Lenovo ThinkVision T27hv-20 Instructions for use

T27HV-20 Simplified service manual for dismantling
Model Name: Lenovo T27HV-20

Exploded Diagram

1. Precaution
PleasereadtheprecautionasfollowstopreventanydamagestotheLCDMonitor.
Makesureallpowerconnectorisremoved.BesurethattheLCDMonitorisinpoweroffstatus.
Preparesoftclothand
spongeasworking
platform
toplaceLCDmonitor
horizontally.
HoldLCDbytheside
carefullyandDON’Ttouch
orpresspaneldirectly.

2. Appropriate tools
SelecttheAppropriatetoolsfordisassemblyandre-assembly.
Phillipsscrewdriver(#2)
spacerscrewdriver
C/Ddisassemblytool
Glovesorsoftcloth

3. Disassembly SOP
Starting from the back of the
monitor, remove the screw*4pcs to
remove the STAND-BASE ASS’Y
Tool: Screwdriver #2
Use disassembly tool to open all
the latches along the edge of the
Rear Cover.
Remove the screw*7pcs
Tool: Screwdriver #2

Disconnect the cables and the
tapes.

Remove the pins to remove the
Key board and the AUDIO board.
Remove the screw*13 to remove
the bezel and main frame.
Tool: Screwdriver #2

Remove the mylar
Remove the screw*3pcs to remove
the WEBCAM
Tool: Screwdriver #2
The Panel
The Bezel

Remove the screw*5pcs to remove
the main board and the power
board
Tool: Screwdriver #2
The main frame