Legend LDVD5.1A User manual

MPEG 4
LDVD5.1A
DVD/DIVX PLAYER
USER'S MANUAL

The important safety instruction shall include where applicable, the following information
and warnings.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not usethis apparatus near water.
6) Clean only withdry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or any other
apparatus (including amplifiers) thatproduce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades withone wider than the other. A groundingtype plug has two blades and a third
grounding prong. The wide blade of the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and thepoint where they exitfrom the apparatus.
11) Only useattachments/accessories specified by themanufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus.When a cart is used, use caution when moving the cart/apparatus.
13) Unplug this apparatusduring lightning storms orwhen unused for longperiod of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damagedin any way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, doesnot operate normally, or has beendropped.
"CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.

The lightning flash with arrow head symbol within anequilateral triangle isintented to alert
the user tothe presence of uninsured "dangerous voltage" within the products enclosure that
may be ofsufficient magnitude to constitute arisk of electricshock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE
PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER
SERVICING TO QUALIFIED PERSONNEL ONLY.
CAUTION:
When replace the direct plug in power supply with a separable cord-connected power
supply.The replacementmust be exactduplicate or onerecommended by the manufacturer.
CAUTION:
TO PREVENTELECTRIC SHOCK. MATCH WIDE BLADEOF PLUG TO WIDE SLOT.
POWER-CORE PROTECTION
Power-supply cords should be coated so that they are not likely to be walked on or pinched
by items placed upon or against them. Paying particular attention to cords at plugs,
convenience receptacles andthe point wherethey exit fromthe product.
POWER LINE
An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can felt into such power lines or circuit.
When installing an outside antenna system, extreme care should be taken to keep from
touching such powerlines or from the product.
OVERLOADING
Do not overload the outlets extortion cords or integral convenience receptacles as this can
result in arisk of theelectric shock.
SERVICING
Do not attempt to service this product yourself as opening or removing covers, otherwise it
may expose you to dangerous voltage or other hazards. Refer all servicing to qualified
services personnel.

DAMAGE REQUIRING SERVICE
Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the followingcondition:
a) When the power-supply cord or plug is damaged.
b) If liquidhas been spilledor objects havefallen into the produc
c) If theproduct has beenexposed to rainor water.
d) If the product does not operate normality by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as an improper adjustment
of other controls may result in carnage and will often require extensive work by a qualified
technician to restorethe product toits normal operation.
e) If theproduct has beendropped or damagedin any way.
f) When the product exhibits a distinct change, a performance of this indicates a need for
service.
SAFETY CHECK
Upon completion of service or repairs to this product, ask the service technician to perform
safety checks todetermines that theproduct is in proper operating condition.
WALLOR CEILING MOUNTING
The product shouldnot be mountedto a wall or ceiling.
HEAT
The product shouldbe situated awayfrom heat.
READ INSTRUCTIONS
All the safetyand operating instructionsshould be read before the product is operated.
FOLLOW INSTRUCTION
All operating anduse instructions shouldbe followed.
CLEANING
Unplug this product from the wall counted before cleaning. The product should be cleaned
only with a potlahing cloth or a soft dry cloth. Never clean with furniture wax, benxns,
insecticides or othervolmtie apulds sincethey may corrode the cabinet.
ATTACHMENTS
Do not use attachments not recommended by the product manufacturer as they may cause
hazards.

ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may
tail, causing serious injuryto a child oradult and serious damageto the product. Useonly with
a cart, stand, tripod, bracket or table recommended by the manufacturer. A product and cart
combination should be movedwith may cause theproduct and cart combinationto overturn.
CART
A product and cart combination should be moved with care. Quick stops, excessive force, and
unravel surfaces may causethe product and cartcombination to overturn.
VENTILATION
Slots and openings in the cabinet are provided for ventilation and to ensure operation of the
product and to protectit from overheating.And these openings must not be blocked or covered.
The openings should neverbe blocked by placingthe product a bed,sofa rug or other.
LOCATION
The appliance should beinstalled in stable location.
NONUSE PERIODES
The power cord of the appliance should be unplugged from the outer when left unused for a
long period of time.
GROUNDING OR POLARIZATION
This product may be equipped with a polarized alternating current line plug ( a plug having
one blade wider than the other) This plug will fit into the power outlet only one way. This is a
safety feature. You are unable to insert the plug should still rail to fit. Contact your electrician
to not detect thesafety purpose of thepolarized plug.
WATER AND MOISTURE
Do not use this product near water for example. Near a bathtub, Wash bowl, Kitchen sink or
laundry tub. Ina wet basementor near aswimming pool and the like.
The DVD player contains laser devices. The top cover of the DVD module acts as a
protective housing. Laser radiation is dangerous when the top cover is removed or opened.
Avoid direct exposure tobeam during serviceor repair.

Please carefully check if all these following attachments are all ready after opening the
gift box. Ifnot, please consultwith agency orretailer.
1
10

DVD player is an advanced appliance for home entertainment and learning. Its various
indicators are far superior to any other video playing devices. Its output video is sharp and
real. It can provide Dolby Digital (5.1 channel) sound with high fidelity, surround effect .
The player can play many different formats of discs, such as DVD, super VCD, DVCD, CD,
MP3.
Full Compatibility: It is fully compatible to all types of discs such as DVD, Super VCD,
DVCD, CD, MP3.
Operation Hints in Different Languages: Operation hints can be switched between
Chinese and othersso as tofacilitate the operationfor the clients at home and abroad.
Picture with High Fidelity Resolution: Horizontal resolution as 500 dpi. It can make full
use of theadvantages of largescreen TV based on the fidelity of normal TV.
Hi-Fi Sound: DolbyDigital 5.1 Channelsurround sound.
With DolbyDigital 5.1 Channel Surround Sound, users can enjoy 3D listening.
Subwoofer can evenboost the bass sound effect. However, whether the DVD player can
play Dolby Digital Surround depends on whether the audio signal of the disc s recorded
according to Dolbydigital format.
Supporting Many Types of Different Languages: DVD discs can support captions in as
many as 32different types oflanguages and dialoguesin 8 languages.
Many angles of Enjoyment: Users can enjoy the picture from different angles selected
such as zoomin, side view, panorama etc.
Many Types of Picture Ratio Modes: These modes enable the DVD player to suit different
TV screens.
Manufactured under licensefrom Dolby Laboratories.
"Dolby" and thedouble-D symbol aretrademarks of DolbyLaboratories.
2

D I G I T A L
SURROUND
POWER
R/L
Progressive SCAN
LDVD5.1A
MPEG4
3
3
4
4
5
5
6
6
7
7
3
14
7
18
6
13
512
3
10
9
2
411
CLASS 1 LASER PRODUCT
APPAREILA LASER DE CLASS 1
PRODUCT TO LASER CLASS 1
CUS
LISTED
U
L
R
AUDIO/VIDEO
APPARATUS
FDA/DHHS
MODEL
POWER
LOSS
LDVD5.1A
90-240V~ 50/60Hz
25W
C-tick N1186
~90-240V
50/60Hz
COA/VIDEO OUTPUTCOA/VIDEO OUTPUT
DIGITAL
AUDIO OUT
DIGITAL
AUDIO OUT
5.1CH AUDIO OUTPUT5.1CH AUDIO OUTPUT
FLFL FRFR
SLSL SRSR CENCEN
SUBSUB VIDEOVIDEO
S-VIDEOS-VIDEO
MLML MRMR OPTICALOPTICAL
COAXIALCOAXIAL
CrCr CbCbYY
MIX OUTPUTMIX OUTPUT
41 2 3
5
6
7 8
910
1112
13
14

10
4

Once your DVD player is connected with your TV and the power supply plugs of various
devices have been plugged into the power sockets, and the batteries have already been
inserted into theremote control, youare ready to operate the DVD player.
Turn onthe power supply to the TV.
1. Press POWERbutton on DVDplayer to turnon power.
Wait a moment and switch the TV to the relevant video input mode (VIDEO IN) with the
TV remote control.
2. Press OPEN/CLOSE button on the player or press button on the remote control to eject
the disc tray.
When the tray is automatically ejected, place the disc in the tray with the label side facing
up (see thefollowing). You can onlyplace one disc each time.
3. Press PLAY button
The player will retract automatically the tray and start reading the disc, recognize the
different format automatically and display the results on the VFD in the front panel of the
player. Then the player starts the playback of the disc content automatically. If content or
menu appears, you can use the UP, DOWN, LEFT, RIGHT buttons on the remote control to
specify the items to be played, then press ENTER button to start the playback or select
directly with numbers.
Press MUTE buttonto turn offthe audio outputof the player.
Press MUTE buttonagain to turnit on.
During the playback,press VOLUME+ orVOLUME- button to adjust the volume of the
player.
During playback, press PAUSE button to pause theplayback, press PLAY or PAUSE to
resume play.
5

1. Press OPEN/CLOSEbutton,
The playback will end. Wait for thetray to eject and take outthe disc.
2. Press OPEN/CLOSEbutton to closethe tray.
3. Press POWERbutton to turnoff the power supply tothe player.
Notes:
(1) If the screen is not full or the edges are covered or there is black and white image
during the playback, please make the system setup by selecting the relevant TV signal
format (PAL OR NTSC).
(2) When the symbol appears on the TV screen, it means the operation made by the
user is noteffective or not acceptable bythe player.
In the following sections the frequently used operations are introduced according to the
types of functions. Besides the functions and operations of the buttons are introduced in
page 13.
Press MENU or TITLE to call the menu on the DVD and select a certain portion to play. The
detailed operation areas follows:
1. Press MENUbutton
Amenu appears and the select contents
2. Press UP, DOWN, LEFT, RIGHT button
Move the symbolto the specifieditem or picturewith these button.
3. Press ENTER button to select the items at this time the next submenu may appear,
otherwise the
specified contents will be played automatically. For the submenu operation, first select
the contents
with UP, DOWN, LEFT, RIGHT, then pressENTER button.
During the playback, you can press FWD to realize the fast forward playing. There are
totally five fast speeds. Every press increases the speed by one step. When the fast forward
reaches the maximumspeed, press FWD again to returnto normal playback.
During the playback, you can press REV to realize the fast reverse playing. There are
totally five fast speeds. Every press increases the speed by one step. When the fast reverse
reaches the maximumspeed, press REV again to returnto normal playback.
During the playback, you can press SLOW to realize the slow motion playing at different
speeds. There are forward and reverse for which there are three speeds. Pressing it once the
slow motion speedvaries and pressing"PLAY/PAUSE" will returnto playing.
6

With DVD,press MENU buttonto call thelist of trackson the disc, then you can press UP,
DOWN button toselect the tracks,then press ENTERbutton to play.
With nonDVD discs, whenPBC is on,press PLAY button,the list oftracks will appear, then
you can inputthe track numberdirectly to play.
Youcan switch thestate of PBCby pressing PBCbutton.
Notes: Whether theabove operation iseffective differs from disc todisc.
With DVDdiscs
1. Press TIME button
2. Press the number button to input the specified chapter or time. The time format input is
"hour hour minuteminute second second".For example, ifyou like tomove to thepoint at 38
minute 5 secondto play,just input 003805.
3. Press ENTERbutton.
The player startsto play fromthe point ofthe input time.
With VCD (or nonDVD ) discs
Press once TIME button
Press number buttons to input the specified time. The time format input is "minute minute
second second". Forexample, if you would like to move to the point at 5 minute 25 secondto
play, justinput 0525.
With DVD,you can pressSUBTITLE button toselect the language types, such as Chinese,
English etc. Eachpressing toggles betweenone caption languagecodes.
During the playback,press REPEAT continuously toselect different repeatcontents to play.
With DVDdiscs
Press once REPEAT button to repeat "Chapter".
Press twice REPEAT button to repeat "Title".
Press three timesREPEATbutton to cancel the repeat play.
With othertypes of discs (when PBC is off)
Press once REPEAT button to repeat asingle track.
Press twice REPEAT button to repeat thefull disc.
Press three timesREPEATbutton to cancel the repeat play.
1.When PBC isoff, press PROGRAM button
The following figurewill be displayedon the TVscreen, waiting forthe user toprogram.
7

2. Press the number button to input the track or chapter codes. For example, if an user would
like to play chapter 5 on the disc, then play chapter 4 finally chapter 2 , just press the
number buttons "5"and "4" and "2", (you can press "CLEAR" button to cancel the number
input).
3. Press PLAY button
The player willplay in theorder specified bythe user.
When playing VCD/SVCD/CD/MP3, if PBC is off, you can press directly the number button
corresponding to thetrack number toplay it. If the track number is over 10,you need topress
first 10+ button, then press the corresponding number. For example, if you would like to
select "21", firstpress twice "10+"button, then press"1" button again.
MP3 discs area new typeof disc witha record ofMP3 format audiotrack. The player
supports MP3 andthe specific operationsare as follows.
Press OPEN/CLOSE buttonto eject thetray. Placethe MP3 disc, press OPEN/CLOSE button
to retract thetray and theTV screen will display the menu.(see picture 1)
Press EQ buttonto turn ondigital equalizer.(VCD/SVCD/CD/MP3)
1. Press EQone time, andcurrent 3D surroundmode info willshow on theTV screen, press
RIGHT button to choose EQ .(see picture 2)
2. Press UP,DOWN button to choose STANDARD CLASSIC ROCK JAZZ POP
USER modes.
3. Press ENTERbutton to confirmsetup above.
4. Press EQbutton to exit.
8

Press SETUP button, the screen will display the following system setup menu. At this time
press UP, DOWN buttonto move the blue band to the specified menu, press ENTER button to
show the submenu. In the submenu, you can press RIGHT button to enter a submenu on the
right hand corner on the screen. Please note that under each menu state, you can move the
blue band with UP, DOWN button. Press ENTER to make the selection effective. Press the
LEFT button to exit the submenu on the right hand corner of the screen. At any time press
SETUP button to exit the system setup.
The following are examples of the common setup. Users are master the method so as to
setup other devices.
9
1.Press SETUP button so that system will be display on the TV screen and make surethatthe
blue band locatesSYSTEM SETUP.Press ENTER butonso that thefollowing figure will
show on theTv screen.
The yellow band locates the current item
.
TV SYSTEM
SYSTEM SETUP
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
SCREEN SAVER
TV SYSTEM
SYSTEM SETUP
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
SCREEN SAVER ON
OFF

1. Press SETUP button so that the system setup menu appears on the TV screen. Press
DOWN button tomove the blueband to SPEAKERSETUP and press ENTER button with the
following picture appearon the TV screen.
2. Press RIGHTbutton to enter submenu on the right hand corner of the screen. If you would
like to setup the sound mode to be STEREO, first press DOWN button to move the blue band
to locate theSTEREO, then pressENTER button.
Set up 5.1 Channel output might need two steps, namely to to turn off MIXED OUTPUT
MODE and turnon each speakeroutput channel.
DOWNMIX
SPEAKER SETUP
BASS MODE
CENTER DELAY
REAR DELAY
EXIT SETUP
SUBWOOFER
LT/RT
STEREO
VSS
5.1CH
10
Note: When SCR Saver is ON, screen saver picture will appear under non-work condition.
When SCR Saveris OFF, there willbe no screensaver function.
2. Press RIGHT button to enter the submenu on the right hand corner of the screen. If you
would like to setup the SCR SAVER to be OFF, press the button to locate the blue band on
OFF, then press ENTER button.
3. Press SETUPbutton to exit the system setup.

Step 2: Toturn on eachvarious speaker outputchannel. The operations are asfollows:
1. The operation is thesame as theprocedure 1 ofthe first step.
2. Press DOWNto locate theblue band onCENTER and thescreen changes asfollows:
Step 1: To turn off mixed output mode (if the mode has been turned off, the step can be
ignored). The operations are asfollows:
1. Press SETUP button so that the system setup menu appears on the TV screen. Press
DOWN button tomove the blueband to SPEAKERSETUP and press ENTER button with the
following pictures apearon the TV screen.
2. Press RIGHTbutton to enterthe submenu onthe right handcorner of thescreen.
Press DOWN button to move the blue band to locate the 5.1CH, then press ENTER button.
Finally press SETUPbutton to exitthe system setup.
DOWNMIX
SPEAKER SETUP
BASS MODE
CENTER DELAY
REAR DELAY
EXIT SETUP
SUBWOOFER OFF
ON
DOWNMIX
SPEAKER SETUP
BASS MODE
CENTER DELAY
REAR DELAY
EXIT SETUP
SUBWOOFER
LT/RT
STEREO
VSS
5.1CH
11

3. Press RIGHT button to enter the submenu on the right of the screen. If you would like to
change the age control grade to 1, hold UP button pressed until the blue band locates 1 G,
then press ENTERbutton.
4. Input thepassword 0000 .
5. Press SETUPto exit thesystem setup.
DVD discs with genuine copyright, parents are entitled to forbid those contents not suitable
for children. The operations toset up theparental guide areas follows.
1. Press STOPbutton so thatthe player is in stop mode.
2. Press SETUP button so that system setup menu displays on the TV screen, hold DOWN
button pressed until the blue band moves to SYSTEM SETUP, then press ENTER button,
press DOWN button until the blue band moves to RATING item with the TV screen displays
as follows:
3. Press RIGHTbutton to enterthe submenu onthe right handcorner of thescreen.
Make sure theblue locates theON, then pressENTER button.
4. Press LEFTbutton to exitthe submenu onthe right handcorner of thescreen.
Press DOWN buttonto allow theblue band to locate REAR, press RIGHT button to enter the
submenu on the right hand corner of the screen. Make sure the blue locates the ON, then
press ENTER button.
5. Press LEFTbutton to exitthe submenu onthe right handcorner of thescreen.
Press DOWN button to allow the blue band to locate SUBWOOFER, press RIGHT button to
enter the submenu on the right hand corner of the screen. Make sure the blue locates the ON,
then press ENTERbutton.
6. Finally pressSETUP buttonto exit thesystem setup.
12
TV SYSTEM
SYSTEM SETUP
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
SCREEN SAVER
1 G
2
3 PG
4 PG 13
5
6 R
7 NC-17
8ADULT

Listed in this chapter are the functions of the remote control buttons and their methods of
operations so that the user can refer to them for reference. Please refer to the relevant
sections in chapter4 and 5for the detailedoperations of most buttons.
11.1 PLAY/PAUSE button
When the player is in the state of stop, pause, slow motion, fast forward, fast reverse,
pressing PLAY button can resume the player to normal playback. When the player is in
playback mode (including slow motion play, fast forward, fast reverse), pressing
PLAY/PAUSE button can resume the normalplayback.
11.2 PROGRAMbutton
Depending on the type of disc, pressing PROGRAM button can change the track playing
sequence.
11.3 CLEARbutton
When inputting the code for program playback, pressing CLEAR button can cancel the
input number.
11.4 TITLEbutton
Pressing TITLE button can display the selectable title menu contained in the DVD disc.
In the menu picture, you can move the UP, DOWN, LEFT, RIGHT button to locate the
specific item, thenpress ENTER button to specify the playing content (it can be submenu, in
this case continueoperating with UP, DOWN, LEFT, RIGHT and ENTER buttons.)
11.5 MENUbutton
When playing a DVD disc, pressing the button can appear the menu contained in the side
(effectiveness depends on the type of disc). When PBC is off, pressing the button in stop
mode can browsethe contents ofdisc.
11.6 PBCbutton
Pressing the button switches the PBC state, with VCD 2.0 discs, when PBC is off, during
the playback, pressPBC to turn on PBC.
11.7 OSD button
Pressing OSD buttonwill display themessage about theplay.
11.8 FAST FORWARD BUTTON
Pressing the button will play the disc in slow motion without sound. Each press changes
the fast reversespeed until itresumes the normalplayback.
11.9 FAST REVERSE button
Pressing the button will play the disc in slow motion without sound. Each press changes
the fast reversespeed until itresumes the normalplayback.
11.10 PREVIOUSbutton (depends on the format of the disc)
When playing a DVD disc, pressing this button can jump back to play the previous
chapter. With SVCD and other types of disc, pressing the button can jump back to play the
previous track.
11.11NEXT button (effectivenessdepends on the type of disc)
During DVD playback, pressing the button can jump to the playback of next chapter. In
stop mode canbrowse the contentsof disc, pressingthe button canskip to the next track.
11.12 SLOWMOTION PLAY button
Pressing the button will play the disc in slow motion without sound. Slow motion play
can be performed forward or reverse. Each press changes the slow motion play speed until it
resumes the moralplayback.
13