Leica Geosystems mojoMINI User manual
SBAS Configuration
Version 2.0
English
Leica mojoMINI – SBAS Configuration 2
1Changing SBAS configuration
General information The mojoMINI automatically configures the GeoSpective smart antenna on first
connection. The configuration enables EGNOS for devices sold in Europe, WAAS for
devices sold in North America and disables SBAS for devices sold in all other regions.
Configuration files are available for download from Virtual Wrench if the configuration
needs to be updated or changed.
Prerequisites ■SD Card & SD Card reader
■smartag.btconfig file (download from www.virtualwrench.com)
Field guidance demo
mode
step-by-step
1. Insert SD Card in Card Reader.
2. Copy the smartag.btconfig file to the root directory
of the SD Card.
Leica mojoMINI – SBAS Configuration 3
3. Remove the SD Card from the Card Reader.
4. Insert SD Card in mojoMINI.
5. Turn the mojoMINI on using the slide switch and start
field guidance.
The configuration file will be copied from the
SD Card to the mojoMINI. The mojoMINI will
then configure the GeoSpective smart
antenna on every connection.
6. Turn the mojoMINI off using the slide switch and remove the SD Card.
Leica Geosystems AG
Heinrich-Wild-Strasse
CH-9435 Heerbrugg
Switzerland
Phone: +41 71 727 31 31
www.leica-geosystems.com
Leica mojoMINI – SBAS Configuration
Original text
© 2011 Leica Geosystems AC, Heerbrugg, Switzerland
Table of contents
Other Leica Geosystems GPS manuals
