LevelOne PIS-3100 User manual

PIS-3100 High Power PoE Adapter Combo Kit
User’s Manual
Check your package contents
The carton should contain the following items:
PSE Device
PD Device
Power Cords
If any item is found missing or damaged, please contact your local reseller for replacement.
General Feature
PSE
Power Sourcing Equipment (PSE) transforms AC to DC. It has a maximum output power of 30W,
fluctuation of 30mV with a tolerance of ±3%. When it overflows, overloads, short-circuits, or overheats,
the PSE automatically turns off the power, and restarts after these problems are removed.
When PSE detects that it connects to a device which uses no electricity, the power supply will be turned
off automatically.
PSE monitors circuit status at all times. Once it detects that it connects to an electronic device that has a
range between 1-30W, it automatically provides electricity to it. When it is lower than 1W electricity will
not be supplied.
PSE protects circuits from problems such as short-circuit, overload, and electricity receiving device
damage by turning off the power once a problem occurs. Normal power supply will be resumed once
these problems are eliminated
Connector
Data and power out: 1 x RJ-45.
- Data pin 1,2,3,6
- Power pin: 4,5(V+), 7,8(V-)
PD
Turns any device into a PoE-capable device
Compatible with Access Points, Network Cameras, or other DC 12V devices(up to 24W)
Connector
Data and power in: 1 x RJ-45
- Data pin 1,2,3,6
- Power in: 4,5(V+), 7,8(V-)
Data out: 1 x RJ-45
- Data pin 1,2,3,6
Power out: 12V/2A
All manuals and user guides at all-guides.com
all-guides.com

Dimension and Weight
PSE Device
133×80×36mm
384g
PD Device
98×94×34mm
292g
Installation
Data (Cat.5)
Power(Powerline)
Data+Power(Cat.5)
All manuals and user guides at all-guides.com