Lasvit Michael Young CLOVER 14X051-00 User manual

Light Design Experience
CLOVER
Table LAMP
MANUAL
by Michael Young
ETL
�
Light source replacement/
The light source contained in this luminaire shall only be
replaced by the manufacturer or his service agent or a
similar qualified person.If the light source is broken contact
the manufacturer.
The fixture was designed and manufactured by /
Lasvit s.r.o / Komunardů32 /17000 Praha 7/Czech Republic
T+420 481120 810/ F+420 481220622 E [email protected]
www.lasvit.com
The product mustn't be removed together with mixed
residential waste, it must be postponed to designated places
or in places of return.
IMPORTANT SAFETY INSTRUCTIONS
This portable luminaire has a polarised plug (one blade
is wider than the other) as a feature to reducethe risk of
electric shock. This plug will fit in a polarised outlet only one
way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician.
Never use with an extension cord unless plug can be fully
inserted. Do not alter the plug.
In case you need any assistance or have
any suggestion, please contact us at
www.lasvit.com
©Lasvit s.r.o / Komunardů894/32
17000 Praha 7/Czech Republic

Clover Table lamp ETL 2/ Step-by-step installation
ATTENTION! Before starting any procedures make sure
that the power to the lighting fixture is switched OFF and
secured against unauthorized, negligent or accidental
switching on.
1/ TECHNICAL PARAMETERS:
Item ID: 14X051-00
Dimensions: Dia10 1/4" x H21 5/8"
Weight approx.: 8.8Lb
Input voltage: 12V DC
Rated power: LED 8W
Protection rating: IP 20
Safety class: CLASS III
The producer Lasvit s.r.o. declares under its sole
responsibility that fixed luminaire 14X051-00 conforms to the
following standards:
Please read this manual carefully and keep it in case you
need assistance while performing maintenance and cleaning
procedures .
The compliance is proved by ETL listing number 5002853
Installation should be carried out by a qualified technician to
prevent any damage to health or property.
This lighting is for indoor use only.
Place the lighting fixture in a way that prevents it from being
damaged and the risk of electric injury is minimized.
Do not cover the lighting fixture with any material, it is
necessary for the hot parts to be cooled by freely flowing air,
otherwise there is a risk of fire.
Installation requires 1 person.
Plug in the lamp to the power outlet and switch it on.
The light source contained in this luminaire shall only be
replaced by the manufacturer or his service agent or a similar
qualified person.
The external flexible cable or cord of this luminaire cannot
be replaced; if the cord is damaged, the luminaire shall be
destroyed.
The manufacturer shall not be held liable for any defects
caused by unqualified handling of the lighting fixture.
Slight connection problem may occur to any of the clove.If
any of the clove is not illuminating, Try to tighten the clove as
illustrated.Please tighten the top before the bottom if both
are not lit.
USA Standards Canada Standards
UL153:2002 Ed.12th Rev.Mar14. CSA C22.2 No.250.4:1982R2008
UL8750:2009 Ed.1st Rev.May 14 CSA C22.2 No.250.13.2014
Lock