Sharper Image 204550 User manual

Virtual Reality Alien Attack Game
Item No. 204550

QUICK START GUIDE
Step 1
Load the Batteries
The Virtual Reality Alien Attack Game requires
2 AA batteries (not included).
1. Remove the small locking screw
from the battery compartment.
2. Open the battery compartment door.
3. Insert 2 new AA size alkaline batteries, making sure the polarity
(+ and -) follows the diagram shown.
4. Replace the battery cover and locking screw.
Note: We recommend using 2 new AA alkaline batteries. Do not
mix old and new batteries. To preserve battery power, this device
will turn o automatically if it is not used for 10 minutes.
SAFETY WARNING
• Be sure that your mobile device is held securely in the smart
device holder.
• Adjust the volume on your device to a safe, comfortable level.
• Hold the device tightly while playing.
• Be aware of your surroundings and other people around you
while playing.
• Adult assembly required.
• This device is not intended to provide protection for your
mobile device.
• Sharper Image is not responsible for any damage incurred
while playing this game.
Step 2
Press the button on the right side of the
smart device holder to extend the
spring-loaded smartphone mount.
It will extend fully to approximately
3.5 inches.
Step 3
Place your device in the center of the holder
and slowly close the upper mount.
Press down gently until your device is securely
in place. Make sure that the camera lens is
not blocked, and that the volume buttons are not
being pressed down.
Step 4
Download the free app from Google Play
or the iTunes App Store. Search for “ARliens,”
“AR Attack” or “AR Aliens.”
Turn ON Bluetooth on your device BEFORE
launching the app.
Launch the ARliens app
on your device.
Step 5
Select “Single Player” to begin. Then select your Weapon and Level.
Pull the trigger or touch the screen to start.
Step 6
Look for the red dots on your radar screen and fire at the aliens!

Downloading the App
This game requires the ARliens App. Search “ARliens,” “AR Attack”
or “AR Aliens” on Google Play or the iTunes App Store. You may also
visit www.arattack.com for the latest updates and more.
Age Requirement
The Virtual Reality Alien Attack Game is recommended for Ages 9+.
Compatibility
At the time of this printing, the AR-1 Gun supports the Android
and Apple iOS devices listed below. More devices will be supported
in the future. Please visit www.arattack.com for the latest news
and updates.
Android
Tested with:
• Samsung Galaxy S4, S5& Note 3 with OS 4.4.2
• Xiaomi 4 with OS 4.4.4
• Huawei Honor 6 with OS 4.4.2
• Google Nexus 4 & 5 with OS 4.3
• HTC One (M7) & Butterfly S with OS 4.3
• Sony Z & Z1 with OS 4.3
Apple iOS (recommended iOS 8.0 or higher)
Tested with:
• iPhone 4S, 5, 5C, 5S, 6 and 6 Plus
• iPod touch (5th gen)
Note: All devices must support Bluetooth v4.0
(a.k.a. Bluetooth LE, BTLE or BLE).
Smart Device Holder
Trigger
Battery Compartment
USER MANUAL
Introduction
Thank you for purchasing the Sharper Image Virtual Reality Alien
Attack Game. When paired with your smartphone, this device
transports you into a futuristic world of sci-fi action and excitement!
Please take a few minutes to read this manual, and store for
future reference.
Package Contents
1 x AR-1 Gun
1x Smart Device Holder
1x Virtual Reality Poster
1x User Manual (with Quick Start Guide)
Overview
AR-1 Gun

Virtual Reality Poster
You may also use your AR-1
Gun with the included Virtual
Reality Poster.
• Place the poster on a wall or
door with adequate lighting.
• Point the gun at the poster,
approximately 2 feet away.
• In a few seconds, the “worm
hole” appears and you’re ready
for action!
• If you lose your Virtual Reality Poster, you can download a
new one at www.arattack.com. It can be printed out and used
in either color or black-and-white.
Troubleshooting
Q: What if I started the app accidentally before turning on Bluetooth?
A: Manually exit the app. Turn Bluetooth ON in the device Settings
menu. Then start the app again.
Q: The Bluetooth is not connecting with the AR-1 Gun, even after
I switched Bluetooth ON before launching the app.
A: Bluetooth may take up to 30 seconds to pair with the AR-1 Gun.
Q: It’s just not working!
A: Check that your batteries are inserted correctly. It may be
necessary to replace the batteries with a fresh set.
Q: I paired by AR-1 Gun earlier, but now I can’t get to work.
A: Make sure there is only one Bluetooth device set to “ON” with
the AR-1 Gun. Turn o other Bluetooth devices and start again.
CUSTOMER SERVICE
If you require any assistance with your Sharper Image Virtual
Reality Alien Attack Game, please call 1 [phone] and
select Option 3.
Game Set-Up
1. Attach the Smart Device Holder to the AR-1 Gun
Align the bottom of the holder with the top of the gun and gently
push into place. Make sure the holder is securely attached.
2. Place your Smart Device in the Holder
A. Press the button on the right side of the smart device holder
to extend the spring-loaded smartphone mount. It will extend
fully to approximately 3.5 inches.
B. Place your device in the center of the holders and slowly
close the upper mount.
C. Press down gently until your device is securely in place.
Make sure that the camera lens is not blocked, and that the volume
buttons are not being pressed down.
3. Pairing the AR-1 Gun with your Smart Device
A. IMPORTANT: On your device, switch Bluetooth to “ON” before
launching the app.
B. The AR-1 Gun will pair automatically with your device when
you set the Bluetooth function to “ON” on your device.
C. Launch the app and select Single Player.
Note: The Bluetooth connection may take up to 30 seconds to pair
with the AR-1 Gun. Once it is paired, the AR-1 Gun will be activated
automatically.
4. Beginning Game Play
Select Single Player from the menu
on your screen. Then, select your
weapon. After selecting a weapon,
pull the trigger or touch the screen
to begin.
Note: Two blasters may be used together
for Multiplayer gaming. Consult the In Game Instructions
from your main menu screen or visit www.arattack.com
for helpful tips and videos.
Main Menu

SAFETY INFORMATION
Important Battery Cautions:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Dierent types of batteries or new and used batteries are not to be mixed.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. This device and its antenna(s) must
not be co-located or operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. --
Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction. This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter.
Disclaimer:
iPhone and iPod Touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service
mark of Apple Inc. Android is a trademark of Google Inc., registered in the U.S. and other countries. Google Play is a
service mark of Google Inc.
Video Game Updates:
Please visit www.arattack.com for news, tips, videos and other helpful information about the AR-1 Gun and the
ARliens App.
Product and colors may vary from actual model. This product is made in China and this manual is printed in China.
Product names, designations and logo are trademarks or registered trademarks of Maksco Toy Ltd. AR Attack is a
registered trademark of Maksco Toy Ltd. All Rights Reserved. Patent Pending 201330039682.3. MAKSCO TOY LTD.,
6 HUNG TO ROAD, HONG KONG
Manufactured and distributed by @ 2013-15 Maksco Toy Ltd. 012015/ENG
The equipment that you have purchased has required the extraction and use of natural
resources for its manufacturing. It may contain substances that are hazardous to health
and the environment. In order to prevent release of these substances into the environment
and to reduce the pressure on natural resources, we encourage you to use appropriate
return systems. These systems will ensure that most of the materials in your equipment are
properly reused or recycled at the end of its operational life. The crossed-bin symbol invites
to use these systems. For further information on collection, reuse and recycling systems,
please contact your regional waste management administration.
This symbol is only valid in the European Union. If you wish to discard this product, please contact your local
authorities or dealer and ask for the correct method of disposal.