Lenovo ThinkVision P27q-20 User manual

P27q-20 Flat Panel Monitor
User’s Guide
Machine Type: 61EA

Product Number
61EA-GAR6-WW
First Edition (09 2019)
© Copyright Lenovo 2019
All rights reserved.
LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to
governmental entities as commercial items as defined by 47 C.F.R. 2.101 with limited and restricted rights to use, reproduction and
disclosure.
LIMITED AND RESTRICTED RIGHTS NOTICE: IF products, data, computer software, or services are delivered pursuant a
General Services Administration "GSA" contract, use, reproduction, or disclosure is subject to restrictions set forth in
Contract No. GS-35F-05925.
© Copyright Lenovo 2019 i

   
  
   
     
   
   
    
   
    
   
    
     
       
    
      
    
     
   
  
     
      
       
      
   
    
     
     
    
   
   
  
      
   
   
    
    
    
    

  
         
    

    
  
  
     
Contents
Product Number ............................................................................................................................................................................................................. i
Contents ......................................................................................................................................................................................................................... ii
Safety information..........................................................................................................................................................................................................iii
Safety and Maintenance Guidelines............................................................................................................................................................................. iv
Chapter 1Getting started.......................................................................................................................................................................................1‐1
Shipping contents...........................................................................................................................................................................................................1‐1
Notice for use..................................................................................................................................................................................................................1‐1
Product overview ...........................................................................................................................................................................................................1‐2
Types of adjustments.....................................................................................................................................................................................................1‐2
User controls ...................................................................................................................................................................................................................1‐3
Cable lock slot .................................................................................................................................................................................................................1‐3
Setting up your monitor ................................................................................................................................................................................................1‐4
Connecting and turning on your monitor ...................................................................................................................................................................1‐4
Registering your option .................................................................................................................................................................................................1‐6
Chapter 2Adjusting and using your monitor.........................................................................................................................................................2‐1
Comfort and accessibility ..............................................................................................................................................................................................2‐1
Arranging your work area..............................................................................................................................................................................................2‐1
Health Administration....................................................................................................................................................................................................2‐2
Accessibility information................................................................................................................................................................................................2‐5
Adjusting your monitor image......................................................................................................................................................................................2‐6
Using the direct access controls....................................................................................................................................................................................2‐6
Using the On‐Screen Display (OSD) controls...............................................................................................................................................................2‐7
Selecting asupported display mode......................................................................................................................................................................... 2‐10
Image rotation ............................................................................................................................................................................................................. 2‐10
Understanding power management........................................................................................................................................................................ 2‐11
Caring for your monitor .............................................................................................................................................................................................. 2‐11
Detaching the monitor stand..................................................................................................................................................................................... 2‐12
Wall Mounting (Optional) .......................................................................................................................................................................................... 2‐12
Chapter 3Reference information ..........................................................................................................................................................................3‐1
Monitor specifications ...................................................................................................................................................................................................3‐1
Troubleshooting..............................................................................................................................................................................................................3‐3
Manually installing the monitor driver ........................................................................................................................................................................3‐5
Service information........................................................................................................................................................................................................3‐7
Appendix A. Service and Support..............................................................................................................................................................................A‐1
Registering your option ................................................................................................................................................................................................ A‐1
Online technical support .............................................................................................................................................................................................. A‐1
Telephon e technical support ....................................................................................................................................................................................... A‐1
Worldwide telephone list............................................................................................................................................................................................. A‐1
Appendix B. Notices...................................................................................................................................................................................................B‐1
Recycling information ....................................................................................................................................................................................................B‐2
Collecting and recycling adisused Lenovo computer or monitor ............................................................................................................................B‐2
Disposing of Lenovo computer components..............................................................................................................................................................B‐2
Trademarks......................................................................................................................................................................................................................B‐3
Turkish statement of compliance .................................................................................................................................................................................B‐3
Ukraine RoHS ..................................................................................................................................................................................................................B‐3
India RoHS .......................................................................................................................................................................................................................B‐3
Power cords and power adapters ................................................................................................................................................................................B‐3
© Copyright Lenovo 2019
ii

Safety information
General Safety guidelines
For tips to help you use your computer safety, go to:
http://www.lenovo.com/safety
Before installing this product, read the Safety Information.
© Copyright Lenovo 2019 iii

Safety and Maintenance Guidelines
Important Safety Information
The power cord is designed for use with your monitor. To use a different cord, use only a power source and
connection compatible with this monitor.
WARNING: Always connect your monitor, the computer, and other equipment to a grounded (earthed) power
outlet. To reduce the risk of electric shock or damage to your equipment, do not disable the power cord grounding
feature. The grounding plug is an important safety feature.
WARNING: For your safety, be sure that the grounded power outlet you plug the power cord into is easily
accessible to the operator and located as close to the equipment as possible. To disconnect power from the
equipment, unplug the power cord from the power outlet by grasping the plug firmly. Never pull on the cord.
CAUTION: To protect your monitor, as well as your computer, connect all power cords for your computer
and its peripheral devices (such as a monitor, printer, or scanner) to a surge protection device such as a power
strip with surge protection or uninterruptible power supply (UPS). Not all power strips provide surge
protection; the power strips must be specifically labelled as having this ability. Use a power strip whose
manufacturer offers a damage replacement policy, so you can replace your equipment if surge protection fails.
CAUTION: A certified power supply cord has to be used with this equipment. The relevant national installation
and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl
chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall
be used. An alternative flexible cord is synthetic rubber.
Safety Precautions
■Use only a power source and connection compatible with this monitor, as indicated on the label/back plate
of the monitor.
■Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the
electrical outlet, and the total ampere rating of the products connected to the power cord does not exceed the
rating of the power cord. Look on the power label to determine the ampere rating (Amps or A) for each device.
■Install your monitor near a power outlet that you can easily reach. Disconnect the monitor by grasping the plug
firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.
■Do not allow anything to rest on the power cord. Do not walk on the cord.
■While using VESA mount application, the AC Inlet must face to down side. D
Maintenance Guidelines
To enhance the performance and extend the life of your monitor:
o not face any other position.
■Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not operating
properly or has been dropped or damaged, contact your Lenovo authorized dealer, reseller, or service provider.
■Adjust only those controls that are described in the operating instructions.
■Turn your monitor off when not in use. You can substantially increase the life expectancy of the monitor by using a
screen saver program and turning off the monitor when not in use.
■Keep your monitor in a well-ventilated area, away from excessive light, heat, or moisture.
■Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered.
Never push objects of any kind into cabinet slots or other openings.
■Unplug the monitor from the power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
■Do not drop the monitor or place it on an unstable surface.
■When removing the monitor base, you must lay the monitor face down on a soft area to prevent it from getting
scratched, defaced, or broken.
Cleaning the Monitor
The monitor is
a high-quality optical device that requires special care when cleaning. To clean the monitor, follow
these steps:
1. Turn off the computer and the monitor.
2. Unplug your monitor from the power outlet before cleaning.
CAUTION: Do not use benzene, thinner, ammonia, or any volatile substance to clean the monitor screen or cabinet.
These chemicals may damage the monitor. Do not use liquid or aerosol cleaners. Never use water to clean an LCD
screen.
3. Wipe the screen with a dry, soft, clean cloth. If the screen requires additional cleaning, use an antistatic screen
cleaner.
4. Dust the monitor housing. Use a damp cloth to clean the cabinet. If the cabinet requires additional cleaning, use a
clean cloth dampened with isopropyl alcohol.
5. Plug in the monitor.
6. Turn on the monitor and the computer.
© Copyright Lenovo 2019
iv

Chapter 1 Getting started
This User’s Guide contains detailed information on the ThinkVision
®
P27q-20 Flat Panel Monitor. For a quick overview,
please see the Setup Poster that was shipped with your monitor.
Shipping contents
The product package should include the following items:
● Information Flyer
● Flat Panel Monitor
● Monitor stand
● Monitor base
● Power Cord
● USB A-B Cable
● DP cable
● HDMI Cable(optional)
Notice for use
To setup your monitor, please see the illustrations below.
Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by
rough handling or excessive pressure.
1. Place your monitor with the screen face down on a soft flat surface.
2. Put the stand and base to the monitor.
Note: To attach a VESA mount, please see “Detaching the monitor stand” on page 2-12.
*: Depending on many factors such as the processing capability of peripheral devices, file attributes, and
other factors related to system configuration and operating environments, the actual transfer rate using
the various USB connectors on this device will vary and is typically slower than the data rates as defined
by the respective USB specifications: - 5 Gbit/s for USB 3.1 Gen 1; 10 Gbit/s for USB 3.1 Gen 2 & 20
Gbit/s for USB 3.2.
Chapter 1. Getting started 1-1

Product overview
This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock
slot.
Types of adjustments
Tilt
Please see the illustration below for an example of the tilt range.
Swivel
With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle.
Height Adjustment
After pressing the top of the monitor, you can adjust the height of the monitor.
1-2 P27q-20 Flat Panel Monitor User’s Guide

Monitor Pivot
- Adjust the monitor height before rotating the monitor screen. (Make sure that the monitor screen
ascent to its highest point and it inclines backward at 35°)
- Then rotate clockwise or anticlockwise until the monitor stops at 90°.
User controls
Your monitor has controls at the right side which are used to adjust the display.
For information on how to use these controls, please see “Adjusting your monitor image” on page 2-6.
Cable lock slot
Your monitor is equipped with a cable lock slot located on the rear of your monitor. Please follow
the instructions that came with the cable lock to attach it.
Chapter 1. Getting started 1-3

Setting up your monitor
This section provides information to help you set up your monitor.
Connecting and turning on your monitor
Note: Be sure to read the Safety Information located in the Flyer before carrying out this procedure.
1. Power off your computer and all attached devices, and unplug the computer power cord.
2. Connect one end of the DP cable to the DP connector on the back of the computer, and the other
end to the DP connector on the monitor. Lenovo recommends that customers who require using the
Display Port input on their monitor purchase the "Lenovo Display Port to Display Port cable
0A36537".
For more information, go to the following:
www.lenovo.com/support/monitor accessories
3. Connect one end of the HDMI cable to the HDMI connector on the back of the computer, and the other
end to the HDMI connector on the monitor. Lenovo recommends that customers who require to use the
HDMI input on their monitor purchase the “Lenovo HDMI to HDMI cableOB47070”.
For more information, go to the following:
www.lenovo.com/support/monitor accessories
1-4 P27q-20 Flat Panel Monitor User’s Guide

4. Connect one end of the USB 3.0 cable to the USB connector on the back of the computer, and the
other end to the upstream USB connector on the monitor.
5. Connect the speaker’s audio cable and audio jack of monitor to transfer audio source from DP, HDMI,
or USB.
Note: The audio output in DP and HDMI modes.
6. Connect one end of the USB cable to the USB downstream terminal of the monitor, and connect the
other end of the USB cable to an appropriate USB port on your device.
Note: The USB downstream port does not provide power while the monitor is switched off.
If there are any * tag, you can consult the comments on page 1-1.
Chapter 1. Getting started 1-5

7. Plug the monitor power cord and the computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant national
installation and/or equipment regulations shall be considered. A certified power supply cord not
lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation
H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used. Alternative a flexible cord be
of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm²) shall be used.
8. Assembled cables with Line Cleaner as shown below.
9. Power on the monitor and the computer.
10. To install the monitor driver, you must download it from Lenovo website，
(http://support.lenovo.com/docs/P27q_20) and follow the instructions on page 3-5.
Registering your option
Thank you for purchasing this Lenovo
®
product. Please take a few moments to register your product
and provide us with information that will help Lenovo to better serve you in the future. Your
feedback is valuable to us in developing products and services that are important to you, as well as
in developing better ways to communicate with you. Register your option on the following Web site:
http://www.lenovo.com/register
Lenovo will send you information and updates on your registered product unless you indicate on
the Web site questionnaire that you do not want to receive further information.
1-6 P27q-20 Flat Panel Monitor User’s Guide

Chapter 2 Adjusting and using your monitor
This section will give you information on adjusting and using your monitor.
Comfort and accessibility
Good ergonomic practice is important to get the most from your personal computer
and to avoid discomfort. Arrange your workplace and the equipment you use to suit
your individual needs and the kind of work that you perform. In addition, use
healthy work habits to maximize your performance and comfort while using your
computer.
Arranging your work area
Use a work surface of appropriate height and available working area to allow you to
work in comfort.
Organize you work area to match the way you use materials and equipment. Keep
your work area clean and clear for the materials that you typically use and place the
items that you use most frequently, such as the computer mouse or telephone, within
the easiest reach.
Equipment layout and setup play a large role in your working posture. The
following topics describe how to optimize equipment setup to achieve and maintain
good working posture.
Positioning and viewing your monitor
Position and adjust your computer monitor for comfortable viewing by considering
the following items:
●Viewing distance: Optimal viewing distances for monitors range from
approximately 510mm to 760mm (20 in to 30 in) and can vary depending on ambient
light and time of day. You can achieve different viewing distances by repositioning
your monitor or by modifying your posture or chair position. Use a viewing distance
that is most comfortable for you.
●Monitor height: Position the monitor so your head and neck are in a comfortable
and neutral (vertical, or upright) position. If your monitor does not have height
adjustments, you might have to place books or other sturdy objects under the base of
the monitor to achieve the desired height. A general guideline is to position the
monitor such that the top of the screen is at or slightly below your eye-height when
you are comfortably seated. However, be sure to optimize your monitor height so
the line of site between your eyes and the centre of the monitor suits your
preferences for visual distance and comfortable viewing when your eye muscles are
in a relaxed stated.
●Tilt : Adjust the tilt of your monitor to optimize the appearance of the screen
content and to accommodate your preferred head and neck posture.
●General location: Position your monitor to avoid glare or reflections on the
screen from overhead lighting or nearby windows.
The following are some other tips for comfortable viewing of your monitor:
●Use adequate lighting for the type of work you are performing.
●Use the monitor brightness, contrast, and image adjustment controls, if equipped,
to optimize the image on your screen to meet your visual preferences.
●Keep your monitor screen clean so you can focus on the screen’s contents.
Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to
periodically look away from your monitor screen and focus on a far object to allow
your eye muscles to relax. If you have questions on eye fatigue or visual discomfort,
consult a vision care specialist for advice.
2-1 P27q-20 Flat Panel Monitor User’s Guide

Health Administration
Prolong exposure to computer screens may cause temporary visual fatigue. Factors
including working environment, working habit and posture, screen flicker and blue light
contribute to this condition. To minimize visual fatigue certain adjustments can be made on
the work stations or using suitable computer screens with features that alleviate eye strain.
Environment
Visual fatigue is affected by the working environment. Glare reductions and appropriate
lighting situations help minimize this condition.
●Glare reduction
Glare can be reduced by
a) Changing position of any light source that is causing the glare.
b) Fitting the light sources with appropriate diffusers or lampshade.
c) Using curtains or blind on windows to minimize glare from direct sunlight.
d) Adjusting monitor position to be perpendicular to the source of light or windows.
e) Using an anti-glare screen - ThinkVision monitors have anti-glare surface treatment that
scatters light for a reflection-free work usage.
●Lighting
Adequate lighting is necessary to avoid glare and eye fatigue. Excessive or insufficient
lighting makes the display on screen harder to see. Generally, lighting level should not
exceed 750 lux and levels ranging from 300 to 500 lux are most appropriate for computer
desk work. Recommended lighting arrangement includes positioning work stations away
from direct sunlight or using overhead lighting with baffles or louvers that reduces glare.
Working Habits
Long exposures to computer screens may cause eye strain. Symptoms include headache,
burning eyes, blurred vision and discomfort. To minimize eye strain, computer users can
adjust working habits to let their eyes relax and recover.
●Break Times
Computer users should take some time away from the screen especially if working for
prolong hours. Generally, it is recommended to take short breaks (5 – 15 mins) after 1 –2
hours of continuous computer works. Taking short and frequent breaks is more advised
than longer breaks.
●Looking at Distant Objects
Users often blink less when in front of monitor screen. To minimize eye strain and dryness,
users should rest the eye periodically by focusing on objects that are far away.
●Eye and Neck Exercises
Certain exercise reduces eye strain and prevent early onset of musculo-skeletal disorders. It
is recommended to repeat these exercises often. However, should symptoms persists it is
recommended to consult a physician.
Adjusting and Using your monitor 2-2

Exercises for the eye:
1. Alternate looking up and looking down while keeping the body and head upright.
2. Slowly roll your eyes to look to the left and right.
3. Roll eyes to look at objects on the upper right corner and then on lower right. Do same
thing to look at objects on the upper left and lower left.
Exercises for the neck:
1. Relax arm at the side. Bend head forward to slightly stretch the neck. Hold for 5 seconds.
2. Relax arm at the side. Turn head to the right. Hold for 5 seconds. Then turn head to the
left.
3. Relax arm at the side. Swing head to the left. Hold for 5 seconds. Then swing head to the
right.
Working Posture
Appropriate working position helps minimize eye discomfort. Seating position and ideal
placement of monitor are essential for a comfortable working experience.
●Seating Position
Placing the monitor too far or too close may lead to eye strain. Far viewing distance causes
users to lean forward to see small texts, which strain the eyes and torso. Close viewing
distance, on the other hand, strains the eye resulting from exerting more effort to focus and
also causes the user to sit in awkward body
posture (i.e. tilting the head, typing with
outstretched arms, etc.)
Recommended viewing distance between the eye and the monitor screen is 1.5 x the diagonal
of the screen. Solutions in meeting this required distance in cramped office situations include
pulling desk away from wall or divider to make room for monitor, using flat panel or compact
displays placing the monitor in the desk corner, or placing the keyboard in an adjustable
drawer to create a deeper working surface.
ThinkVision monitors are design to maximize work space (e.g. having thin
profiles,
compatible for ThinkCentre Tiny back mount, practical cable management, etc).
2-3 P27q-20 Flat Panel Monitor User’s Guide

●Viewing Angle
Neck fatigue and pain may result from prolong turning of the head to see objects on the monitor
screen. To minimize this, position the monitor directly in front so the head, neck and torso face
forward to the screen. It is recommended that monitor should not be more than 35 degrees to the
right or left of the head.
Monitors should also not be placed too high or too low as this contributes to awkward posture which
results to muscle fatigue.
Reduce Flicker
Monitor flickers refer to repeated changes in monitor light intensity. It is caused by several factors
including but not limited to voltage fluctuations. Reducing flicker minimizes eye strain and
headaches. ThinkVision monitors allow users to use high frequency display modes that can
effectively reduce flicker.
Low Blue Light
Concerns on blue light affecting eye health have risen over the years. Blue light have
wavelength between 300 nm to 500 nm. The monitors have a factory setting that reduces blue
light emissions. Users can enable low blue light mode on these monitors from the OSD
settings.
1. Press to open the main OSD menu.
Adjusting and Using your monitor 2-4

2.Use or
press
to move among the icons. Select icon (Advanced Settings) and
to access this function.
3.Use or to move among the items. Select Scenario Modes and press to
access this function.
4. Select Low Blue Light and press to enable Low Blue Light.
Accessibility information
Lenovo is committed to providing greater access to information and technology to
people with disabilities. With assistive technologies, users can access information in
the way most appropriate to their disability. Some of these technologies are already
provided in your operating system; others can be purchased through vendors or
accessed at:
https://lenovo.ssbbartgroup.com/lenovo/request_vpat.php
2-5 P27q-20 Flat Panel Monitor User’s Guide

Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1 Direct access controls
Icon Control Description
DDC-CI Press and hold for 10 seconds to enable or
disable the DDC-CI function
Input change Switches the video input source.
Brightness Direct access to Brightness adjustment.
Main menu Open OSD main menu. Press and hold for
10 seconds will lock menu/un-lock menu.
Adjusting and Using your monitor 2-6

Using the On-Screen Display (OSD) controls
The settings adjustable with the user controls are viewed through the On-Screen Display (OSD),
as shown below.
To use the controls:
1. Press to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press to access that
function. If there is a sub-menu, you can move between options using or , then
press to select that function. Use or to make adjustments. Press to
save.
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD and allow
adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, press and hold the buttons for 10 seconds
to disable/enable DDC/CI function. The words " DDC/CI Disable/DDC/CI/Enable" shows
on the screen.
6. The ENERGY STAR option resets all user settings to default values so that the monitor can
meet the requirements of Energy Star.
Energy Star is an energy saving program for consumer electronics led by the U.S.
government. It was launched in 1992 by EPA and DOE to reduce energy consumption and
greenhouse gas emissions. Energy Star logo is a symbol of energy conservation and
environmental protection. It improves the concept of energy efficiency of consumers and
manufacturers, and effectively guides the market.
The regulation of Energy Star improves energy efficiency and reduces air pollution by
using more energy-efficient equipment in homes, offices and factories. One way to achieve
this goal is to use management to reduce energy consumption when products are not in
use.
The default settings for monitors conform to Energy Star certification. Any changes by
users for more features and functionalities may increase power consumption, which will
exceed the limitation of Energy Star’s standard. If the user changes the options related to
energy efficiency when using, such as brightness, color mode, etc., select All Reset Factory
or choose the Energy Star option, the power consumption will be restored to the energy
efficiency with Energy Star standard.
For more information, please refer to (www.energystar.gov/products). All products of
Energy Star will be posted online and can be accessed directly by governments, public
institutions and consumers.
2-7 P27q-20 Flat Panel Monitor User’s Guide

Table 2-2 OSD functions
OSD Icon on
Main Menu Submenu Description
Controls and
Adjustments
Brightness Adjusts overall brightness
Monitor Controls Contrast Adjusts difference between light
and dark areas.
Volume Adjust the volume level.
Dynamic Contrast
Enable dynamic contrast ratio.
●Off
●On
Over Drive
●Off
●Normal
●Extreme
Advanced
Settings
Color Mode
Adjusts intensity of red, green, and
blue.
●sRGB
●BT.709
●DCI-P3
●Neutral
●Reddish
●Bluish
●Custom…
Red: Increases or decreases the
saturation of ‘red’ in the image.
Green: Increases or decreases the
saturation of ‘green’ in the
image.
Blue: Increases or decreases the
saturation of ‘blue’ in the image.
Scenario Modes
●Panel Native
●Image Creation
●Digital Cinema
●Video Creation
●Low Blue Light
Aspect Ratio
Selects type of scaled image.
● Full Screen: Expand image to full
screen.
● Original AR: Ratio with input
signal.
Button Repeat Rate
●Off
●Default
●Slow
Adjusting and Using your monitor 2-8

OSD Icon on
Main Menu Submenu Description
Controls and
Adjustments
Port Setting
Input Signal
This monitor can accept video
signals through three different
connectors. Select digital among
OSD controls when you use
HDMI/DP connector.
●HDMI
●Display Port
USB
Charging
●Off
●On
DP Select ●DP1.1
●DP1.2
Daisy Chain ●Off
●On
Menu Setting
Language
Select OSD Language.
Note: The language chosen only
affects the language of the OSD. It
has no effect on any software
running on the computer.
Menu Time Out
Sets the length of time the OSD will
remain active after the last time a
button is pressed.
Menu Horizontal Changes the horizontal position of
the OSD.
Menu Vertical Changes the vertical position of the
OSD.
Transparency choose the transparency of OSD
Factory Reset
Resets monitor to the original
factory settings.
●Yes
●No
The ENERGY STAR Logo means
resets all user settings to default
values so that the monitor can meet
the requirements of Energy Star.
Exit / Exit OSD menu. /
*Low Blue Light Mode is reducing the blue light content.
*The use of Extreme Mode (response time) may result in reduced display quality when fast moving video graphics
are displayed.
Users should check Extreme Mode (response time) to verify if it is compatible with any applications they would like
to use it with.
2-9 P27q-20 Flat Panel Monitor User’s Guide