LEDSpace SPLASH12 User manual

SPLASH12 LED Strip
Installation Guide
A complete solution
created by us
to make it easy
for you
SPLASH12 - Instructions A5.indd 1SPLASH12 - Instructions A5.indd 1 27/08/2023 17:5127/08/2023 17:51

Safety first
Always test the LED strip BEFORE installing.
NEVER connect LED strip directly to a 240V
mains or wall socket. ALWAYS connect via
LED power supply.
Twisting, treading on, or pressing the LED
strip too hard when installing may impede its
performance or prevent it from working at all.
This LED strip is for indoor or outdoor use and
may be used in bathrooms or other wet areas.
It is not, however, suitable for submersion in
water.
NB: Please contact us within four days of
receipt if, after testing, you find any faults with the
equipment.
Seamless SPLASH12 LED strip, made to measure, with sealed end caps and cable tail.
Maxilux Wi-Fi/RF interface (if required), Maxilux LED power supply (plug and mains power lead
not supplied). You may have also ordered other components, mounting proles, etc.
LEDSpace SPLASH12 Seamless LED Strip
Thank you for choosing this LEDSpace product. Your basic components are as follows:
Splash12 waterproof LED strip comes in two flexible types: ‘side-bending’ and ‘top-bending’,
based on your design and order choice.
side-bending top-bending
SPLASH12 - Instructions A5.indd 2SPLASH12 - Instructions A5.indd 2 27/08/2023 17:5127/08/2023 17:51

ledspace.co.uk
Putting your LEDSpace lighting system together – Numbers refer to installation steps
u
u
Dierent surfaces will require dierent xings. Generally, we suggest xing SPLASH12 using
our rigid or exible mounting proles, or clips. These may be xed by drilling and screwing or
by using a grip or impact adhesive, silicone glue or other compatible bonding agent.
uFix or bond your rigid or flexible mounting
channel or mounting clips to the mounting
surface, using screws, silicon or adhesive.
Leave enough space at the end, as caps sit
outside the end of the mounting channels.
Gently press the LED strip into the channel or
mounting clips.
v
u
w
x
SPLASH12 - Instructions A5.indd 3SPLASH12 - Instructions A5.indd 3 27/08/2023 17:5127/08/2023 17:51

• depending on your choice of strip, you will
have either 2, 3 or 5 cables. Wire to interface
using instructions provided in the box.
wWiring the power supply to the interface
• wire 24V terminals on the power supply to
the 24V terminals on the interface.
xWiring the power supply to the mains
power lead
[email protected] • 02477 395995 • 16 Falkland Close, Coventry CV4 8AU
ledspace.co.uk/pack-help
vWiring the cable to the interface
• strip mains cable wires
• unscrew terminal screws at 220–240V
input end
• insert wires: brown to live terminal and blue
to neutral
• retighten screws and check for secure
connection.
Controlling your LED strip lighting
Control with a remote control, multi-zone wall
switch, smartphone or smart speaker. Scan
the QR code below to download the app.
Your interface will need to be programmed.
Please refer to the instructions supplied with
the interface.
Troubleshooting, data sheets, detailed
instructions and tips
Please scan the following QR code, which will
take you to our help page.
SPLASH12 - Instructions A5.indd 4SPLASH12 - Instructions A5.indd 4 27/08/2023 17:5127/08/2023 17:51