LEOXZ XF1 PRO User manual

XF1 PRO | MANUAL
Injection moulded polyurethane grips
Construction made of metal and forging carbon fiber
Dashboards and LED bars are compatible with SimHub
4.3-inch IPS LCD with 800x480 pixels and 60 FPS
18 RGB LEDs with adjustable brightness and color
Optional non-contact clutch and optional paddles
70mm quick release holes and bolt holes

Notes
•Please read the user guide manual completely before installing or operating the racing wheel.
• This racing wheel has screen components, so it is important to avoid pressing the screen during use and minimize
contact with it.
•When connecting the racing wheel to the base, make sure that it is firmly attached before turning off the power.
•If using a USB connection, connect it directly to the PC instead of using a USB hub.
•Any modifications, disassemble, tampering, changes or unauthorized uses of the product will void the warranty.
•The racing wheel should not be used in wet or liquid environments and should be kept away from high
temperatures, low temperatures, and direct sunlight.
•The maximum input for the USB is 5V 1A.
•This racing wheel is designed for simulation use only.
•Leoxz is responsible for revising and explaining this manual, and reserves the right to make changes or corrections
to the information and explanation provided without prior notice and without any responsibility.
1

What's included
•XF1 Pro Steering Wheel
•USB-XS9 Cable
•Custom Stickers
•M3 Allen Key
•Nylon Tweezers
Note: The M3 allen key can only be used to adjust the paddle and remove the front knob for easy sticking of stickers.
2

USB Connection
XF1 Pro can only be connected via USB cable and requires a minimum input power of 5V 0.8A
to ensure proper operation. Otherwise, unexpected errors may occur.
The USB-XS9 cable will ensure a stable and reliable connection.
4
USB-XS9 Cable
Note: Make sure that the USB-XS9 cable is aligned
with the raised mark of the XS9 interface, otherwise it
will cause permanent damage to the socket if it is
inserted forcibly.

QR Installation
The XF1 Pro has 12 mounting holes with a diameter of 70mm for quick release installation,
including 6 through holes and 6 threaded holes. It supports a maximum diameter of 88mm for
the quick release.
Note: The length of the bolt that extends into the steering wheel should not exceed 6mm, it is recommended to use
M5X10 bolts. Using bolts that are too long may cause interference between the bolts and the PCB.
Through Holes
（6XΦ5)
Threaded Holes
(6XM5)
6

Install QR From Outside
Note: Using any QR must and can only be powered and signaled to the XF1 Pro via the USB-XS9 cable.
7

Interface
18 RGB LEDs compatible with Simhub
800x480 IPS LCD compatible with Simhub
16 Momentary button
2 Thumb rotary encoder
2 Front rotary encoder with push button
2 Multi-directional joystick with integrated encoder
2 Non-contact hall shifter paddle
2 Optional non-contact hall clutch paddle
2 Optional non-contact hall option paddle
9
Note: Keep in mind that on the page for the Windows USB Gaming device, some of the buttons will not show. This is
due to the Windows graphic interface's limitation in detecting more than 32 buttons.

Paddle Adjustment
All paddles can be adjusted to meet the size requirements of different people. By adjusting the
two screws of the paddles, move the paddles outward or inward, and then tightened securely
with the screws.
Note: The operating torque of the bolts should not exceed 3Nm.
10

SimBridge Plugin For Simhub
XF1 Pro will be compatible with simhub through simbridge, enabling dashboard and LEDs
customization. To use it, you need to place SimBridge in the Simhub installation directory and
restart Simhub for it to take effect.
Note: You can download the latest version on the website www.leoxz.com.
11

Simhub Compatibility
11
XF1 Pro is a plug-and-play device, so
you can connect it to SimHub without
having to complicatedly install any
drivers.
You can display various dashboards on
screen and change brightness through
SimHub, and you can also achieve
various lighting effects by creating
different profiles.
XF1 Pro uses a specially customized vocore
screen, which can achieve 16bit color and 60FPS
screen update rate through usb2.0.
When the dashboard has a complex or gradient
image, enable “Dithering” to get a better display
effect.
* Using 60FPS will have higher cpu usage than using
30FPS.

Paddles Functionality
11
The optional clutch paddles can be
configured for axis mode and bite
point mode.
The optional option paddles can be
configured for axis mode and
button mode.
All paddles have self-calibrate functionality to
ensure high accuracy. This function requires
that the paddles be pressed once (from
minimum position to maximum position) each
time the steering wheel is started.
Ensure the best encoder input by
setting Encoder pulse width, a
higher value will keep the pulse
input longer, and a shorter value
will ensure a faster response. 10 is
an optimal value for most games.
BP: Bite point value
LC: Left clutch paddle value
RC: Right clutch paddle value
LO: Left option paddle value
RO: Right option paddle value

Quick Controls
11
By binding any controller or keyboard input,
you can quickly control the XF1 Pro
dashboards switching, screen and LEDs
brightness, clutch paddles and option
paddles mode and bite point value.
When changing the paddles mode, setting
the bite point and LEDs brightness through
the quick control, there will be relevant
prompts on the screen to ensure that you
can get feedback at any time in the game.
Once a setup is done, parameter values are automatically
saved in XF1 Pro.

Firmware Update
Through the “Setting” menu of Simbridge, you can check the current firmware version of
XF1 Pro and update the latest firmware. Once the update is completed, XF1 Pro will
automatically restart.
Note: You can download the latest firmware on the website www.leoxz.com. Do not operate the steering wheel during
the update process, as it may cause unexpected errors.
12

Hardware Reset
If the firmware update fails and the steering wheel cannot start normally, please try hardware
reset to force the steering wheel to enter Bootload mode and update the firmware again.
12
1. Disconnect the power to the steering wheel
to keep the steering wheel in a power-off state.
2. Press the Reset button.
3. While holding down the Reset button, insert
the USB cable to start the steering wheel. If the
button is still pressed when starting, the
steering wheel will be forced into Bootload
mode.
4. Try updating the firmware again.
Reset button

www.leoxz.com
[email protected]
Copyright © 2023 Leoxz® All Rights Reserved