LevelOne CamCon FCS-1060 User manual

IP CamSecure
User’s Manual
Copyright (c) 2008 Digital Data Communications Co., Ltd. All Rights Reserved.
All features and functions are subject to change without notice. Please visit www.level1.com for the
latest ones.
Ver. 1.8-0810

INSTALLATION.................................................................................................................................................................................3
MINIMUM SYSTEM REQUIREMENT.................................................................................................................................................3
INSTALL IPCAMERA(S)....................................................................................................................................................................4
INSTALL CAPTURE CARD(S).............................................................................................................................................................4
IPCAMSECURE INSTALLATION.......................................................................................................................................................5
MAIN CONSOLE.............................................................................................................................................................................11
PLAYBACK.......................................................................................................................................................................................17
TOWITHDRAW THE RECORD .........................................................................................................................................................20
SEARCH MODE...............................................................................................................................................................................22
ENHANCEMENT..............................................................................................................................................................................28
SAVE VIDEO /SAVE IMAGE ............................................................................................................................................................29
PRINT /BACKUP.............................................................................................................................................................................30
LOGVIEWER..................................................................................................................................................................................31
SCHEDULE.......................................................................................................................................................................................35
ENCODING OPTIONS PANEL ..........................................................................................................................................................38
GUARD..............................................................................................................................................................................................41
EVENT ............................................................................................................................................................................................42
ACTION ..........................................................................................................................................................................................58
CONFIGURATION..........................................................................................................................................................................60
MONITOR DISPLAY ........................................................................................................................................................................74
SAVE/LOAD CONFIGURATION........................................................................................................................................................75
COUNTINGAPPLICATION...............................................................................................................................................................76
LOGVIEWER..................................................................................................................................................................................77
NETWORK SERVICE.....................................................................................................................................................................86
LIVE STREAMING SERVER.............................................................................................................................................................86
REMOTE PLAYBACK SERVER ........................................................................................................................................................90
3GPPSERVICE...............................................................................................................................................................................93
REMOTE DESKTOP.........................................................................................................................................................................96
CENTRAL MANAGEMENT SERVICE ...............................................................................................................................................97
REMOTE LIVE VIEWER...............................................................................................................................................................98
DBTOOLS .......................................................................................................................................................................................103
BACKUP..........................................................................................................................................................................................107
HOW TO USE IP CAMSECURE IN VISTA................................................................................................................................ 111

IP CamSecure
Installation
3
Installation
Minimum System Requirement
Parameter definition:
For IP network camera
M: parameter of resolution of camera. 1 Mega-pixel : M=10VGA or D1 resolution : M=5CIF
resolution : M=1
N: FPS of Camera
For analog camera (FCS-8004 capture card) P = 60
S=M*N+P For example: 16 channel system a) 1 camera at 1 Mega-pixel resolution with 10FPS b)
2 cameras at D1 resolution with 15FPS c) 5 cameras at CIF resolution with 30FPS d) 8 cameras
with 2pcs FCS-8004
a) M=10; N=10, S=10*10=100 b) M=5; N=15, S=5*15=75 c) M=1; N=30, S=1*30=30 d) P=60 S of
All Cam.=1*100+2*75+5*30+2*60=520 Therefore, the Minimum Hardware Requirement is D level.

IP CamSecure
Installation
4
Install IP camera(s)
Step 1: Set up the IP camera referring to the quick installation guide provided.
Step 2: Check the network between the IP camera and the system.
Step 3: Add the IP camera to the system. See details on later pages.
Install capture card(s)
Step1: Insert the card onto an empty PCI slot. Connect the Audio/Video Cable to the connector in
the same color.
Step 2: Turn on your PC and start Windows.
Step 3: Insert the included Software CD into CD-ROM.
Step 4: Run SetupDrv.exe from the CD-ROM driver/ directory to install the Capture Card driver.
Step 5: Run dxdiag.exe from start menu ‘Start-> Run’ to check your DirectX version. If the installed
version is less than 9.0, install DirectX 9.0 from the CD-ROM directx9/ directory.
Step 6: After driver being installed, restart your PC.

IP CamSecure
Installation
5
IP CamSecure Installation
Step 1: Insert the Installation CD.
Step 2: The setup page should be loaded automatically. If it does not, please select your CD-ROM
drive manually to open the setup page. Click “IP CamSecure” to initiate the installation.
Step 3: Select the language for installation from the choices below.
Note: if you want to install Farsi or Hebrew, please select English for language. After installation is
finished, run LangPackFAR.exe for Farsi or LangPackHEB.exe for Hebrew from the language pack
folder in CD-ROM directory to install.

IP CamSecure
Installation
6
Step 4: Click “Next”
Step 5: Check the option “I accept the terms of the license agreement”.

IP CamSecure
Installation
7
Step 6: Please enter your name and the company name for which you work.
Step 7:
C
CO OM MP PL LE ET TE E S SE ET TU UP P T TY YP PE E: :[Require the most disk space.]
Install all program features into the default directory.
Check the option “Complete”.
C
CU US ST TO OM M S SE ET TU UP P T TY YP PE E: :[This is recommended for advanced users.]
Install the system to a preferred directory. Or select whichever feature(s) you wish to install.
Check the option “Custom”.

IP CamSecure
Installation
8
Select folder where setup will install files.
Select the features setup will install.
Hint: For example, select only Playback and LiveView for installation. Install and use only these
features on multiple remote sites at home or anywhere with a PC.

IP CamSecure
Installation
9
Step 8: Press the “install” to start the installation.

IP CamSecure
Installation
10
Step 9: Press “Finish” to finish the installation.
Step 10: Execute the Main Console
**IP CamSecure Lite32 is free bundled with LevelOne IP camera and Capture Card.
** IP CamSecure professional version is available upon purchase. While using IP
CamSecure Pro/Pro Plus/Pro Mega ,please plug the included USB dongle into USB port as a
license key.

IP CamSecure
Playback
11
Main Console
The main operation system. To activate schedule recording, setup smart guard and configure
system setting.

IP CamSecure
Playback
12
Exit: Shut down the main console or log out current user.
Minimize:Minimize the Main Console.
Screen Division: Allocate the sub-screen displays of cameras by clicking on the icon of desired
layout. Quick switch to single camera display by double click the particular sub-screen. Double click
the single camera display again to regain previous screen division layout.
Exit
Minimize
Screen Division
Divide into
1 screen(s) Divide into 4 screen(s) Divide into
6 screen(s) Divide into 9 screen(s)
Divide into
10 screen(s) Divide into 13 screen(s) Divide into
16 screen(s)
Divide into
N screen(s)
Divide into
13 screen(s) Divide into 17 screen(s) Switch to Full screen Rotate all screens

IP CamSecure
Playback
13
S
ST TA AR RT T: : Click on the Start icon and select from the drop down menu to activate/ deactivate: (a)
Recording Schedule System, (b) Smart Guard System, or (c) Counting Application. Select
Start/Stop Monitor All to activate/ deactivate all the functions at once.
You may also enable secondary display, open event report, and lock the system here. See later
pages for more details about secondary display.
Note: When activating any of the monitor functions, system considers the current screen status as
normal. Therefore, if you want to, for example, detect Missing Object, be sure the object needed to
be protected is in its position at the moment you click Start button.
Start

IP CamSecure
Playback
14
Playback: Click the icon to get Playback Console. You can watch recorded video, search, adjust
image from records data, save video pictures and print images, check log in information, event
records and setup recording function configuration. See Playback in detail on later pages.
Schedule:Schedule recording time table and setup recorder configuration. See Schedule in detail
on later pages.
Guard: Add/edit type(s) of events which you want to detect; setup reaction(s) responding to events.
See Guard in detail on later pages.
Config: Setting, Save/Load Configuration, Counting Application, Log Viewer and Backup.
Crystal Ball: Indicates the working status of the system. In blue color rolling when system is
recording; in red when event detected. When the Crystal Ball is red, click it can you can cancel
event(s).
Information Window:Shows the system information including date, time, free HD space and
customized text. You can customize the setting of Information Window in Config > Setting >
General.
PTZ Camera Control:: Control the movement of PTZ cameras. With cameras that support PTZ
control, you can zoom, adjust the focus, and set preset points of the cameras.
Preset/ Go: Adjust the camera view until you are satisfied. Click on the Set icon and set up the
view as the preset point 01. Adjust the camera view again and set up the preset point 02. Repeat
the process until finish setting up all preset points.
Click on the Go icon and view the result of your setting.
Zoom: Click on the + and – signs to zoom in and out the view.
Focus: You can select to have the camera focused near or far. To focus near means objects that
are closer will be clearer than the objects that are further away. On contrast, to focus far means
objects that are further will be clearer than the objects that are close.
Playback Schedule Guard Config
PTZ Camera
Control
Information
Window
Crystal Ball

IP CamSecure
Playback
15
Click on the Focus icon and select auto focus if you want the system to decide the focus point for
you.
Patrol: Go to Patrol > Set Patrol to obtain the Patrol Setup dialog. From the left window, select the
cameras that you would like to have in the patrol group. Align the cameras in order in the right
window and adjust the time. Rename the group name if you want. After completing the setup,
check the Active box, and then click OK.
You can setup up to four groups of auto patrol. To start or stop, click on the Patrol icon in the Main
Console, and select Start Patrol or Stop Patrol.

IP CamSecure
Playback
16
On Screen Menu:
Right click on the camera screen and get the On Screen Menu, from
which you can enable move, enable digital PTZ, and connect/ disconnect
the camera.
Enable Move: With cameras that support PT function, by selecting the
enable move function, you may adjust the camera’s view by clicking on
the display screen. To cancel this function, right click on the screen and
select Disable Move.
Note: You can only work on current camera after clicking Enable Move.
Enable Talk: With cameras that support two-way audio, you may select
enable talk to utilize the function.
Connect/ Disconnect: Right click on the display screen and select
Connect/ Disconnect to modify the connecting status of the camera.
Show Camera: Select the camera to be displayed from the Show Camera Menu.
Delete Camera: Click on Delete Camera to remove a camera from the display screen. This does
not delete the camera from the setting list.
Enable Digital PTZ: To enable the PTZ functions of the camera, select the Enable digital PTZ
option. When enable digital PTZ, we can use mouse wheel to zoom in and zoom out on the
camera.
Note: Enable Digital PTZ is the option function in IP+ software not in IP software
Fix Aspect Ratio: For some special camera resolution, user can enable Fix Aspect Ratio to view
original ratio video, or disable this option to stretch 3:4 to fit window.
Snapshot: Select the snapshot function to capture a specific video image immediately. You have
the options to copy the image to the clipboard or to save it.
Manual Record: Start recording video by selecting manual record.
Toggle Full Screen: To view a specific channel with full screen.

IP CamSecure
Playback
17
Playback
Watch the recorded video, view and/or search for unusual events and recorded system information.
*There is only 1 channel displayed in Playback in IP CamSecure Lite32 while there are up to
16 channels displayed in IP CamSecure Pro/Pro Plus/Pro Mega simultaneously.

IP CamSecure
Playback
18
Minimize: Minimizes the playback Console window.
Exit: Turn off the Playback Console.
Scroll Bar: Indicate the status of the playing video; drag it to where you want to review.
Control: Play, pause and stop the video.
Cue: When playing video, click on the Cue In/ Cue Out icon at where you want to set as the
starting/ ending point of a saved video clip or a backup file. The Cue In and Cue Out time will show
on the Playback Information Window once they are set.
Speed: Control the speed of the playing video. Click + to speed up and – to speed down the video.
Zoom:Zoom in and zoom out. You can get a close up view of the recorded video and move to the
spot you want to view by dragging the screen.
Scroll Bar
Exit
Minimize
Control Cue SpeedZoom

IP CamSecure
Playback
19
Browse Mode:Play the recorded video.
Search Mode:Click on the Search Mode icon and get the Intelligent Search Tool panel. You can
setup unusual events here to detect abnormality that occurred during the video was recorded. To
setup unusual events, see this in detail on later pages.
S
SC CR RE EE EN N D DI IV VI IS SI IO ON N: : Allocate the sub-screen display by clicking on the desired layout icon. To
switch to single camera display, double click on a particular sub-screen. Double click on the screen
again to regain previous screen division layout.
I
IN NF FO OR RM MA AT TI IO ON N D DI IS SP PL LA AY Y W WI IN ND DO
OW W: : Display video date and time, current video status, cue in/ out
points’ time, and speed.
Date Time: By clicking on Date Time bottom, you can withdraw the video record that you want to
review. As you click on the Date Time bottom, a control panel will show up. Follow the instruction on
the next page to withdraw the record.
Audio Volume Control: Adjust the sound level.
Browse Mode
Search Mode
Date Time
Audio Volume
Control
FWD/REV:
You can customize the
speeds on Setting panel.
Step FWD/REV:
Forward/reverse frame by
f
r
ame.