Leitmotiv LM1897 User manual

We have designed our furniture with you,the customer in mind.Our clear,easy to follow step by
step instructions will guide you through the project from start to finish. Feel confident that this
will be a fun and rewarding project. The final product will be a quality piece of furniture that will go
together smoothly and give years of enjoyment.
30mins
Assembly Instructions
Assembly instruction
LM1897

2
Thank you for purchasing this quality product. This product has been
designed for easy assembly and constructed for durability. All parts were
checked prior to packaging to insure quality. Prior to beginning assembly,
however, make sure all parts and hardware are included and free of obvious
defect. If a part is missing or defective, please contact the service where
purchased.
1.Place out of direct sunlight so the color remains fresh and crisp .
2.Dust or wipe clean with a cloth dampened with water . Be sure not to leave water
spots on the surface . These water spots will dry and could possibly leave permanent
marks.
Care and Clean
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED

Before assembly
Tips before your start:
- Remove all wrapping material, including staples & packing straps before you start to
assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
3
QUICKFIT
CAM LOCK
When fitting cam lock, ensure starting position is correct before you insert connecting quickfit.
Quickfit head should be in
the centre of the cam lock
when the two panels are joined.
Cam lock should be inserted
before quickfit.
Turn cam lock clockwise to tighten.
Tighten quickfit until shoulder is flush with panel. Do not overtighten or undertighten.

4
10
11
12
13
14
1
2
3
4
5
6
6
7
7
8 x4
9
9
9
9
15

Part list
When unpacking, please be careful not to discard any parts with the packaging.
Before continuing,please make sure you have the following parts:
5
NO
12
4
6
8
Description Description
Qty Sketch
Top panel
Left side
panel
NO Qty Sketch
Right side
panel
Back panel
Bottom panel Cross Bar
Cross Bar
1 1
11
12
2 4
10
Wood bolck
11 1
1
4Drawer left
side panel
Leg
Drawer right
side panel
3
5
7
9
12 1
Drawer back
panel
14 1
Drawer front
panel
13 1
Drawer
bottom panel
15 1Cushlon

6
Hardware list
When unpacking, please be careful not to discard any parts with the packaging.
Before continuing, please make sure you have all of the following hardware:
(The hardware quantities listed above are required,For proper assembly some extra
hardware may have been included.)
Actual size
Screw for metal slider
Screw for wood bolck
Kx8
Wooden Dowel
Bx6 Cx10 Ix8
Nx8
Jx4
Ox8
x1 x1 x1 x1
Hx16
Cam Bolt
Ax6
Cam Lock Screw
Screw
Screw Screw
Mx8
Slider
(Left) (Right)
Slider
Flat shape for side panel
(Left) (Right)
Slider Slider
L Shape for drawer
1 2 3 4 5 6 7 8 9 10cm
Cx10
Hx16 (Ø4x25mm)
Screw Ix8 (Ø4x35mm)
Screw for
cross bar Ox8 (Ø4x45mm)
(Ø3x12mm)
Lx8
Bolt
Lx8
(Ø6x50mm)
Bolt
Floor Pads

7
Step 1
Step 2
6xC
Left
Right
4xA
C
C
C
Left
12
C
C
CC
C
C
3
A
C
C
C
Right

8
Step 3
Step 4
4xB
4xK
B
3
2
1
K
4

9
Step 5
Step 6
16xH
4xI
E
EE
E
E
8
6
6
7
7
I
5
2
1
4

10
Step 7
Step 8
8xO
8xL
8xN
8xM
O
L
N
M
L
N
M
4xJ
J
9
9
9
6
7
7

11
Step 9
Step 10
4xI
4xK
2xB
2xA
K
K
KK
A
A
B
I
14
10
10
11
11
12
13

12
Step 11
Step 12
10
11
12
Left
C
C
C
C
C
C
4xC
Left
Right
15