Lenovo ThinkVision T23d-10 Instructions for use

1
T23d-10 Simplified service manual for dismantling
Model Name: Lenovo T23d-10

2
Exploded Diagram

3
1. Precaution
Please read the precaution as follows to prevent any damages to the LCD Monitor.
Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status.
Prepare soft cloth and
sponge as working
platform
to place LCD monitor
horizontally.
Hold LCD y the side
carefully and DON’T touch
or
press panel directly.

4
2. Appropriate tools
Select the Appropriate tools for disassembly and re-assembly.
Phillips screwdriver
(#2)
S
pacer screwdriver
C/D disassembly tool
Gloves or soft cloth

5
3. Disassembly SOP
Put the monitor on a flat surface
(Put the EPE under the monitor)
Pull out of stand
Remove the screw *4
pcs
Tool : Screwdriver #
Use the C/D disassembly tool to
release Rear cover hook from
disassemble hole on bottom

6
Remove all the foil and tape
Unplug LVDS line，lightbar line
and remove the K/P PCB
Remove the screw * 9
pcs
Tool : Screwdriver #
Take out the panel from bezel

7
Remove the mylar
Remove All screws*6pcs
Tool : Screwdriver #
Remove the side screw* pcs
Tool : Spacer screwdriver
Take out of the PCB