Legamaster EASY VIEW User manual

Legamaster EASY VIEW camera 4K ePTZ QSG - Version 1.0
Legamaster EASY VIEW camera 4K ePTZ
1.1 REMOTE CONTROL
1.0 CAMERA CONNECTION
1. Infrared indicator light
2. Stand By
The device enters standby mode after pressing it once and wakes up after pressing it again.
3. Menu Button
Enter/exit the OSD menu or return to the previous menu.
Down: press
4. Pan/Tilt Control
Up: press
Left: press
Right: press
Press and hold the up/down/left/right key, the pan/tilt movements will keep running.
【OK】：Camera lens back to the middle position; Enter next menu
5. Number key
Number keys 1, 2, 3: to preset positions settings.
Note: Short press for 1s [preset position recall]; long press for 3s [preset position setting]
Long press for 5s [preset delete]
6. Zoom Control
【 】: press【 】key to zoom in
【: press 【 】key to zoom out
7. Auto Framing Function Key
1. Make sure to connect your camera using the included USB cable to your desired
device and that this device recognizes it (if you connect it to your Windows device,
you will hear a notification sound when connecting it).
2. You will also need to make sure that your camera is selected as an input device on
your preferred videoconferencing software. You will usually find this by going into
your videoconferencing client settings and selecting the “devices” menu.

Legamaster EASY VIEW camera 4K ePTZ QSG - Version 1.0
QUICK USE GUIDE
3) Pan/Tilt Control
Rotate up: press【 】key Rotate down: press【 】
Rotate to the left: press the【 】key
Rotate to the right: press the【 】key
Middle position: press【OK】key
Long press the up, down, left, and right rotation
buttons, it will continue to rotate from slow to fast until
the end of the stroke; release it halfway to stop the
rotation.
4）Preset position setting, calling, deleting
1. Save the preset position: Long press (within 3s-5s) one
of the keys 1 to 3, and a preset a position corresponding
to the number key will be saved.
2. Call the preset position: directly press the number
keys 1 to 3 to call the saved preset position.
3. Delete preset position: Long press (5s) one key 1 to 3
to delete a saved preset position corresponding to the
number key.
Note: If the number key is not preset, it is invalid.
5）Zoom Control
1. Zoom in: press the 【 】key
2. Zoom out: press 【 】key
3. If you long press these two buttons, it will continue to
zoom in/out; release it halfway to stop zooming.
6) Auto Framing Function On/Off
Turn on/off Auto Framing Function
1.2 OPERATION
1）Infrared indicator light
1. Flashing (red): Sending instructions
2. No flashing: do not send instructions
2）Standby, Menu Setting
1. Standby button : turn on or turn off the camera
image
2. Menu key : call up the camera OSD menu