
Part C
Minifix cover
Quantity=13
Part A
Minifix bolts M6
Quantity=15
Fittings supplied Tools required
Pozi head screw driver
Nylon hammer
Assembly instruction leaflet no. 58 B
Assembly steps
1. Place the top upside down.
Screw three Part A into
the top for (modesty panel attachment).
2. Lift and locate the modesty panel
onto the three Part A in the top.
Do not tighten the three
minifix cams.
3. Screw six Part A and push
four Part B into the top for slab panel
attachment. Knock two Part D
into rail ends.
4. Screw six Part A into the appropriate
holes on the slab panel to locate
with modesty panel
5. To add the Slab panel, lift the modesty
slightly and locate three Part A on
one slab leg with the three minifix cam
holes on one end of the modesty panel.
Then lower the both the slab and modesty
panel onto the two Part A/two Part B in
the top. Repeat this process for the
other slab panel.
6. Tighten the nine minifix cams in the
modesty panels and the two in
each slab panel.
7. Push Parts C into the appropriate
places to finish the desk.
Atmosphere Slab Workstation/Wave
Part B
Wood dowells
Quantity = 8
C
A
B
Part D
Plain silver bung
Quantity=2
D
Slab Modesty
Slab
Top
Wave desk shown