Lectron Pedestal for V-BOX EV Charging Station User manual
Pedestal for V-BOX
EV Charging Station
USER MANUAL
In the Box
Page 1
1 x pole A 1 x pole B
1 x set pole A and
B screws
1 x set of fixing screws
1 x set of holder screws
(M6 Hex Screws)
1 x holder
Note:
1. Allen key is not included.
2. Stoppers can be used for empty screw holes.
Page 2
1. Lay pole B flat on the ground and fix the mounting plate
to it.
2. Attach the V-BOX to the mounting plate.
Installation (Method A)
Page 3
3. Attach the holder to pole B.
4. Secure pole A to the ground with the four fixing screws
provided.
Page 4
5. Place the power cable into pole A and slide pole B onto
the top of pole A.
6. Screw together pole A and pole B.
Page 5
7. Wrap up the cable and hang it on the holder.
8. Connect the power cord to the power outlet.
Note: Please use a weatherproof outlet for outdoor use.
Page 6
1. Lay pole B flat on the ground and fix the mounting plate
to it.
2. Detach the NEMA 14-50 plug from the V-BOX power cord.
Installation (Method B - Licensed Electrician Recommended)
Page 7
3. Attach the V-BOX to the mounting plate.
4. Insert the power cord into the hole on pole B.
7. Pull out the power cord from the bottom hole of pole A.
Page 8
5. Attach the holder to pole B.
6. Secure pole A to the ground with the four fixing screws
provided.
Page 9
8. Place the power cable into pole A and slide pole B onto
the top of pole A.
9. Screw together pole A and pole B.
Page 10
10. Wrap up the cable and hang it on the holder.
11. Connect the power cord to the power supply.
L N PE
www.ev-lectron.com
Made in China
Scan the QR code below or email us at
Get More Support
Table of contents
