LEOXZ XF1 SPORT User manual

XF1 SPORT | MANUAL

CONTENTS
•Notes
•What's included
•Function
•Connection
•BLE Connection
•QR Installation
•Menu Setting
•Firmware Update
•SimBridge Plugin
•Paddle Adjustment

Notes
•Read user guide manual completely before installing or operating the device available at leoxz.com
website
•Mount device securely to a rigid platform before use. XF1-sport to a proper table mount or a racing rig
that is XF1-sport compatible with all four fixings screws that are included. Do not use other types of
fixings. For further help, refer to User Guide leoxz.com website. Never operate the product without fixing
it first as instructed.
•Test functioning of the Torque off button before each usage session
•Do not attempt to stop freely rotating parts by grabbing
•Always use the Torque off button or power off the device to stop and prevent motion
•Instruct other users of the device about the safe usage
•Keep hair, cables, clothing and other entangling items clear from the rotating parts
•By operating this product you agree to Granite Devices terms and conditions.
•All of the illustrations in this user guide are for reference only, please refer to the product pictures on the
http://www.leoxz.com website for details, and the actual product shall prevail.
Copyright © 2020 Leoxz® All Rights Reserved

What's included
•XF1 Sport Steering Wheel (Quick release optional)
•6x M5x10 Bolts
•USB Cable (Type-C to Type-A)
•Custom Stickers
•Quick Guide
LEOXZ

12
3
4
5
6
7
8
9
10
11
12
13
14 15
16-18
38 39
27 28
29-30
19-21 22-24
31-32
33-37
25/Axis 1 26/Axis 2
Status Led
Flag Led
Rpm Led
LEOXZ
Change Setting
Function
A 4.3-inch, 60fps ips screen, up to 39 button inputs, 2 input axis that can be set as clutch bits points, 3 led
bars for indicating vehicle status, flag and rpm.
The change button is used to quickly switch screens, and the setting is used to set the XF1.

Connection
FX1 supports pc connection via USB 2.0 and BLE 5.0. Either way you connect, you get very low latency.
We highly recommend you to use BLE connection, because most bases can power the steering wheel
through the quick release, wireless BLE connection can bring a very amazing experience. If you connect
via BLE, you need to ensure that the external antenna is installed firmly.
USB 2.0
Use the type-c cable for USB wired connection.
please use the attached spring cable for connection
and pay attention to the need to be careful with the
usb cable winding, excessive pulling may cause
permanent damage to the type-c interface.
BLE 5.0
The BLE 5.0 wireless connection needs to be
powered by quick release and the pc needs to
have a Bluetooth adapter. BLE 5.0 is backward
compatible with BLE 4.0 and 4.2.
2.4Ghz Antenna
Type-C USB

BLE Connection
A wireless connection is the recommended connection method for the XF1, as it can get rid of the
shackles of the usb cable and provide low latency and high reliability.
XF1 currently supports Bluetooth connection through BLE4.0, 4.2, 5.0. For the first Bluetooth connection,
you need to pair the steering wheel in the PC. Once the pairing is completed, subsequent connections will
be completed automatically. When BLE is disconnected, the first Flag Led will flash blue.
On your PC, select Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device
> Bluetooth. Choose Leoxz XF1 BLE, then select Done.

QR Installation
XF1 has 12 mounting holes with a diameter of 70mm for quick release installation, of which 6 are through
holes and 6 are threaded holes. The maximum diameter of the quick release is 88mm.
Through Holes
（ 6XΦ5)
Threaded Holes
(6XM5)

Menu Setting
As shown in the figure, XF1 can quickly switch
the screen meter through the <Change>
button. There are more than 10 different styles
of meters built-in, and the types will continue
to increase with the firmware update.
Through the <Setting> button, you can switch
between different setting menus, including
screen brightness, led bar brightness, dual -
clutch bite point, axis mode, and other menus.
Parameters can be increased or decreased
through the <Value> encoder.
Short press the <Setting> button to enter the
setting menu and switch between different
menus, and press the <Change> button to exit
the setting menu.
Change
Setting
Value +/-
LEOXZ

Firmware Update
XF1 has built-in two powerful chips, one is responsible for screen display, ensuring that the screen can
output full-color images at a high frame rate, and the other is responsible for button processing and
communication. Through firmware upgrade, the two chips can be kept in the best working condition, and
keep adding features.
The XF1 supports firmware updates via USB or BLE. Once the PC is connected to the device, update it
instantly by selecting the latest firmware in simbrige.
Thanks to the update error correction mechanism of XF1, if the update fails due to an accident, you can
reconnect and update again. After the update is interrupted and reconnected, the screen may not display
anything. Don't worry, it will return to normal after the re-update is completed.
Note: Updates can take 15 minutes or more due to complex validation mechanisms and large amounts of
data to transfer. If XF1 cannot connect to Bluetooth after the update, please try pairing again. For details,
please refer to the BLE connection chapter.