LEGEND CHEF ES606MB User manual
INSTRUCTION MANUAL
Built-in Electric Oven
MODEL: ES606MB
ES606MS
ES611TS
1
DEAR CUSTOMER
The oven is exceptionally easy to use and extremely efficient. After reading the instruction manual.
operating the oven will be easy.
Before being packaged and leaving the manufacturer, the oven was thoroughly checked with regard to
safety and functionality.
Before using the appliance, please read the instruction manual carefully.
By following these instructions carefully you will be able to avoid any problems in using the appliance.
It is important to keep the instruction manual and store it in a safe place so that it can be consulted at any
time.
It is necessary to follow the instructions in the manual carefully in order to avoid possible accidents.
Caution!
Do not use the oven until you have read this instruction manual.
The oven is intended for household use only.
The manufacturer reserves the right to introduce changes which do not affect the operation of the
appliance.
2
TABLE OF CONTENTS
Safety instructions.....................................................................................................................3
Description of the appliance..................................................................................................6
Installation....................................................................................................................................9
Operation.......................................................................................................................................11
Cleaning and maintenance......................................................................................................12
Technical data...............................................................................................................................14
3
SAFETY INSTRUCTIONS
NOTE：
Ensure there is a grounded socket nearby (behind the unit)
A dedicated power circuit is recommended for the unit but not required. Additional electrical appliances
on the same circuit may exceed the current (amperage) rating for that circuit. If after the installation of
your unit, the circuit breaker trips or the fuse fails on a repeated basis, and then a dedicated circuit will
likely be required.
! The appliance must be installed only by a qualified person in compliance with the instructions
provided. Incorrect installation may cause harm to persons, animals or may damage property.
The manufacturer declines all responsibility for improper installation which may harm persons and
animals and damage property.
Important: The power supply to the appliance must be cut off before any adjustments or maintenance
work is done on it.
WARNING:
When using this product, basic precautions should always be taken, including the following:
Your building-in oven is a classified electrical appliance. As with any electrical appliance and particularly
with electric heaters, basic precautions must be followed in order to reduce the risk of fire,burns,electrical
shocks and/or other serious injuries or death.
！The appliance becomes hot during operation. Take care not to touch the hot parts inside the oven.
！Always keep children away from the cooker.
While in operation direct contact with the cooker may cause burns!
！Ensure that small items of household equipment, including connection leads, do not touch the hot oven
or the hob as the insulation material of this equipment is usually not resistant to high temperatures.
！Do not leave the cooker unattended when frying. Oils and fats may catch fire due to overheating or
boiling over.
！Do not put pans weighing over 15 Kg on the opened door of the oven and pans over 25kg on the hob.
！Do not use harsh cleaning agents or sharp metal objects to clean the door as they can scratch the
surface, which could then result in the glass cracking.
！Do not use the cooker in the event of a technical fault. Any faults must be fixed by an appropriately
qualified and authorized person.
In the event of any incident caused by a technical fault, disconnect the power and report the fault to the
service center to be repaired.
The rules and provisions contained in this instruction manual should be strictly observed.
！Do not allow anybody who is not familiar with the contents of this instruction manual to operate the
cooker.
The cooker should not be cleaned using steam cleaning equipment.
！The panels adjacent to the oven must be made of heat-resistant material.
！Cabinets with a veneer exterior must be assembled with glues which can withstand temperature of up to
100℃.
！Keep combustible materials, such as: curtains, drapes, furniture, pillows, clothing, linens, bedding,
paper, etc. at least 3 feet (0.9 meters) from the front sides and rear of the heater. Do not use this unit in
areas where gasoline, paint or other flammable liquids or their associated vapors may be present.
4
！To reduce the risk of fire, do not place or install this unit in areas where the ventilation or circulation
ducts may become blocked.
！The unit's power cord must be connected to a properly grounded and protected, 220-240V electrical
outlet. Always use ground fault protection where required by the electrical code. To reduce the risk of fire,
avoid running the power cord under rugs, carpets, etc. Keep the power cord away from high traffic areas
where it may pose a tripping hazard.
！Avoid the use of an extension cord, which may overheat and cause a fire.
When transporting or storing the unit, keep it in a dry location, free from dust, excessive vibration or other
factors, which may damage the unit.
！Do not operate any oven with a damaged cord or plug or after the heater malfunctions, has been
dropped or damaged in any manner. Return oven to authorized service facility for examination, electrical
or mechanical adjustment, or repaired.
！If the supply cord is damaged, it must be replaced by a special cord or assembly available from the
manufacturer or its service agent.
！Use this oven only as described in this manual. Any other use not recommended by the manufacturer
may cause fire, electric shock, or injury to persons.
！This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
！Never add cold water to food on a hot universal tray or baking tray or directly onto food in a hot
oven. The steam created could cause serious burns or scalding and the sudden change in temperature
can damage the enamel.
！Do not lift the oven by the handle.
This appliance can be used by children aged from 8 years and above if they have been given supervision
or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
Cleaning and user maintenance shall not be made by children unless they are aged from 8 years and
above and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years.
Appliances canbe used by persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and if they understand the hazards involved.
Children shall not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard
WARNING: The appliance andits accessible parts become hot during use. Care should be taken to
avoid touching heating elements.
Children less than 8 years of age shall be kept away unless continuously supervised
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
5
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
During use the appliance becomes hot. Care should be taken to avoid touching heating elements inside
the oven.
WARNING: Accessible parts may become hot during use.
Young children should be kept away.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of the glass.
WARNING: Ensure that the appliance is switched off before replacing the lamp,to avoid the possibility
of electric shock.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that theydo not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard
HOW TO SAVE ENERGY
Using energy in a responsible way not only saves money but also helps the environment. So
let's save energy! And this is how you can do it:
！Do not uncover the pan too often (a watched pot never boils!)
Do not open the oven door unnecessarily often.
！Switch off the oven in good time and make use of residual heat.
For long cooking times, switch off heating zones 5 to 10 minutes before finishing cooking, this saves up
to 20% on energy.
Only use the oven when cooking larger dishes.
Meat of up to 1 kg can be prepared more economically in a pan on the cooker hob.
！Make use of residual heat from the oven.
If the cooking time is greater than 40 minutes switch off the oven 10 minutes before the end time.
Important! When using the timer, set appropriately shorter cooking times according to the dish being
prepared.
！Make sure the oven door is properly closed.
Heat can leak through spillages on the door seals. Clean up any spillages immediately.
！Do not install the cooker in the direct vicinity of refrigerators/freezers.
Otherwise energy consumption increases unnecessarily.
6
UNPACKING
During transportation, protective packaging was used to protect the appliance against any
damage. After unpacking, please dispose of all elements of packaging in a way that will not
cause damage to the environment.
All materials used for packaging the appliance are environmentally friendly; they are100% recyclable and
are marked with the appropriate symbol.
Caution! During unpacking, the packaging materials (polythene bags, polystyrene pieces,etc.) should
be kept out of reach of children.
DISPOSAL OF THE APPLIANCE
After the implementation of the European Directive 2002/96/EU in the national legal system,
the following applies:
Electrical and electronic devices may not be disposed of with domestic waste. Consumers are
obliged by law to return electrical and electronic devices at the end of their service lives to the
public collecting points set up for this purpose or point of sale. Details to this are defined by the
national law of the respective country. This symbol on the product, the instruction manual or
the package indicates that a product is subject to these regulations. By recycling, reusing the
materials or other forms of utilizing old devices, you are making an important contribution to
protecting our environment.
7
DESCRIPTION OF THE APPLIANCE
Baking tray Grillgrate (drying rack)
Rotisserie (Only for ES611TS)
Aside rack x 2 (Only for ES611TS)
8
Removable side racks: (Only for ES611TS)
When you need to clean the side racks or catalytic panels,please pull out foot 2first,then pull out foot 1.
After the side racks has been cleaned, you can install the side racks by following these steps.
1,Install the feet of side racks into the mounting holes of the catalytic panels, as shown Figure 1 and 2.
2,Install the feet of side racks into the mounting holes of the cavity,as shown Figure 3 and 4.
Please note:Insert foot 1(easy to insert) of the side rack into the mounting hole when installing,then hard insert
foot 2(clamping) of the side rack into the mounting hole.
Foot 1
Foot 1
Foot 2
Foot 2
Foot 1
Foot 2
9
INSTALLATION
！The kitchen area should be dry and aired
and equipped with efficient ventilation.
When installing the oven, easy access to
all control elements should be ensured.
！This is a built-in oven, and its back wall
and one side wall can be placed next to a
high piece of furniture or a wall. Coating
or veneer used on fitted furniture must be
applied with a heat-resistant adhesive
(100℃).This prevents surface deformation
or detachment of the coating.
！Make an opening with the dimensions
given in the diagram for the oven to be
fitted.
！Make sure the mains plug is disconnected
and then connect the oven to the mains supply.
！Insert the oven completely into the opening
without allowing the four screws in the places
shown in the diagram to fall out.
10
11
Electrical connection
Warning!
All electrical work should be carried out by a
suitably qualified and authorized electrician.
No alterations or willful changes in the electricity
supply should be carried out.
Fitting guidelines
The oven is manufactured to work with
three-phase alternating current.
The connection diagram is also found on
the cover of the connection holder.
Remember that the connection wire should
match the connection type and the power
rating of the oven.
The connection cable must be secured in a
strain-relief clamp.
Warning!
Remember to connect the safety circuit to the
connection holderterminal marked with .The
electricity supply for the oven must have a
safety switch which enables the power to be
cut off in case of emergency. The distance
between the working contacts of the safety
switch must be at least 3 mm.
Before connecting the ovento the power
supply it is important to read the information
on the data plate andthe connection diagram.
12
DESCRIPTION OF THE APPLIANCE (Only for ES611TS)
1Oven door handle 7 Confirm key
2 Reservation function key 8 Power key
3 Timer 9 Selection key
4 Clock 10 Child lock key
5 Descending key 11 Display
6 Increasing key
1
11
2
3765
4
10
9
8
13
Before first use
Remove packaging, clean the interior of the oven and the hob.
Take out and wash the oven fittings with warm water and a little washing-up liquid.
Switch on the ventilationin the room or open a window.
Heat the oven (to a temperature of 240℃,for approx,30 min.),remove any stains and wash carefully; the
heating zones of the hob should be heated for around 4 min.without a pan.
Important!
The inside of the oven should only be washed with warm water and a small amount of washing-up liquid.
OPERATION (ES606MB & ES606MS)
The oven can be warmed up using the bottom and top heaters, as well as the grill. Operation of the oven
is controlled by the oven function knob-to set a required function you should turn the knob to the selected
position.
Possible settings of the oven function knob
Separate oven lighting
By setting the knobto thisposition the lighting inside the oven is switched on, e.g. use when
washing the oven chamber.
Bottom and top heaters on
Setting the knob to this position allows the oven to be heated conventionally.
Grill
This function allows a higher temperature at the top of the cooking area, which causes more
intense browning ofthe dish and permits larger portions to be grilled.
This function allows a higher temperature at the top of the cooking area, which causes more
intense browning of the dish and permits larger portions to be grilled.
Grill
Bottom heater on
When the knob is set to this position,the oven is heated using only the bottom heater.Use for,
e.g.final baking from the bottom.
14
final baking from the bottom.
As well as the temperature regulator knob to set a required function you should turn the knob to the
selected position.
Set up oven cooking time; turn the knob to the selected position.
The oven can be switched off by setting both of these knobs to the position “OFF”.
Turn the knob to the "ON" position, and the timer is the function of standing "ON".
OPERATION (For ES611TS)
LED display
1. Turn On and off
Turn on: In shutdown mode, touch more than 3 seconds, then it will go into seg
mode.
Turn off: In standby or working mode, touch more than 3 seconds, then it will go into shutdown
mode.
Standby mode will display as below:
15
2. Set up clock (24 hours):
(1) In standby condition, touch once, hour flicker, reminding to set up.
(2) Touch or keys, set up hours (0-23), defaulted “00”.
(3) Touch once again, finish hour set up, the minute flicker, reminding to set up.
(4) Touch or keys, set up minutes (0-59). Defaulted “00”.
(5) Touch key once, clock setup finish, start to work. The “:” flicker once each second.
(Example: 12:30)
3. Function selection:as example (other functions are same way to set)
3.1、In standby condition, touch continuously, display shows as below diagram
(“XX”means flicker, others are bright).
16
Note: All above are default under its function condition.
3.2、After function selection, can set up temperature and working time as below:
a. Touch or , touch one, the temperature can increase (or decrease) 5℃/10℉,
temperature can be set between 40℃and 250℃. touch key.
b. Touch once, the hour flicker, touch or key, can set time between 0 and 9 hours.
c. Touch once again, minute flicker and touch or key, it can set up minutes between
0 and 59 minutes, touch key, it will start to work, other icon will not show.
For example: Working time set as 1:30 hours, temperate set as 200゜C.
d. Under condition of item 3.1 or item3.2, touch key, it will work as system defaulted or current condition.
condition.
Table 1
17
4. Set up child lock
(1) Lock: Touch and keys at the same time, keep touching more than 3 seconds
until “ ”icon shows in LED, it is locked, there is no function to touch any other keys.Example:
(2) Unlock: Touch and keys at same time, keep touching more than 3 seconds
till “ ” icon doesn't show, then it is unlocked.
5. Appointment function ( this function has to pre-set standard time)
After step 2 & 3 is set, touch once，the hour flicker, touch or key, can set time
between 0 and 23 hours.Touch once again, minute flicker and touch or key, it can
set up minutes between 0 and 59 minutes, touch key, it will start to work, other icon will not show.
5. How to set degrees Fahrenheit and degrees centigrade.
In temperature seg mode, touch and at the same It could be switchover
among degrees Fahrenheit and degrees cenrade.
18
CLEANING AND MAINTENANCE
By ensuring proper cleaning and maintenance of your cooker you can have a significant influence on the
continuing fault-free operation of your appliance.
Before you start cleaning, the cooker must be switched off and you should ensure that all knobs are set to
the “OFF” position.
Do not start cleaning until the cooker has completely cooled.
Caution! The sharp blade should always be protected by adjusting the cover (just push it with your
thumb).Injuries are possible so be careful when using this instrument-keep out of reach of reach of
children
!Appropriate lightcleaning or washing products are recommended, such as e.g. any kind of liquids or
emulsions for fat removal.In particular, using special products to wash and clean and maintenance. If the
products are not available, it is advisable to use a solution of warm water with a little washing-up liquid or
cleaning products for stainless steel sinks.
Oven
!The oven should be cleaned after every use. When cleaning the oven the lighting should be switched on
to enable you to see the surfaces better.
!The oven chamber should only be washed With warm water andsmall amount of washing-up liquid.
19
!After cleaning the oven chamber wipe it dry.
Caution!
Do not use cleaning products containing abrasive materials for the cleaning and maintenance of the
glass front panel
!steam cleaning﹡:
-pour 250ml of water (1 glass) into a bowl placed in the oven on the first level from the bottom
-close the oven door,
-setthe temperatureknobto 50℃,and the functionknob to the bottom heater position
-heat the oven chamber for approximately30 minutes
-open the oven door, wipe the chamber inside with a cloth or sponge and wash using warm water with
washing-up liquid.
Caution! Possible moisture or water residues under the cooker can result from steam cleaning
!After cleaning the oven chamber wipe it dry
Replacement of the oven light bulb
In order to avoid the possibility of an electric shock ensure that the appliance is switched off
beforereplacing the bulb
!Set all control knobs to the position“OFF”/ “STOP” and disconnect the mains plug
!unscrew and wash the lamp cover and then wipe it dry
!unscrew the light bulb from the socketreplace the bulb with a new one-a high temperature bulb
(300℃)with the following parameters:
-voltage 220~240 V~
-power 25 W
-Lamp type G9
!Screw the bulb in , making sure it is properly
inserted into the ceramic socket
!Screw in the lamp cover.
Oven light bulb
This manual suits for next models
2
Table of contents
