
For Model LKGH-8302SDP / LKGH-8303SDP
6.1. Cleaning the top plate. Use soft cloth and mild detergent to wipe. Do not use PVC or metal brush
to clean.
6.2. Do not use alkaline detegent, petro, corrosive or bleaching material.
6.3. Do not put metal sheet, wire gauze or aluminium plate on top og burner for cooking purpose as this
will cause irremovable stain and spoil top plate.
6.4. Use soft cloth or foam to clean the burner cap. Use soft brush for tough stain.
6.5. Do not hit or wash wash the burner cap with strong force.
4.1. Ensure ignition is at the ‘OFF’ position.
4.2. To ignite the Dual Ring flame turn on the gas cylinder, push the
ignition knob downwards and turn the knob antu-clockwise.
4.3. For hobs with safety valve feature, hold for 3-5
seconds when pushing the iginition knob downwards
before turning the knob anti-clockwise.
4.4. Flame can be adjusted accordingly bu the ignition knob.
4.5. To ignite the Inner Ring flame turn on the gas cylinder, push the
ignition knob downwards and turn the knob antu-clockwise.
4.6. Flame can be adjusted accordingly bu the ignition knob.
4.7. Rotate knob clockwise until off position when finish.
5.1. Ensure ignition is at the ‘OFF’ position.
5.2. To ignite turn on the gas cylinder, push the
ignition knob downwards and turn the knob antu-clockwise.
5.3. For hobs with safety valve feature, hold for 3-5
seconds when pushing the iginition knob downwards
before turning the knob anti-clockwise.
5.4. Flame can be adjusted accordingly bu the ignition knob.
5.5. Rotate knob clockwise until off position when finish.
Push downwards and
turn anti-clockwise.
(Dual Ring Flame)
Push downwards and
turn anti-clockwise.
(Inner Ring Flame)
Push downwards and
turn anti-clockwise.
OFF
HIGH HIGH
LOW LOW
OFF
HIGH
LOW
For Model LKGH-8303SDP / LKGH-8302SDP