Legend L4210 User manual

L4210
1-866-96-LEGEND
24 hours a Day/ 7 Days a week.

Contents
Safety and warnings...................................................................................... 2-4
Introduction................................................................................... ..............5
Installation.................................................................................................. 6-9
R
Operation.....................................................................................................11-14
Trouble Shooting.......................................................................................... 15
emote Control............................................................................ ..............10

-2-
SAFETY AND WARNINGS
1.Read these safety instructions.
2.Keep these safety instructions.
3.Heed all warnings.
4.Follow all safety instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in
accordance with the manufacturers instructions.
8.Do not install near any heat sources such as radiators ,
stoves, or other apparatus (including
9.Protect the power cord from being walked on or
pinched particularly at power outlets, and the point
where they exit from the apparatus.
10.Only use attachments/accessories specified by the
manufacturer.
11.Unplug this apparatus during lightning storms or
when unused for long periods of time.
12.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture , does not operate n
13.Apparatus must not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, should
amplifiers)that
produce heat.
ormally,
or has been dropped.
be placed on the apparatus.
IMPORTANT SAFETY INSTRUCTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
CAUTION
The symbol indicates that dangerous voltages
constituting a risk of electric shock are present
within this unit.
The symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
To prevent fire or shock hazard, do not expose this
appliance to rain or moisture.
WARNING:

-3-
High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
SAFETY AND WARNINGS
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Do not trap the power supply cord under the television
receiver.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual , and damage
to the television, may result if it falls.
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.
Dim:515*320mm(
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.

-4-
Thank you very much for purchasing this TV. To enjoy
your product from the very beginning, read this manual
carefully and keep it handy for easy reference.
INSTALLATION
CAUTION
Locate the TV in the room where light does not strike
the screen .
Total darkness or a reflection on the picture screen can
cause eyestrain. Soft and indirect lighting is recommended
for comfortable viewing.
Allow enough space between the TV and the wall to
permit ventilation.
Avoid extremely warm locations to prevent possible
damage to the cabinet or premature component failure.
This TV can be connected to AC 100-240 Volts. 50/60 Hz.
Never connect to a DC supply or any other power supply.
Do not cover the ventilation openings when using the TV.
directly
Never tamper with any components inside the TV, or any
other adjustment controls not mentioned in this manual.
All LCD-TVs are high voltage instruments. When you
clean up dust or water drops on the LCD PANEL or
CABINET, the power cord should be pulled out from the
receptacle, then wipe the TV with a dry soft cloth. During
thunder and lighting, unplug the power cord and antenna
cord to prevent damage to your TV. All repairs to this TV
should only be performed by qualified TV service personnel.
Earthing connection--- The apparatus shall be connected
to MAINS socket outlet with a protective earthing connection
MAINS plug or appliance coupler of the apparatus is used
as disconnect device, it should remains readily operable
SAFETY AND WARNINGS
Warning: Change or modifications to this unit not expressly
by the part responsible for compliance could void the user 's
authority to operate the Equipment.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected .
-Consult the dealer or an experienced radio TV technician
for help.
Shield cables must be used with this unit to ensure
compliance with the Class B FCC limits.

-5-
INTRODUCTION
Main features
Resolution: 1920x1080
Aspect Ratio: 16:9
TV System: ATSC Digital system and NTSC Analog system
Video Signal System:
Receiving Channel:
Input Power Voltage:
Power consumption: 300W
Audio Output Power(THD 7%): 2x8W
Main parameter
NTSC/PAL/SECAM
Cable :1-135/ Air: 2-69(ATV&DTV)
AC 100V-240V 50/60Hz
Analog RGB(VGA) Input x 1
Rear High-Definition Multimedia Interface(HDMI) Input x 2
Rear Composite Video Input x 1
Rear Audio Input x 3
Rear S-Video Input x 1
Side Composite Video Input x 1
Side HEAD PHONE Output x 1
Analog Audio Output x 1Rear
Rear Coaxial SPDIF Output x 1
Composite Video Input >=350
YCb(Pb)Cr(Pr) Input x 1
Rear Composite Video Output x 1
Horizontal definition(TV line)
Accessories
AC Power Cord......................... 1
Infrared Remote Control........... 1
User s Manual ........................ 1
Battery(AAA).......................... 2
Accessories
YCb(Pb)Cr(Pr) >=400
Video Input >=400
Viewing Picture Size(diagonal) 42inch
1920 x 1080 native resolution for Full-HD (1080p)
performance
Integrated ATSC TV tuner for HDTV broadcast reception
High brightness provides a vivid and brilliant picture
Deeper blacks and brighter whites with high contrast
Wide Screen aspect ratio (16:9) for a complete home
theater experience
HDMI input for true digital connection
VGA port for connection to PC
Built-in stereo speaker system
Full-function Remote Control

-6-
INSTALLATION
REAR AV Connection
Note:
1.AV1 and S-VIDEO share one audio channel.
2. When HDMI1 port get DVI signal, the PC Audio channel will change to receive the audio from HDMI1 port
3. When HDMI2 port get DVI signal, the YPbPr Audio channel will change to receive the audio from HDMI2 port.
4.AV OUTPUT :
When the source are AV1,AV2(side) S-VIDEO,ATV,the AV OUTPUT Channel reproduce the input
signals accordingly
11. OUTPUTSPDIF
12. AUDIO OUTPUT
13. ANT
14. AC POWER INPUT
1. HDMI1 INPUT
2. HDMI2 INPUT
3. VGA INPUT
4. AV1 INPUT
5. S-VIDEO INPUT
1
12
2 3 54 678 9 10 11 12 13 14
6. YPbPr INPUT
7. PC AUDIO INPUT
8. YPbPr AUDIO INPUT
9. AV1/S-VIDEO AUDIO INPUT
10. VIDEO OUTPUT
1 SOURCE
STANDBY :
6.HEADPHONE OUTPUT
7.VIDEO INPUT
8.AUDIO INPUT-L
9.AUDIO INPUT-R
Display the input source menu.
CH+ or CH- to select items .
press CH+ or CH- to
press VOL+ or VOL- to
Press this button to turn the unit ON
from STANDBY mode. Press it again to turn the set
back to STANDBY.
2MENUD
3 CH+/CH-:
4 VOL+/VOL-:
5.
isplay main MENU.
In TV mode press CH+ or CH- to
change the channel up and down.In MENU mode, press
In standby mode,
turn on the TV.
Adjust sound level.In MENU mode,
adjust the item that you
selected.
Front panel Side panel
1: Remote control sensor.
2: Indicator LED: GREEN POWER ON.
RED STANDBY.
3: Key board
3
1 2 3
4 5 6
7 8 9 0
+
CH
_
+
_
VOL
30 30
1
2
AC INPUT
100-240V~50/60Hz
SOURCE
MENU
CH+
CH-
VOL+
VOL-
STANDBY
HEADPHONE
Video
L
R
AV2
HEADPHONR
R
L
VIDEO

-7-
INSTALLATION
STEPS:
PC
Be sure both the TV and computer are set to Power off.
1.Connect VGA and audio cable.
2.Connect the power cord.
3.Power on the TV, switch to VGA mode.
4.Power on the VGA.
This sequence is very important.
PRESET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
720*400
640*480
640*480
640*480
800*600
800*600
800*600
800*600
1024*768
1024*768
1024*768
1280*1024
1280*1024
70
60
72
75
56
60
72
75
60
70
75
60
75
31.47
31.47
37.86
37.50
35.156
37.88
46.88
48.08
48.36
56.48
60.02
63.98
80.00
RESOLUTION V.Freq.(Hz) H.Freq.(KHz)
12
PC Audio
Power cord
VGA cable
AC INPUT
100-240V~50/60Hz

ANTENNA
Note:
Aerial connections:IEC(female).
Input impendance:75 unbalanced.
INSTALLATION
-8-

-9-
INSTALLATION
AV EQUIPMENT
This TV provides two groups of AV ,one S-Video,one group of YPbPr for convenient connection
to VCR,DVD or other video equipment,three group of HDMI for HD signal input Please refer to
the owner s manual of the equipment to be connected as well.
You can use the input terminals on TV set rear as follows.
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo
system, etc.....
YPbPr can support these video fomats:480i,576i,480p,576p,720p,1080i,1080p.
To audio
outputs
VIDEO EQUIPMENT
VIDEO EQUIPMENT with YPbPr
To audio Input
with S-video
Terminal
With VIDEO Input Terminal
TO VIDE O
Input
Black (s-video)
White(audol L)
Red(audio R)
Y/C
W
R
Y
W
R
R
W
W R
output
To s-video
GBR
GBR
Pr
Y
Pb
R
G
B
HDMI
Y
From Coaxial SPDIF
output
VIDEO RECORDER
Y
To audio
Output
With VIDEO
terminal
VIDEO EQUIPMENT
R
W
Y
output
To video
W R
WR
W
R
Y
WR
with SPDIF Input
terminal
Y
12
AC INPUT
100-240V~50/60Hz
HEADPHONE
Video
L
R
AV2

1
ENTER
23
456
789 0
+
CH
_
+
_
VOL
SLEEP P.G CC
S.M
EXIT
P. M
TV DISPLAY
SOURCE
MENU
MTS/SAP
MUTE
POWER
ASPECT
RECALL
CH LIST FAV EPG
1:
To set the TV standby or on.
2: :
For direct access to program.
3:
To display TV menu or to return to the previous menu.
4:
To move within the menu.
5:
Used to exit menu.
6:
To adjust sound level.
7: P
To switch picture mode.
8:
Switch the sound stereo, SAP and mono.
9:
Set time to turn off the TV.
10:
Setting the Parental Control level control.
11:
To disable or enable the sound.
12:
To access the previously viewed program.
13:
To display or exit TV input source menu.
14:
Confirms selection.
15:
Displays/removes the program Information
16:
To switch sound mode.
17:
To access the next or previous Program.
18:
To change picture aspect .
19:
Enable or disable the CC function.
20:
Usedtodisplaythechannellist
POWER
NUMBER KEY
MENU
CURSOR
EXIT
VOL+/-
.M
MTS/SAP
SLEEP
P.G
MUTE
RECALL
SOURCE
ENTER
TV DISPLAY
S.M
CH+/CH-
ASPECT
CC
CH LIST:
21: :
Used to access your favourite channels in digital TV mode.
22: :
Display all the information of DTV programs.
23.
Hot key directly go to HDMI source.
24:
Hot key directly go to SVIDEO source.
25:
Hot key directly go to TV source.
26:
Hot key directly go to AV source.
27:
Hot key directly go to YPbPr source.
28:
Hot key directly go to VGA source.
29:
In EPG mode, use this key to page up/down the EPG
information.
30. Reserved keys
FAV
EPG
HDMI:
SVIDEO:
TV:
AV:
YPbPr:
VGA:
PAGE DOWN/PAGE UP
COLOR KEYS:
REMOTE CONTROL
-10-
1
2
3
4
5
6
7
8
9
10
20
21
11
12
13
14
15
16
17
18
19
30
22
Insert Batteries Into the Remote Control
123
Remark:
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the
polarity (+ or -) of the batteries matches the polarity
marks inside the unit.
3. Mount the battery cover.
Replace with new batteries when the TV set begins
to show the following symptoms:
Operation is unsteady or erratic. Sometimes the TV
set does not function with Remote Control Unit.
1) Alkaline Battery Recommended.
2) Remove batteries when they are exhausted or if the
remote control is not to be used for long time.
TV AV SVIDEO HDMI
YPbPr VGA PAG E U P PA G E D OWN
EPG
25 23
26 24
27
28
29

OPERATION
-11-
The first item of the MENU is PICTURE MENU.
You can adjust picture effect here, such as contrast,
brightness, etc.
Press to select, press to adjust, press MENU
to exit.
2.AUDIO menu
The second item of the MENU is AUDIO MENU.
You can adjust sound here.
Press to select, press to adjust, press MENU
to exit.
Note:
If you want to adjust contrast, brightness, color,
and sharpness , the picture mode must return to
personal status.
Picture mode Standard
Contrast 50
Brightness 50
Color 50
Tint 0
Sharpness
Color Temp. Normal
50
Select Adjust Menu Exit
Sound mode Standard
Bass 50
Treble 50
Balance 50
Surround
AVC
Audio language English
Select Adjust Menu Exit
SPDIF Type PCM
Off
Off
Timer Setup P. G Channel
Audio Timer Setup Channel
P. G
1. PICTURE MENU 3.TIMER MENU
The third item of the MENU is TIMER MENU.
You can adjust time here.
Press to select, press to adjust, press MENU
to exit.
Sleep timer
Time zone
Daylight Saving Time
Clock
Select Adjust Menu Exit
1999/12/31 04:03PM
Pacific
Off
Off
Setup Channel
Timer P. G
1).Sleep Timer: adjust this item , you can set the
sleeptimer.
Note:
The item of Time zone, the item of Daylight Saving
Time and the item of Clock are available in ATSC
program
4. SETUP MENU
The forth item of the MENU is SETUP MENU.
You can setup system here.
Press to select, press to adjust, press MENU
to exit.
Menu language
Transparency
Aspect
Noise Reduction
Select Adjust Menu Exit
Weak
On
16:9
English
Advanced
XVS
Restore Default
Off
Closed caption
Setup Channel
Timer P. G
Note:
Restore Default: Reset all the settings to default
value.
Note:
The item of Audio language is available in ATSC
program.
Picture Audio
Picture
Picture
Picture
Audio
Audio

1). Advanced: In PC Mode is available.
(1).H-Pos:Adjust the horizontal position of the screen.
(2).V-Pos:Adjust the vertical position of the screen.
(3).Clock: Fine tune the screen width.
(4).Phase: Fine tune the phase of the screen. Usually
don`t adjust this item.
(5).Auto: Auto adjust to fit the screen.
Press button to select Advanced item , Press
button, the screen will display as follow:
OPERATION
2). Closed Caption: switch close caption mode.
(2):Option:Used to edit CC font.
Press button, the screen will display as follow:
-12-
Press button to select Closed Caption item,
Press button, the screen will display as follow:
H-pos
V-pos
Clock
Phase
Select Adjust Menu Exit
50
Auto
50
50
50
Setup Channel
Timer P. G
CC Mode
Basic Selection
Advanced Selection
Option
Select Adjust Menu Exit
Off
CC4
Service 3
Setup Channel
Timer P. G
Mode
Font style
Select Adjust Menu Exit
Custom
Default
Font size Default
Font Edge style Default
Font Edge color Default
FG color Default
BG color Default
FG opacity Default
BG opacity Default
Setup Channel
Timer
NOTE: Only ATSC program is available.
5. MENUP.G
The fifth item of the MENU is MENU.
You can setup here.
Press to select, press to adjust, press MENU
to exit.
PG
Parental Control
.
Parent Control: input the password, it will go into
menu. Factory default password
is 6666.
Parental Control
Enter password
Select Adjust Menu Exit
----
Channel
Timer Setup
5.1 .Input the correct password ,the screen will display
as follow:
Change password
Select Adjust Menu Exit
P.G switch On
US
Canada
RRT setting
Reset RRT
Channel
Timer Setup
1). Change Password: Press button, the screen will
display as follow:
New password
Select Adjust Menu Exit
Confirm password
----
----
Channel
Timer Setup
1).New Password: Input the new password
2).Confirm Password: Input the new password again
P. G
P. G
P. G
P. G
(1):Advanced Selection: only ATSC program is available.
AudioPicture
Picture Audio
AudioPicture
Picture Audio
Picture Audio
Picture Audio

OPERATION
5.2 PG
Parental Control
.switch:
When the switch is ON, the below
options can be adjusted.
5.3 US: Press button, the screen will display as
follow:
TV
Select Adjust Menu Exit
MPAA X
Channel
Timer Setup
1):TV: Press button, the screen will display as
follow:
TV rating
Select Adjust Menu Exit
ALLFVVS L D
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Block Press ENTER to lock or unlock
Channel
Timer Setup
And use ENTER key to switch lock/ unlock
feature.
Parental
Control
Rating Content
FV
(Fantasy
violence)
V
(Violence)
S
(Sexual
situation)
L
(Adult
language)
D
(Sexually
suggestive
dialog)
Suggested
age
TV-Y (All
children)
TV-Y7(Direct to
order children)
TV-G(General
audience)
TV-PG(Parental
Guidance
suggested)
TV-14(Parents
strongly
cautioned)
TV-MA(Mature
audience only)
X
X
X
X
X
X
X
X
X
X
X
X
Content
2).MPAA:switch the movie-rating control level: N/A,
G, PG, PG-13,R,NC-17,X.
Rating Description
Age
G General audiences, All Ages admitted
PG
Parental Guidance suggested. Some material may not be
Suitable for children.
PG-13 Parents strongly cautioned. Some material .may be
Inappropriate for children under 13.
R
NC-17
X
Restrict. Under 17 requires accompanying parent or adult
guardian(age varies in some jurisdictions)
No one 17 and under admitted.
X is an order rating that is unified with NC-17 but may be
encoded in the data of order movies.
5.4 Canada: Press button, the screen will be
displayed as follow:
Canada English
Select Adjust Menu Exit
Canada French
14+
E
Channel
Timer Setup
1): Canada English: switch the english rating control
level:E,C,C8+,G,PG,14+,18+.
Rating Description
Age
E Exempt: Includes news, sports, documents and other information
programming: talk shows, music videos, and variety programming.
C Children: Intended for younger children under the age of 8 years.
Pays careful attention to themes that could threaten their sense of
securityand well-being.
C8+ Children over 8 years old: Contains no portrayal of violence as the
preferred, acceptable, or only way to resolve conflict; nor encourage
children to imitate dangerous acts which they may see on the screen .
G General: Considered acceptable for all age groups, Appropriate
viewing for the entire family, contains very little violence, physical,
verbal or emotional.
PG Parental Guidance: Intended for a general audience, but may not be
suitable for younger children (under the age of 8) because it could
contain controversial themes or issues.
14+ Over 14 Years: Could contain themes where violence is one of the
dominant elements of the storyline
,
But it must be integral to the
devel opment of plot or character. Language usage could be profane
and nudity present within the context of theme.
18+ Adults: Intended for viewers 18 years and older and might contain
depictions of violence, which while related to the development of
plot, character or themes, are intended for adult viewing. Could
contain graphic language and portrayals of secretary and nudity.
-13-
P. G
P. G
P. G
Picture Audio
Picture Audio
Picture Audio

2).Canada French: switch the French-rating control
level: E, G,8ANS+,13 ANS+,16ANS+,18ANS+.
Rating Description
Age
E Exempt programming
G General :All ages and children, contains minimal direct violence,
but may be integrated into the plot in a humorous or unrealistic
manner .
8ans+ General but inadvisable for young children :May be viewed by a
wide public audience, but could contain scenes disturbing to
children under 8 who cannot distinguish between imaginary and
real situations. Recommended for viewing with parent.
13ans+ Over 13 years: Could contain scenes of frequent violent scenes
and in tense violence.
16ans+ Over 16 years: Could contain frequent violent scenes and violence.
18ans+ Over 18 years: Only for adult viewing. Could contain frequent
violent scenes and extreme violence.
OPERATION
5.6 Reset RRT: Press button, the screen will be
displayed as follow:
5.5 RRT Setting: in ATSC digital TV mode, it could be
adjusted
-14-
Select Adjust Menu Exit
Are you sure?
NO YES
Channel
Timer Setup
6. Channel MENU
The sixth item of the MENU is CHANNEL MENU.
You can adjust digital and analoge TV channel here .
Press to move, press to adjust.
Air/cable
Select Adjust Menu Exit
Auto Scan
Cable
Favorite
Show/Hide
Channel NO.
Channel Lable.
DTV signal :
2-1
Channel
Timer Setup
1). Air/Cable: select air TV signal or cable TV signal.
2). Auto Scan: If it's the first time using the TV, it
should scan all the TV channels first,
press the button to confirm, you will see below
menu :
Select Adjust Menu Exit
Start to scan
Channel
Timer Setup
A: Start to Scan: press the button to confirm, you
will see below menu which indicates auto search is
in process.
RF CH: 4
Select Adjust Menu Exit
FOUND: 0
Channel
Timer Setup
3). Favorite: Press button to choose/delete the
favorite channel .
4). Show/Hide: Press button to display or hide
currently channel.
5). Channel NO. :Display the currently channel number.
6). Channel Lable: Press button to edit currently
channel name.
7). DTV Signal: Display DTV signal intension. It can't be
selected and adjusted.
P. G
P. G
P. G
P. G
Picture Audio
Picture Audio
Picture Audio
Picture Audio

Picture Audio
Snow Noise antenna position, direction
or connection
Inspection Check
Interference Noise electronic equipment,car/
motorcycle,fluorescent light
Normal Picture Mute
Volume(check if mute is
activated or if the audio system
connections are not correct)
No picture Mute
Power cord is not inserted
Power switch is not opened
Contrast and brightness/volume
setup
Press standby key on the remote
control for inspecting
No colour Normal audio Colour control
Picture
breaking up
Normal audio
or weak
retune channel
No colour Noise TVsystem
Normal audio
antenna position, direction
or connection
Trouble shooting
Trouble phenomenon Symptom
Ghost
-15-
The LCDTV panel is built with very high precision technology giving you fine picture details
in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed
point of red, green, blue, black or white. Please note this does not affect the performance of
the product.

-1-

-2-

-3-
Dim:515*320mm(

-4--4-