Legend Flame EF385A User manual

In Wall Recessed and Wall Mounted Electric
Fireplace
EF385A,EF286A,EF287A,EF288A,EF289A
OWNER’S MANUAL
WARNING
Read and understand this re owner’s manual, including all safety
in on, before plugging in or using this product. Failure to do so
could result in e, electric shock, or serious personal injury.
CAUTION
Keep this owner’s manual for future reference. If you sell or give this
product away, make sure this manual accompanies this product.
DO NOT RETURN!
Contact our customer service team for he
service5@ reand replaceservice.com
Call: 949-385-6588

CONTENT
1. Important Safety Infor on …………………………………..………........... 1
2. Technical Speci ons ………………………….…………………………………... 5
3. Before I on …………..…………………………….………….................... 6
4. I Inst ………………………...........................................
4a. Recessed into the Wall ………………………..................................... 11
4b. Hang on the Wall ………………………..............................................
15
5. Oper on Instru on ……………………………………................................ 20
5a. Manual Control Panel ……………..………………………….……............... 21
5b. Remote Control ………………………………......................................... 21
5c. APP Control ……………………………………......................................... 23
6. Care and Maintenance …………………….………..................................... 24
7. Limited Warranty …………………...……………………................................ 25
8. Troublesho ng Guide .................................................................... 26
9. Sche c Diagram …………………………………...................................... 29
9

-
-
FCC warning:
-
sible for compliance could void the user's authority to operate the equip
-
ment.
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
and can radiate radio frequency energy and, if not installed and used in
-Reorient or relocate the receiving antenna.
which the receiver is connected.
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
4

4
2. TECHNICAL SPECIFICATIONS
Electric Speci a ons
Model Volt
(min/max) Hz BTU(max) Amp Hea ng
Area(max)
EF385/EF286-289A 120 750/1500 60 5100 12.5 400 sq. .
Product Dimensions
A
C
E
F
H
D
B
G
EF286A
EF385A
Inch
Inch
40
37
5/8
30
11/16
33
5/64
18
29/32
14
3/4
5
25/32
18
7/64
5
19/32
18
29/32
14
3/4
5
25/32
18
7/64
5
19/32
38
37/64
31
21/32
mm 1016 956 480 375 147 460 142 980
mm 840 780 480 375 147 460 142 804
EF287A Inch 50
47
5/8
18
29/32
14
3/4
5
25/32
18
7/64
5
19/32
48
37/64
mm 1270 1210 480 375 147 460 142 1234
EF288A Inch 60
57
5/8
18
29/32
14
3/4
5
25/32
18
7/64
5
19/32
58
37/64
mm 1524 1464 480 375 147 460 142 1488
EF289A Inch 72
69
5/8
18
29/32
14
3/4
5
25/32
18
7/64
5
19/32
70
37/64
mm 1830 1770 480 375 147 460 142 1793
Model unit A B C D E F G H
5

5
3. BEFORE INSTALLATION
Note:
Keep the packaging (carton, rapping bag, etc.) for future
transporta on and/or storage.
If there is any problem or ques on, please contact the service team.
If the unit needs to be returned, please make sure all the spare parts
are packed inside, and packing as the same as the original packing.
Check Spare Parts
Open the packaging carefully and remove the polystyrene.
Check all the spare parts are fully received.
Carefully check if any damages that may have for the spare parts.
NOTE: Contact service team for help if there is any part missing or
damaged. Email to service5@ replaceservice.com or call 949-
385-6588.
Spare Part (C,D,E,F,L,M,N,O,P)
Trim
Firebox
Spare Part (G)
Spare Part (H,I,J,K)
6

6
A. B.
Firebox (1 pc)
NOTE: The wall mount bracket is
a ached ebox
by 4 screws.
Trim (1 pc)
C. D. E.
ST5x40 Wood Screw
(5 pcs)
8x40 Plas c Wall
Plug (5 pcs) ST4*40 Screw (4 pcs)
F. G. H.
Side screen panel
with magnets (2 pcs) Logs (1 set) Large Crystals (1 set)
7

In Wall Recessed and Wall Mounted Electric
Fireplace
EF385A,EF286A,EF287A,EF288A,EF289A
OWNER’S MANUAL
WARNING
Read and u nderstand this re owner’s manual, including all safety
in on, b efore plugging in or using this product. Failure to d o so
could result in e, electric shock, or serious personal injury.
CAUTION
Keep this owner’ s manu al for future ref erence. If you sell or give this
product away, make sure this manual accompanies this product.
DO NOT RETURN!
Contact our customer service team for he
service5@ reand replaceservice.com
Call: 949-385-6588
7
I. J. K.
Small Crystals (1 set)
Black Glass Chips
(1 set)
Small pumice stone
(1 set)
L. M.
.
N.
Small brush (1 pc) Remote Handset
(Plug 1pc ) (1 pc)
Owner’s Manual (1 pc)
Func Tes ng
Please refer to sec on 5a. Manual Control Panel and 5b. Remote Control
to test the appliance rst before installa on. Should any defects found,
please contact service team for help. E-mail
service5@ laceservice.com or call 949-385-6588.
O.
AAA Battery (2pcs)
8

4. INSTALLATION INSTRUCTIONS
Tools Required
A Phillips screwdriver, a drill and a hammer
Loca ng the appliance
Your new electric lace may be installed virtually anywhere in your
home. However, when choosing a loca on, ensure that the general
instruc ons for safety are followed.
8
or best results, install out of direct sunlight, water or very damp air.
Power supply service must be installed within proximity of electric
replace prior to nishing avoiding reconstruc on.
Minimum Clearance to Combus bles
Sides............................0 inch
Floor............................0 inch
Back.............................0 inch
Top (shelf or TV)..........8 inch min
Front...........................36 inch
WARNING! Risk of Fire! Keep electrical cords, drapery, furnishings or
other combus bles at least 3 . (0.9 m) from the front of the electric
replace.
Electrical Supply Circuit Requirements
Plan the loca on of the appliance so that it will have adequate electric
power. A 15AMP, 120V/60Hz circuit is required. Add al appliances on
the same circuit as this appliance may exceed the current ra ng of that
circuit. A dedicated circuit is not required, but is preferred to prevent
circuit breaker or fuse failure.
Prepare the outlet close to the right side of appliance. Make sure the
outlet is in good condi and the plug must be plugged ghtly in the
outlet.
9

For hard wiring, please refer to page 17.
9
Rem he temperature sensor from the rebox (if needed). You can x ove t
it on the outer surface of the wa easure the room temperaturell to m
more accurately he cabl 5cm long. T e is 9 .
1. 2.
1. 2.
3. 4.
NOTE: Compa ble mood lights are available from Legend Flame Group
LLC, other makes may not be suitable and will void warranty.
Connect mood light cable if needed as shown below ( ) .
10
7

4a. Recessed into the wall
4a.1. Build the framing by 2x6” stud, below picture of 50” as an example.
Dimensions for all sizes are listed below. The appliance will be
10
supported by the om framing, make sure the b om framing it
solid and level. Leave some gap behind the right stud for electrical
supply.
Model unit EF385A EF286A EF287A EF288A EF289A
A Inch 48 13/1638
986810 1240 1494 1800
13/1631 57/64 58 13/16 70 55/64
mm
4a.2. Prepare electrical supply.
4a.3. Fix the plasterboard to edge of the framed opening. Paint it or cover
it with wall paper to nish the wall. BUT ledger stone is NOT suitable.
11
2x6”stud
right stud
18 5/16”
6”
2”

11 10
4a.4. Unscrew at two sides and rear panel. Remove the wall mount
bracket from the rebox.
4a.5. Unscrew the glass brackets and take the brackets and the glass
out.
12

12
11
4a.6. Insert the rebox into the opening gently, make sure the front
surface of the bo om is at the same level of the surface of the
nishing wall. Use 4pcs ST4x screws to the rebox on the stud.
4a.7 th sides.
13

13 14

1413
4a.10. A ach the trim on ebox.
4a.11. Fully assembled.
4b. Hang on the wall
4b.1. Unscrew at two sides and rear panel. Remove the wall mount
bracket from the rebox like 4a.4.
4b.2. Choose a wall, put the bracket on the posi on where you want to
install the replace and mark the posi ons need to be drilled on the
wall.
Wall
Floor
Ceiling
m
i
n
10 inchmin 10 inch
Bracket
1
2
3
15

15 14
4b.3. Take away the bracket and drill 3pcs 40mm deep, holes on the
wall. Tap the plas c wall plugs into the holes. Secure the bracket by
3pcs ST5X40 screws.
If the wall is solid wood, it is no need to drill the holes on the wood
and use plas c wall plugs.
Wall
Floor
for concrete wall only
4b.4. Fit the slots in the back of rebox over the hooks on the bracket,
and carefully hang the rebox on the bracket. Then secure the
screws on both sides.
Wall
Floor
16

16
17