Lenovo ThinkVision P27q-30 Instructions for use

P27q-30 Simplified service manual for dismantling
Model Name: Lenovo P27q-30

Exploded Diagram

1. Precaution
PleasereadtheprecautionasfollowstopreventanydamagestotheLCDMonitor.
Makesureallpowerconnectorisremoved.BesurethattheLCDMonitorisinpoweroffstatus.
Preparesoftclothand
spongeasworking
platform
toplaceLCDmonitor
horizontally.
HoldLCDbytheside
carefullyandDON’Ttouch
or
presspaneldirectly.

2. Appropriate tools
SelecttheAppropriatetoolsfordisassemblyandre-assembly.
Phillipsscrewdriver(#2)
spacerscrewdriver
C/Ddisassemblytool
Glovesorsoftcloth

3. Disassembly SOP
Starting from the back of the
monitor, remove the stand assy
Remove the screw*4pcs
Tool : Screwdriver #2

Take off the tape and
disconnect the connector.
Take off the taype and the mylar.

Remove the screw*4pcs to remove
the Main board and the power
board.
Tool: Screwdriver #2
Remove the pins and boards
Remove the screw*16pcs and
disconnect the pins.
Tool : Screwdriver #2
Separated the panel and the
middle frame.

The panel
The middle frame
Disconnect the pins to remove the
key board and the LED board