Lasvit 14X030-00 User manual

Light source replacement/
The light source contained in this luminaire shall only be
replaced by the manufacturer or his service agent or a
similar qualified person.If the light source is broken contact
the manufacturer.
The fixture was designed and manufactured by /
Lasvit s.r.o / Komunardů32 /17000 Praha 7/Czech Republic
T+420 481120 810/ F+420 481220622 E [email protected]
www.lasvit.com
The product mustn't be removed together with mixed
residential waste, it must be postponed to designated places
or in places of return.
In case you need any assistance or have
any suggestion, please contact us at
www.lasvit.com
©Lasvit s.r.o / Komunardů894/32
17000 Praha 7/Czech Republic
CLOVER
FLOOR LAMP
MANUAL
Light Design Experience
by Michael Young
CE
�

2/ Step-by-step installation
ATTENTION! Before starting any procedures make sure
that the power to the lighting fixture is switched OFF and
secured against unauthorized, negligent or accidental
switching on.
Installation should be carried out by a qualified technician to
prevent any damage to health or property.
The light source contained in this luminaire shall only be
replaced by the manufacturer or his service agent or a
similar qualified person.
The external flexible cable or cord of this luminaire cannot
be replaced; if the cordis damaged, the luminaire shall be
destroyed.
Slight connection problem may occur to any of the clove. If
any of the clove is not illuminating, please try to tighten the
clove as illustrated.Please tighten the top before the bottom
if both are not lit.
This lighting is for indoor use only.
Place the lighting fixture in a way that prevents it from
being damaged and the risk of electric injury is minimized.
Do not cover the lighting fixture with any material, it is
necessary for the hot parts to be cooled by freely flowing
air, otherwise there is a risk of fire.
Installation requires 1 person.
Plug in the lamp to the power outlet and switch it on
Clover floor lamp CE
1/ TECHNICAL PARAMETERS:
Item ID: 14X030-00
Dimensions: Dia 510 x H 1630 mm
Weight approx.: 18 kg
Input voltage: 220-240V, 50/60 Hz
Rated power: LED 50W
Protection rating: IP 20
Safety class: CLASS II
The producer Lasvit s.r.o.declares under its sole responsibility
that fixed luminaire 14X030-00 conforms to the following
standards:
Please read this manual carefully and keep it in case you
need assistance while performing maintenance and cleaning
procedures.
Standards
IEC 60598-2-4:1997 Ed.2rd,
IEC 60598-1:2014 Ed.8th ,
IEC 62031:2012,
IEC 62471:2006
Lock
Lock
Lock