Lex CI270CW User manual

CI270CW
533MHz FSB / VGA / DVI / Multi-COMs / LAN /
Mini PCI / PCIe mini card
NO. CI270CW
Release date: OCT . 01 . 2009
Intel Atom N270 . 533MHz FSB . All-In-One .
Audio . LAN . Mini PCI . PCIe mini card
SATA . 8 USB . CF . Wide range DC-input
Multi-COM Board

i
CI270CW
Warning!...........................................................................................................................
Hardware Notice Guide .............................................................................................
CHAPTER 1 GENERAL INFORMATION ........................................................................
1-1 MAJOR FEATURE........................................................................................................
1-2 SPECIFICATION ..........................................................................................................
1-3 VERTICAL SODIMM ASSEMBLY GUIDE.....................................................................
1-4 DIRECTIONS FOR INSTALLING THE MINI CARD .....................................................
1-5 INSTALLING THE MINI PCI CARD .............................................................................
1-6 PACKING LIST..............................................................................................................
CHAPTER 2 HARDWARE INSTALLATION ...................................................................
2-1 UNPACKING PRECAUTION .......................................................................................
2-2 UNPACKING CHECKUP .............................................................................................
2-3 DIMENSION-CI270CW (200 x 150m) .........................................................................
2-4 LAYOUT-CI270CW ......................................................................................................
2-5 DIAGRAM-CI270CW ...................................................................................................
2-5-1 BOTTOM SIDE DIAGRAM-CI270CW ......................................................................
2-6 INSTALL MEMORY .....................................................................................................
2-7 LIST OF JUMPERS ....................................................................................................
2-8 JUMPER SETTING DESCRIPTION ..........................................................................
2-9 JSB1: CMOS DATA SET .............................................................................................
2-10 JVF1: CF CARD POWER VOLTAGE SELECT .......................................................
2-11 JSF1 CF CARD MASTER AND SLAVE SELEC .......................................................
2-12 JSP1: AT /ATX POWER SELECT ............................................................................
2-13 COM PORT PIN9 SELECT RI SIGNAL OR VOLTAGE SOURCE ...........................
2-14 JSC3,JSC31/32/33/34: COM3 RS232/422/RS485 SELECT ...................................
2-15 JVL1: LVD PANEL POWER SELECT ........................................................................
2-16 JVP1: LVDS PANEL INVERTER POWER SELECT ................................................
2-17 JVU8: USB PORT 8 VOLTAGE SELECT .................................................................
2-18 JSD1: DPC DUTY SET .............................................................................................
CHAPTER 3 CONNECTION ........................................................................................
3-1 LIST OF CONNECTORS ...........................................................................................
3-2 FAN CONNECTOR ....................................................................................................
3-3 SATA INTERFACE ......................................................................................................
3-4 IDE CONNECTORS ...................................................................................................
3-5 COMPACT - FLASH MEMORY SOCKET ...............................................................
3-6 VGA CONNECTOR ....................................................................................................
3-7 DVI-D CONNECTOR ................................................................................................
3-8 KEYBOARD AND MOUSE CINNECTOR ...................................................................
Contents
7
8
9
10
11
1
2
4
5
6
11
14
15
13
21
21
18
22
19
23
23
19
16
17
12
24
26
25
26
28
31
28
29
24
30
20
31
32

ii
3-9 USB PORT ..................................................................................................................
3-10 LAN CONNECTOR ...................................................................................................
3-11 COM PORT CONNECTOR .......................................................................................
3-12 AUDIO PORT CONNECTOR ....................................................................................
3-13 AUDIO AMPLIFIER CLASS D TWO CHANNEL 6W/CH ..........................................
3-14 LPT PORT .................................................................................................................
3-15 WDT/DIO FUNCTION PORT ....................................................................................
3-15-1 FOR F75111N I2C WATCH DOG TIMER DEVICE: ..............................................
3-16 I2C WDT/DIO W75IO.H REFERENCE SAMPLE CODE: ........................................
3-16-1 I2C WDT/DIO F75111N REFERENCE SAMPLE CODE: .....................................
3-17 LVDS INTERFACE CONNECTOR ...........................................................................
3-18 PANEL POWER CONNECTOR ................................................................................
3-19 TOUCH SCREEN DEVICE .......................................................................................
3-20 DC 12V IN .................................................................................................................
3-21 DC +5/+12V OUTPUT CONNECTOR ......................................................................
3-22 I2C BUS INTERFACE ...............................................................................................
3-23 MINI CARD ................................................................................................................
3-24 FRONT-PANEL ..........................................................................................................
CHAPTER 4 INTRODUCTION OF BIOS.......................................................................
4-1 ENTER SETUP ...........................................................................................................
4-2 GETTING HELP ..........................................................................................................
4-3 THE MAIN MENU .......................................................................................................
4-4 STANDARD CMOS FEATURES ................................................................................
4-5 ADVANCED BIOS FEATURES ...................................................................................
4-5-1 HARD DISK BOOT PRIORITY ................................................................................
4-5-2 USB BOOT PRIORITY ............................................................................................
4-6 ADVANCED CHIPSET FEATURES ............................................................................
4-6-1 PCI EXPRESS ROOT PORT FUNC ........................................................................
4-7 INTEGRATED PERIPHERALS ...................................................................................
4-7-1 ONCHIP IDE DEVICE FUNCTION .........................................................................
4-7-2 SUPER IO FUNCTION ............................................................................................
4-7-3 USB DEVICE FUNCTION .......................................................................................
4-8 POWER MANAGEMENT SETUP ..............................................................................
4-8-1 PCI EXPRESS PM FUNCTION ..............................................................................
4-9 PNP/ PCI CONFIGURATION SETUP ........................................................................
4-9-1 IRQ RESOURCES ..................................................................................................
4-10 PC HEALTH STATUS ...............................................................................................
4-11 FREQUENCY / VOLTAGE CONTROL .....................................................................
4-12 LOAD FAIL-SAFE DEFAULTS .................................................................................
4-13 SET SUPERVISOR / USER PASSWORD ...............................................................
35
45
34
33
38
39
39
40
55
41
57
40
57
56
55
66
61
63
66
67
69
58
59
58
70
71
73
74
61
64
75
60
60
76
77
78
78
79
79
80

iii
CHAPTER 5 DRIVER INSTALLATION........................................................................
5-1 INF INSTALL INTEL 945GSE CHIPSET SYSTEM DRIVER ..................................
5-2 VGA INSTALL INTEL 945GSE VGADRIVER ...........................................................
5-3 SOUND INSTALL VIA HID AUDIO CODEC DRIVER ...............................................
5-4 HOW TO UPDATE BIOS ............................................................................................
APPENDIX A: POWER CONSUMPTION TEST ..............................................................
APPENDIX B: RESOLUTION LIST ..................................................................................
81
83
85
87
89
90
91

OCT . 01. 2009
2009

1
1. Battery
Battery on board is consumables. We doesn’t guarantee the life time of it.
2. Fanless solution with HDD
Please be aware of specification & limitation for HDD when fanless solution
is implemented.
3. We will not give further notification if there is any change about the product
information and the manual.
4. SATA does not support Hot SWAP
5. There would be 20% difference of WDT at room temperature.
6. Please make sure the voltage specification meet the requirement
of the equipment before plugging into the power.
7. SSD has 2 types, commercial grade and industrial grade, which provide
different read/write speed, operation temperature and life cycle.
Please contact sales for further information before ordering.
8. Caution ! Please notice that the heat dissipation problem could cause the
MB system unstable. Please handle the heat dissipation properly when
buying single MB.
9. Please avoid to approach the heat sink area and prevent being scalded when
using the Fanless products.
10. If the users repair, modify or destroy any component of product
unauthorized, We would not take responsibility or provide warranty.
Warning !
+
-

2
Hardware Notice Guide
1. Before installing the power supply with this motherboard, please attach the 12V/DC
( 4 pin connector )of the adapter to motherboard first.
After that, plug the adapter power toAC outlet.
Always normally shut down the computer before you move the system unit or remove
the power supply from the motherboard.
Please unplug the 12V/DC ( 4 pin connector ) of the adapter from motherboard first.
Then unplug the adapter from the AC outlet.
Please refer to procedure from the photo 1
2. There will be high possibility to burn out the CPU if you change/ modify any parts of the
CPU cooler.
3. Please wear wrist strap and attach it to a metal part of the system unit before handling a
component.
You can also touch an object that is of ground connection or with metal surface if you don't
have wrist strap.
4. Please be careful when you handle this product. Pay attention to & don't touch the
sharp-pointed components at the bottom PCB .
5. Please pay attention to this: Remove or change any components form the motherboard
will VOID the warranty of the motherboard you purchased .
6. Before you install/remove any components or make any jumper setting on the motherboard,
please make sure to disconnect the power first.
( Please follow the instructions as of this guide )
7. Please follow this instruction carefully when using the "POWERON after PWR-Fair" function.
When the DC power adaptor runs out of power, unplug it from the DC current;
when power returns plug it back in only after 5 seconds. If there is a power outage,
unplug it from the AC current, when power returns plug it back in only after 30 seconds.
Otherwise it will cause system locking or serious damage.
Remark 1:
Always insert/unplug the 12V/DC ( 4 pin connector ) horizontally & directly from the
motherboard.
DO NOT twist the 12V/DC ( 4 pin connector ) gently, it is designed to fit snugly .
Moreover, erratic pull / push testing with the DC Jack might cause the unpredictable
damage to the component & system unit.
*

3
Photo 1
2
1
3
1
2
3
Insert
Unplug

4
The CI270CW is an All-In-One POS / Automation control Board. The board's design combines
all necessary input and output effects interfaces, which makes itself an ideal all-in-one
control board for demanding POS or automation control applications. CI270CW is the perfect
platform for a whole range of mobile and low-power devices.
A high-performance and power-efficient communication platform, the embedded motherboard
CI270CW is especially designed for advanced embedded car PC or POS system applications
where the economical use of power is in high demand.
With the sizable memory bandwidth of on board 1GB DDR2 module and the flexibility of
expanding the memory to 2GB with DDR2 SODIMM, CI270CW ensures the high performance
levels required of today's most popular POS/Automation control applications including
Embedded Car PC, POS, ATM, Kiosk and Panel PC.
CI270CW is supported with two 10/100/1G Ethernet for seamless broadband connectivity.
With Wake On LAN function and the PXE function in BIOS for Realtek LAN chipset only,
this is also ideal for networking applications. The built-in LAN options are two Intel 82574L with
RJ45 for 10/100M/1Gbps Ethernet or two Realtek RLT8111C 10/100/1Gbps Ethernet.
CI270CW also supports as many as five RS232 and one RS422/485 to meet the needs of
multi-COM connectivity.
Except Compact Flash and 40 pin IDE socket, CI270CW can be integrated with PCIe mini card
and Mini PCI Card. In addition, with the eight hi-speed USB version 2.0 enhanced host
controller interface, it ensures the high performance level and also the powerful and
flexible expansion.
The Compact Flash reader supports IDE/ATA interface. A single Flash chip holds the
system BIOS, and you can change the Flash BIOS by the Utility Update.
The CI270C All-In-One motherboard is fully compatible with industry standards,
plus technical enhancements, and thousands of software applications developed for
IBM PC/AT compatible computers. The control logic provides high-speed performance for the
most advanced multi user and multitasking applications available today.
Chapter-1
General lnformation

5
1. Intel Atom N270 CPU ( FSB 533 Mhz )
2. Intel 945GSE Chipset on board, Graphic Chip Integrated
3. On board DDR2 module 1GB and support DDR2 SODIMM up to 2GB (option)
4. On board SSD 1/2/4/8 Gbytes (option)
5. Support 2 x 10 / 100 / 1000 Mbps LAN on Board ( Realtek or Intel LAN Chip )
6. Support CRT resolutions up to SXGA+
7. 18 bits/ 36 bits LVDS Interface on Board. (option)
8. Support DVI.
9. Support 1 x Compact Flash Card Socket and 40 pin IDE socket on Board
10. Support 2 x SATA ports.
11. Support Mini PCI Socket on board and 1 x PCIe mini card for USB and PCIe interface
Support one PCIe x 1 interface.
12. Optional Wide range power supply
13. PCB Dimensions: 200 x 150 mm
14. Support dimming control function
1-1 Major Feature

6
1. CPU: Intel Atom N270 CPU ( FSB 533 Mhz )
2. ChipSet: Intel 945GSE and Intel ICH7M (82801GBM)
3. Memory: On board DDR2 module 1 GB or support DDR2 SODIMM up to 2GB
4. VGA: Internal Graphics Memory with dynamic video memory technology (DVMT3.0)
5. I/O Chip: ITE IT8712F and F81216AD IO chipset
6. SATA: Two SATA ports with independent DMA operation supported
7. NAND flash memory (option): Support Compact Flash card type II for ATA interface
On board SSD 1/2/4/8 GBytes
8. LAN: 2 x Reltek RLT8111C 10/100/1000 Mbps or Intel 82574L LAN chip for PCIe x 1 interface
9. Storage Device: 1 x 50 pins Compact Flash Socket
Ultra ATA 100/66/33, 1 x 40 pin 2.54 mm
10. Serial Port: 5 x RS232 + 1 x RS422/485 or 5 x RS485 + 1 x RS232 (optional)
11. USB: 8 x USB 2.0 (4 external+4 internal ports)
12. DVI: Chrontel DVI transmitter up to 165M pixels/second
13. Audio: Intel HD audio specification Rev. 1.0 Compliant
14. LVDS (option): support 18bits/ 36 bits LVDS interface resolution up to SXGA+
15. WDT/DIO: Hardware watch dog timer support, 0~255 sec programmable
Hardware digital Input & Output, 8xDI / 8xDO
16. Touch screen (option): C8051F321 USB/COM interface touch screen controller,
support 4-, 5-, 8- wire Analog resistive touch screen
17. Audio Amplifier (option): 6-W/CH into an 8-ΩLoad from a 12-V Supply.
Up to 92% Efficient, Class-D operation (optional)
18. Expand interface: 1 x Mini PCI socket for PCI Rev. 2.2 interface &
1 x PCIe mini card support USB and PCIe interface
1x PCIe x 1 interface
19. BIOS: Award BIOS version V6.1
20. Dimensions: 200 x 150 mm
21. Power (option): Wide range DC-IN from +9V to +32V or fix to +12V DC input convert
into power +12VAD to +5V/±5% and +3.3V/±5%, and +12V/±5%
22. Power Consumption: Please refer to page 90
1-2 Specification

7
1-3 Vertical SODIMM assembly guide
1.
Install the memory into SODIMM. 2. Press down firmly to ensure the memory
is locked.
1. Pull open both sides of the memory slot. 2. Take out the memory.
Uninstall

8
1-4 Directions for installing the Mini Card
1. Unscrew the screw on the board
3. Gently push down the Mini Card and screw the screw back.
2. Plug in the Mini Card in a 45 angle

9
1-5 Installing the Mini PCI card
1.Align the Mini PCI card with the connector at
a 45 degree angle. 2. Press the Mini PCI into the connector until you hear
a click.
Notices:
1.The connectors are designed to ensure the
correct insertion. If you feel resistance, check the
connectors & golden finger direction, and realign the card.
2. Make sure the retaining clips (on two sides of the slot)
lock onto the notches of the card firmly
1-5-1.1 Removing the Mini PCI card
1. Release the Mini PCI card by pulling outward
the two retaining clips and the card pops up slightly. 2. Lift the mini PCI card out of its connector carefully.

10
1-6 Packing List
Please contact with your dealer if any of these items is missing or damaged
on delivery. And please keep all parts of the delivery package with packing
materials in case if you need to deliver or store the product in the future.
*The packing list above is for the users who purchase single motherboard. The users
who purchase the board with chassis may refer to the packing list in the Assembly Guide.
1 MotherBoard
2 DC 12V Power Adapter(4P)
3 ATA 66 HDD Cable(40P)
1234
567
4 SATA HDD Cable(7P)
5 Power Cable
6 Utility CD Disk
7 User’s Manual

11
Hardware Installation
This chapter provides the information how to install the hardware of CI270CW.
Please follow section 1-6, 2-1 and 2-2 to check the delivery package and unpack
carefully. Please follow the jumper setting procedure.
Chapter-2
2-1 Unpacking Precaution
The CI270CW board has been well packed with an anti-static bag to protect its
sensitive components and circuitry from damage due to static electric discharge.
You should follow these
steps to protect the board from the static electric
discharge whenever you handle the board:
1. Ground yourself by a grounded wrist strap at all times when you
handle the CI270CW.
Well secure theALLIGATOR clip of the strap to the end of the shielded wire lead from
a grounded object. Please put on and connect the strap before handling the
CI270CW for harmlessly discharge any static electricity through the strap.
2. Please use anti-static pad to put any components, parts, or tools on the pad whenever
you work on them outside the computer. You may also use the anti-static bag instead of
the pad. Please ask your local supplier for necessary parts on anti-static requirement.
3. Do not plug any connector or set any jumper when the power is on.
1. Do not touch the board or any other sensitive components without all necessary
anti-static protection.
2. Please pay attention to the voltage limitation of DC-IN12 V 5 %.
Overuse of DC-IN voltage limitation or change to another power adapter
( not provided with this system ) will VOID warranty.
NOTE!
+
-

12
2-2 Unpacking checkup
First of all, please follow all necessary steps of section 2-1 to protect CI270CW
from electricity discharge. With reference to section 1-6, please check the delivery package
again with following steps:
1. Unpack the CI270CW board and keep all packing material, manual
and driver disc etc, do not dispose !
2. Is there any components lose or drops from the board? DO NOT CONTINUE
TO INSTALL THIS BOARD! CONTACT THE DEALER YOU PURCHASED THIS
BOARD FROM, IMMEDIATELY.
3. Is there any visible damage on the board? DO NOT CONTINUE TO INSTALL
THIS BOARD!CONTACT THE DEALER YOU PURCHASED THIS
BOARD FROM, IMMEDIATELY.
4. Check your optional parts (i.e. DDR, CF etc.), all necessary jumpers
setting to jumper pin-set, and CMOS setup correctly.
Please also refer to all information of jumper settings in this manual.
5. Check your external devices (i.e. Add-On-Card, Driver Type etc.)
for complete add-in or connection and CMOS setup correctly.
Please also refer to all information of connector connection in this manual.
6. Please keep all necessary manual and driver disc in a good condition for future
re-installation if you change your Operating System.

13
2-3 Dimension 200 x 150 mm
rj45
CI270C-M0.1
2009,02,25
rj45
9.5
25.48 53.44 84.68
105.56 132.65
200
16.600
19.100
130.900
135.000
7.100
19.100
93.000
116.000
34.000
5.100
7
168.71
191.87
21.59
6.79
20.88
5
22.6
13.02
4.22
22.16
6.28
19
6.5

14
2-4 Layout - CI270CW
CDG1
CUL2
CKM1
CUL1
CC22
CC23
CVO11
CVO1
JSC3
JSC33
FAN1
SWP13
CPI11
CKM11
JVC2
JSV1
CC21
JVC1
CC11
LPT1
CU7
CFP2
CPI1 SODIM1
SWP1
JSP1
CA3
CA1
CA2
CU12
LED2
LVDS1
JSD1
JVL1
CPP1SATA2
SATA1
JSB1
JUSB2
JUSB1
CU8
JVP1
LED1
CFP1
SWP12
JVF1
JSF1 CO1
CF1
CAL1 CIO1
CIO2JVU8
CAR1 CPO1
CT1
IDE1
CA12
CVI1
JVC4
CC5
CC6
CG11
CC12
FAN2
MPCE1
JVC3
JSC34
JSC32
JSC31CC34

15
2-5 Diagram - CI270CW
CDG1
CUL2
CUL1
CC12
JSC3
JSC33
FAN1
SWP13
CKM1
JVC2
CC21
JVC1
LPT1
CU7
CFP2
CPI1 SODIM1
SWP1
JSP1
CA3
CA1
CA2
CU12
LVDS1
JSD1JVL1
CPP1
SATA2
SATA1
JSB1
CU8
JVP1
LED1
CFP1
SWP12
JVF1
JSF1 CO1
CF1
CAL1 CIO1
CIO2
JVU8
CAR1 CPO1
CT1
IDE1
CA12
CVI1
JVC4
CC5
CC6
CG11
FAN2
MPCE1
JVC3
JSC34
JSC32
JSC31 CC34