-4000 Use and maintenance manual

Klimawent

Klimawent SMART-EC-4000 Use and maintenance manual

Attic Breeze GEN3 GM Series installation guide

Attic Breeze

Attic Breeze GEN3 GM Series installation guide

Westinghouse ETL-ES-Alloy-WH21 owner's manual

Westinghouse

Westinghouse ETL-ES-Alloy-WH21 owner's manual

Insignia NS-F12R6-SS Quick setup guide

Insignia

Insignia NS-F12R6-SS Quick setup guide

Optimus F-1672BK-F Instruction manual and owner's guide

Optimus

Optimus F-1672BK-F Instruction manual and owner's guide

Modern Fan Co Pensi installation instructions

Modern Fan Co

Modern Fan Co Pensi installation instructions

Hunter Protos manual

Hunter

Hunter Protos manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.