Leading Solutions Tab Secure User manual

Tab Secure
ASSEMBLY
TABLE TOP

Tab Secure Desk with
Free Standing Base
Secure your tablet in style with the Tab Secure
Tablet stands. This Flex mounted solution allows
you to mount any tablet on any surface. Help your
customers to help themselves when things get
busy; put your tablets to work as an engaging tool
and let it interact with your clients.
Internal specic tablet tting kit.
Can be mounted in landscape or portrait mode.
Tamper proof tubular lock with 2 keys.
Kensington lock point for optional extended security.
Radio-transparent chassis for Wi-Fi, Bluetooth, 3/4G,
and NFC.
Available in Both Black and White.
2

3
Key Features
Secure Enclosure Ground Support Future Proong
Each enclosure is secured together by
a high quality key and barrel.
Built from strong high grade aluminium
alloy to support and secure your tablet.
Easily accommodate new tablet models
by replacing the “old” blue rubber kits
(and acrylic faceplate).

4
What’s In The Box
Table Fit Kits Metal Face Cover Acrylic Faceplate Enclosure Stalk
Pair of Keys 8x Bolts Washer Plate Free Standing Base Plate

Dimension Enclosures
264mm 370mm
304mm
168mm 216mm 272mm
28mm 27mm
28mm
Enclosure 7”-9” Enclosure 9” - 11” Enclosure 12.9
5

25cm
6
Dimension Free standing Base
The measurements below are for 9-11 enclosures.
216mm
Rubber Sleeve
Charging cable Outlet

Installation Guide
STEP 1: STEP 2:
Attach the Case to the Stem by using the
four bolts and the mounting washer
to join together.
Firmly insert each of the four Fit Kit rubber
corner pieces into the case by aligning with
the Positioning Pins.
4x Bolts
Mounting Washer
Fixed Stem
Empty Case
Key Lock
Fit Kit
Corner Pieces
Positioning Pins
7

8
Insert Ipad or Tablet
STEP 1: STEP 2:
Connect the charge cable to the tablet,
then insert your tablet into the Fit Kit
corner pieces. It should sit neat and snug.
First, peel the brown protective seal from one side
of the Access Cover. Then insert the Access Cover
over the top of your tablet with the black, shiny
side facing up.
Key Lock
Access Cover
On Top
Tablet Sits
Underneath

The last step is to lock-down the Metal Face Cover to secure and protect
your tablet. First, position the two Fixing Hooks into the Case (opposite
side of the Key Lock). Then pop in the other end. The Faceplate should
click into the Case and sit ush.
Attach The Faceplate
Key Lock Metal Face Cover
Fixing Hooks
Example
9

To complete the setup of your kiosk and ensure your device is secure,
make sure to push in the lock-pin. To unlock use the 2 keys provided.
Push To Lock
When the lock-pin stands out,
it means your kiosk is open
To secure your kiosk, push
in the lock-pin
10
Please note: The Pair of Keys are use to unlock the kiosk.

Table Top Power Option
11
Route the cable through the stalk. Once the cable is at the
desired length connect the free standing base to the stem
using the four bolts and tighten from underneath.
STEP 1: