1.Before installing this fixture, please ensure the environment where you intend to
Application
Installation requirement
Notice
RoHS
COMPLIANT
These 2nd Generation Floodlights can be used in wide variety of exterior
floodlighting applications including building facade and landscape illumination,
install the fixture conforms to the product specifications. Since this fixture provides
slight grade corrosion protection, it cannot be used in highly corrosive environments.
Contact 1000Bulbs.com if you have special requirements.
2.Do not use this fixture in areas where water accumulates.
3.Do not use this fixture in an enclosed environment.
4.Ensure the operational ambient temperature for this fixture falls within the -40 -131
degree Fahrenheit range.
5.Please confirm the input voltage and frequency conforms to the product specifications.
6.Professional installation and maintenance is required, since dangerous 100-277V
connections will be made.
7.Do not install this fixture if it was received with damage to the electrical conductors or
To ensure proper usage of lamps,please carefully read and keep this instruction
Features
1. The very tight waterproof design boasts an IP 65 rating.
2. The die-cast aluminum alloy fixture body combines with a tempered glass
cover to create a highly durable floodlight.
3.Highly efficient thermal management draws heat away from the LED's and
internal power supply to ensure a long, stable product life which is backed
by a 5 year warranty.
4.Boasts a CRI in excess of 80 in support of high color rendering applications.
5.UL Listed and RoHS Compliant.
6.These 2nd Generation Floodlights boast a -40 to 131 degree Fahrenheit
ambient operating temperature range while providing slight grade corrosion
protection.
1.Turn power off before installation.
2.In accordance with the National Electrical Code, install an exterior rated junction
box atop a securely mounted electrical conduit. The exterior rated junction box
should include 1/2" threads for use with the 1/2" threads on the fixture's knuckle mount.
3.Install the fixture's knuckle mount into the exterior rated junction box, and appropriately
tighten the fixture into junction box.
4.Make necessary electrical connections in accordance with the National Electrical
Code within the junction box. Then secure the exterior rated junction box cover to
the junction box.
5.Loosen the set screw, adjust the fixture aiming angle as desired, and then retighten
the set screw.
6.Connect power to the fixture.
User Manual of 2nd Generation
Floodlights
◎LED floodlight
industrial and sports centers, ports, and parking lots.
manual for future reference.
